Dark Smoke Sidemarker Overlays - 2020+ Supra

Dark Smoke Sidemarker Overlays Sticker Fab has distributed over 20,000 vinyl products in the last few years! This new platform will be a great canvas for their accents and protection items. Sold as a set of four (left front / right front / left rear / right rear). Knock out the orange and red sidemarker with some dark smoke overlays. The material used to craft these is made in Germany and a standard across the industry for darkening headlights, tail lights, and other lamps. Installation NOTE: The longer sidemarker overlays are for the rear. Clean the application area and make sure it is clear of any dirt, debris, and ideally wax. Having a hair dryer or heat gun handy can aide in installation, but we've been able to install this without either in the middle of winter. Start at the top of the sidemarker, align the vinyl there and work your way toward the bottom. You can use a wet installation if you want, however this is also not required. When you do not use a wet installation you need to be sure there is absolutely no dirt or it will get stuck in between the sidemarker and vinyl with no way out. The hair dryer or heat gun would be used to dry out the water after install. Just make sure that it is not too hot of air. If it can burn you it is probably too hot for drying out the vinyl.