1.The module adopts imported chip, with low static power consumption, 500KHZ low ripple output, high conversion efficiency.
2. Small size, limited heat dissipation capacity, continuous use of current is recommended below 2A, the maximum voltage is recommended not to exceed 28V is appropriate.
3. Low ripple, multiple protection, safety, output short circuit protection, built-in over-temperature protection.
4. Product design, materials, PCB process with enough effort, so that the module can be done in a very small volume above the very impressive parameters and features.
5. High conversion efficiency, up to 93% conversion efficiency.
Input: DC30V(Max)
Current output:3A max
Static current:0.6mA
Conversion efficiency:up to 93%
500KHZ low ripple
Output short circuit protection
Built-in over-temperature protection
Operating Temperature:-40℃ to +85℃
Short size:17mm*13mm*4.6mm
Long size: 28mm*15mm*5.7mm
Hole diameter: 2.6mm
Main uses: low voltage step-down, digital products, MCU power supply, ripple requirements, slightly higher circuit step-down.
IN+: DC input positive 4.5V-30V (need to be higher than the output 1V or more).
IN-:DC input negative terminal, connected with output negative terminal.
Output +: DC output positive.
Output-:DC output negative pole, connected with input negative pole.
1X module
◆ The input of the product should be greater than the output voltage, and it is better to keep the voltage difference above 1V, and the input can not be connected in reverse, and the board will be burned when connected in reverse.
◆ When wiring, it is best to disconnect the power supply, otherwise when the voltage is high, it is easy to spark, so there will be a certain risk of striking the chip, breakdown chip.
◆ Wiring should not be too fine, ensure that the wire can withstand the corresponding current.
◆ Inductive loads should be well protected to avoid excessive reverse electromotive force beyond the range of the chip.
◆ The higher the power of the module, the closer the current is to the maximum current. Pay attention to heat dissipation when using the module.
◆When there is no additional heat dissipation, the continuous use current is recommended to be below 5A, more than 5A needs additional heat dissipation, otherwise it will overheat to protect the output.
◆ The use of voltage is recommended to be below 24V, because if the supply voltage is not very stable, the spike voltage over 25V will trigger the chip internal over-voltage protection, in order to stabilize the operation, leave some margins appropriately.
◆ When the use of problems, contact customer service must cooperate with customer service to provide wiring pictures, use video, etc., do not accept only provide text information.
1. We accept PayPal payment ONLY, and must be received within 5 days from the date of purchase.
2. It is easy and safe for you to pay by credit cards, debit cards, bank transfers and PayPal account balances. 3.Buyers are responsible for import duties,custom fees and taxes, if any, please check your country.
1. We only ship to the confirmed address provided by eBay. please make sure your ebay address is 100% matches the address you would like us to ship to. If not, please let us know before we sent you the package, or we will not be responsible for any loss. hope you could understand.
2. Orders will be processed instantly and dispatched within 1-2 business days except hoilday, so we do NOT accept any email/message note after you place orders.
3. All package need to wait 30 days,Please take care it.Less than 30 days,we can't take a refund.
1. We greatly appreciate your POSITIVE feedback. Please do NOT leave negative feedback without asking for help.
2. Please DON'T leave negative or neutral feedback if you haven't received item in 30 days, because we have mentioned the shipping time repeatedly.
1. We believe our items are so outstanding. We are convinced you will be happy with your Purchase.
2. If you do not satisfy with our items. Please simply return to us within 30 Days in original condition. Just pay for the returned postage. Then we can issue full refund or resend the item to you after the returned item arrived at our warehouse.
3. Please include your eBay ID and item number with any email requests.
1. If you have any questions, please feel free to email our service specialists.
2. Just contact us using the " Ask the seller a question" link on eBay.
3. Our aim is to provide Top Level Customer Service, normally so we will try our best to solve any problem.