Full Description
So how do I get set up?
It's simple. Plug the mic output (found on the back of
the receiver) into a channel on your mixing desk. Just like a normal wired
mic.
Press the group button on the receiver to perform a
Quickscan. This searches your environment to locate the clearest frequency for
your performance.
Plug your SM31 headset into the TGQ connection on the
transmitter. Use the group and channel buttons to ‘pair’ the transmitter to the
receiver. The 'ready' LED on the receiver will light up. Finally, turn up the
transmitter gain dial to suit your voice. And it's as easy as that! You can now
perform with wireless freedom.
SM31FH Headset Microphone
The SM31 Fitness Headset has been specially made for
aerobics and fitness instructors. Its rugged, wire-form design is built to
last, and will stay in place even during high energy workouts. And because it's
been assembled with lightweight components, you can comfortably wear it for hours.
It sounds exceptionally clear too, offering the same quality
as Shure’s famous handheld mics. And thanks to moisture resistant fabrics, the
mic capsule is completely safe from sweat.
Comprehensive monitoring
With a Shure BLX System, you get wireless freedom with total
peace of mind. The receiver’s ‘ready’ LED, telling you when your system is set
up and secure. You don’t need to worry about signal dropouts.
If the channel starts clipping, an LED switches from green
to red, letting you know when to adjust the transmitter's gain. There is even
an LED monitor to tell you when the batteries are running low on the
transmitter. Everything about the BLX Wireless System is clear and simple, for
effortless setup straight out the box.
Legendary Shure durability
Boasting the tour-tough construction Shure are revered for.
The BLX14UK/SM31-K3E has been rigorously tested to make sure
it can handle any environment. All Shure wireless systems are subject to heat,
cold, humidity and the ‘Shure drop test’. They are built to survive the demands
of life on the road. They’re ready for every performance.
Included in the Box
- 1 x
SM31FH-TQG Headset Microphone
- 1 x
BLX1 Body Pack Transmitter
- 1 x
Shure BLX4 Analogue Single Channel Receiver
- 1 x
Clothing Clip
- 2 x
Windshields
- 1 x
Power Supply
- 2 x
AA battery
Features
Shure SM31FH-TQG Headset Mic
- Comfortable
and lightweight wire frame design
- Moisture
resistant fabrics protect mic from sweat
- Super
secure fit even during high energy workouts
- Clear,
detailed sound similar to quality handheld mics
- Cardioid
polar pattern focuses only on your voice
- Flexible
gooseneck for quick, easy adjustments
- Windscreen
tames wind and breath noise
- Clothing
clip keeps cable tucked away
- Permanently-charged
condenser capsule (phantom power not required)
- TA4F
(TQG) connector compatible with any Shure bodypack
BLX1 Body Pack Transmitter
- 14-hour
run time and a 100 meter range from one pair of AA batteries
- Quick
and easy frequency matching
- Continuously
adjustable gain dial
- Easily
accessible on/off switch
- Power
& battery status LED
- Clip-on
design easily attaches to performer
- Lightweight,
comfortable and discrete build
- Rugged
and robust - built for rigorous live performances
- TA4F
(TQG) connection for use with Shure headset, lavalier, instrument mics and
guitar cables
BLX4 Single Channel Receiver
- User
friendly and intuitive design – no complicated setup options
- One
touch QuickScan finds the best open frequency for uninterrupted signal
- Internal
microprocessor-controlled antenna keeps the unit discrete and compact
- Two
colour LED for monitoring signal level
- Compatible
with up to 12 other systems
- XLR
& 1/4" audio outputs
Specifications
SM31FH Headset Microphone
- Connector: TA4F
(TGQ)
- Type: Condenser
- Frequency
Response: 45Hz - 20kHz
- Polar
Pattern: Cardioid
- Output
Impedance: 600Ω
- Audio
Output Level: -50 dBV/Pa
- Signal-To-Noise
Ratio: 66dB
- Maximum
SPL: 145.0 dB
- Dynamic
Range: 117 dB
- Equivalent
Output Noise: 28 dB
- Power
Requirements: +5 V DC, 10 V Maximum
- Cable
Length: 1.1m
- Net
Weight: 60 g
BLX1 Body Pack Transmitter
- Connector
Type: TA4F (TGQ)
- Operating
Range (Up To): 100 m
- Batteries: AA
(included)
- Battery
Life: 14 hour
- Battery
Status: Multi-Colour LED
- Transmitter
Housings: Molded ABS
- Gain
Adjustment Range: 26 dB
- Included
Antenna: 1/4 Wave
- Input
Impedance: 1 MΩ
- Weight: 75
g
- Dimensions
(H x W x D): 110 mm x 64 mm x 21 mm
BLX4 Single Channel Receiver
- Transmission: Analog
- Power
Supply: External
- Receiver
Type: Single
- Number
Of Compatible Systems Per Frequency Band: 12
- Receiver
Displays: LEDs
- Housings: Molded
ABS
- Scan
Features: Quick Scan
- Rack
Hardware: Optional URT2
- Image
Rejection: 50 dB, Typical
- RF
Sensitivity: -105 dBm, For 12dB SINAD, Typical
- Weight: 241
g
- Dimensions
(H x W x D): 40 x 188 x 103 mm