Gas Powered T-Post Driver 2-Stroke Gasoline Engine Fence Farm Push Pile Digger
Application
This pile driver is suitable for fencing, star pickets, posts, stakes, pipe driving, gardening, agriculture, geophysical exploration, construction, etc.
Specification
Engine Type: Two-stroke, Air Cooling, Single-cylinder
Displacement: 52cc
Fuel Tank Capacity: 1L/0.26gal
Fuel Consumption Rate: ≤0.6L/h
Impact Frequency: 1300-3000BPM
Impact Energy: 20-55J
Carburetor Type: MZ15-048
Spark Plug Type: BM6A
Starter System: Hand Pull Start
Fuel Type: Mixed Oil (25 Gasoline: 1 Motor Oil)
Size: approx. 74*34*26cm/29.13*13.39*10.24in
Post Driving Head Mount Size: 55-70mm/2.17-2.76in
Max. Power & Speed: 1900W(2.3HP)/6500r/min
Max. Torque & Speed: 2.5N.m/5500r/min
Package Included
1 x Petrol Post Driver
2 x Post Driving Head
1 x Mixing Oil Bottle
1 x Tools Kit
Notes
- If the pile driver has the problem of not hammering. Then you need to check whether you have added too much grease, clean up the excess oil in the cylinder before disassembly, and re-add about 20g of high temperature resistant grease.
- If the impact frequency is too high, you can reduce the speed of the carburetor slightly if you can't hold it by hand. Otherwise, the impact frequency should be increased.
- If the machine does not start easily, first check the ratio of oil: gasoline: oil = 25:1, be sure to use a good two-stroke oil. Start the rope pull out an arm's length, and pull it two or three times in a row to start. When the machine starts cold, close the damper, and then open the damper after the machine is normal.
- Please allow the slight color difference caused by the shooting light and 1-3cm error due to manual measurement, and make sure you don't mind before you order.