Topographic Rear Vent Window Overlay (Perforated) - 2025+ 4Runner

Topographic map design Made in the USA Perforated material allows you to still see through the window Install video below 2025+ Toyota 4Runner Rear Vent Perforated Topographic Map Overlays These topo map designs great in the rear windows of the Toyota 4Runner It's a theme tons of off-roaders have embraced as we set off across the country, enjoying, roads, ruts, trails, beaches, and more. Fully printed at our Fort Myers office. NOTE: This comes as a left and right pair. There is a border around the edge to make installation easier and prevent interference of rubber gaskets. This material installs just like our solid printed window vinyls, however it stretches a little bit more easily. Be careful, install in the shade in 70 degree or warmer weather. If you stretch it, you may need to pull it back up or trim. Handle product with care when cleaning and maintaining it. No abrasive items can be used on the material. DO NOT USE a squeegee to install. Just use your fingers. Install Notes Do a wet install in 70 degree or above weather. Make sure you are not in direct sunlight. DO NOT USE a squeegee for this install as you will use your fingers to press down on the vinyl. Quick Install Video Customizable Please contact us if you need additional colors. Use our contact form to get in touch with us. Long Install Video Clean the application area to prepare it for installation. Use glass cleaner to prepare the area.NOTES: We recommend that the installation area be free of wax and not under direct sunlight. Microfiber Glass cleaner Soapy Water (we recommend our StickerFab Installation Fluid) Heat Gun or Hair Dryer (optional) Wet installs require one drop of dish or hand soap in a cup of water. Apply to the vinyl so that the first attempt doesn't make the vinyl permanently stick to the surface. You DO NOT need a squeegee for this material. Just use your fingers!Try doing the install in the shade so it doesn't heat up the vinyl rapidly. Try to even out the gaps at the ends. Because of the rubber trim we wanted to leave a little room for error in alignment.Watch our video for more details. We purposely did a long installation and did not skip any parts. You may fast forward and rewind at your own leisure.