Center Grab Handle Stripe Overlay (Standard Series) - 2021+ *Bronco

Change the color of your center grab handle Install video below Center Grab Handle Stripe OverlayStandard Series Vinyl We have knocked out the driver and passenger side grab handles, however that left the center grab handle to do. Some vehicles are not equipped with these so we didn't include them with the outer ones. Customize your interior and choose from an array of colors. Tune your interior to your own liking. Ships with 2 sets of overlays. You only need to use one, but we don't like our customers to be stranded without a backup. NOTE: Badlands Orange is the closest vinyl color we could find to the interior of the Badlands. In certain light it looks very similar. In darker light it looks a little lighter, but is much closer than a standard orange. Badlands Grey is close to the dash color. Please see photos. Does not fit Bronco Raptor with carbon fiber package. INSTALLATION Ideal temperature - 75-80 degrees, not in direct sunlight Clean the application area and apply the vinyl using a dry installation. Make sure the area is clean and free of dust, debris, dirt, Armor All, etc. Some will choose to clean the application area with rubbing alcohol which is okay. "Rubbing alcohol will not damage car paint if it is diluted to between 10% and 15%. Since rubbing alcohol evaporates quickly, it doesn't damage car paint." Make sure the installation area is completely dry before attempting an install. To in crease adhesion, use heat from a hair dryer or light heat from a heat gun. Use of optional 3M primer pens can increase adhesion. Please watch the video carefully. Initial placement is important, but the material can stretch as needed.