1/8 Inch Pneumatic Valve 12V 3 Way 2 Position Electric Air Solenoid Valve Manual
What is this?
Pneumatic solenoid valve is an automation component used to control air flow. It is widely used in various industrial that require the control of gas flow, such as the compressed air brake system of railway vehicles.
What will I get?
Electric Air Solenoid Valve
Working Pressure: 0-60℃
Volt: DC12V
Fluid Temperature: 0.15-0.8MPa(25~116Psi)
Total Size: 9x2.7x1.4cm/3.5x1.06x0.55 Inch(H*BD*TD)
Thread Size: 1/8” NPT
Connector Size: 22x12x8 mm/0.86x0.47x0.3 Inch(L*W*T)
Muffler Size: 25x12x7 mm/0.9x0.47X0.27 Inch(L*W*T)
In the Package: 1 x Pneumatic Valve, 2 x Connector, 1 x Muffler, 1 x Raw Tape
Are there any advantages of the product?
The pneumatic solenoid valve control system is stable and reliable, does not require preheating or pre cooling, and is suitable for continuous operation and frequent start and stop. Made of aluminum alloy, it has high hardness, corrosion resistance, good heat dissipation and long service life.
How to use it?
Connect the pipeline of the pneumatic manual control valve in the direction of the arrow on the valve body (make sure the flow direction is correct). Use raw tape or sealant to enhance the air tightness of the threaded interface. Avoid severe vibration or external force impacting the valve body
What should I notice?
Before installation, confirm that the voltage matches the nominal voltage of the solenoid valve. Avoid long-term exposure to highly corrosive gases. Be sure to cut off the power supply and release the pressure before maintenance!
Pneumatic solenoid valve is an automation component used to control air flow. It is widely used in various industrial that require the control of gas flow, such as the compressed air brake system of railway vehicles.
What will I get?
Electric Air Solenoid Valve
Working Pressure: 0-60℃
Volt: DC12V
Fluid Temperature: 0.15-0.8MPa(25~116Psi)
Total Size: 9x2.7x1.4cm/3.5x1.06x0.55 Inch(H*BD*TD)
Thread Size: 1/8” NPT
Connector Size: 22x12x8 mm/0.86x0.47x0.3 Inch(L*W*T)
Muffler Size: 25x12x7 mm/0.9x0.47X0.27 Inch(L*W*T)
In the Package: 1 x Pneumatic Valve, 2 x Connector, 1 x Muffler, 1 x Raw Tape
Are there any advantages of the product?
The pneumatic solenoid valve control system is stable and reliable, does not require preheating or pre cooling, and is suitable for continuous operation and frequent start and stop. Made of aluminum alloy, it has high hardness, corrosion resistance, good heat dissipation and long service life.
How to use it?
Connect the pipeline of the pneumatic manual control valve in the direction of the arrow on the valve body (make sure the flow direction is correct). Use raw tape or sealant to enhance the air tightness of the threaded interface. Avoid severe vibration or external force impacting the valve body
What should I notice?
Before installation, confirm that the voltage matches the nominal voltage of the solenoid valve. Avoid long-term exposure to highly corrosive gases. Be sure to cut off the power supply and release the pressure before maintenance!
Hot Item
- We accept eBay payment.
- Please do not email us to ask for other payment option.
- We appreciate prompt payment and look forward to your business in the future. Unpaid item will be filed without receiving payment in 7 days from listing ended.
- Usually we ship your order out within 24 hours in business day.
- For shipping and handling charges (S&H) for specific item, please refer to the item listing page for more details.
- Please make sure your shipping address is correct. We are not responsible for any loss in transit if a wrong address is provided.
- Returns for exchange are permitted and must be initiated by the buyer within 30 days upon receipt.
- If you would like to return your product(s) for repair / replacement / refund, please kindly contact our customer service representatives via email for an authorized RMA number. Your returned product(s) will not be processed without a completed RMA.
- We are continually expanding our product selection to better serve your need.
- We look forward to providing the best sevice to you - our dear customers, so take a look around our store and find the product that you want. You can put your trust in us!
- If you need any help or have any suggestions, please don't hesititate to contact us anytime , we will reply you within 24 hours and try the best to help you.
1/8 Inch Pneumatic Valve 12V 3 Way 2 Position Electric Air Solenoid Valve Manual
What is this?
Pneumatic solenoid valve is an automation component used to control air flow. It is widely used in various industrial that require the control of gas flow, such as the compressed air brake system of railway vehicles.
What will I get?
Electric Air Solenoid Valve
Working Pressure: 0-60℃
Volt: DC12V
Fluid Temperature: 0.15-0.8MPa(25~116Psi)
Total Size: 9x2.7x1.4cm/3.5x1.06x0.55 Inch(H*BD*TD)
Thread Size: 1/8” NPT
Connector Size: 22x12x8 mm/0.86x0.47x0.3 Inch(L*W*T)
Muffler Size: 25x12x7 mm/0.9x0.47X0.27 Inch(L*W*T)
In the Package: 1 x Pneumatic Valve, 2 x Connector, 1 x Muffler, 1 x Raw Tape
Are there any advantages of the product?
The pneumatic solenoid valve control system is stable and reliable, does not require preheating or pre cooling, and is suitable for continuous operation and frequent start and stop. Made of aluminum alloy, it has high hardness, corrosion resistance, good heat dissipation and long service life.
How to use it?
Connect the pipeline of the pneumatic manual control valve in the direction of the arrow on the valve body (make sure the flow direction is correct). Use raw tape or sealant to enhance the air tightness of the threaded interface. Avoid severe vibration or external force impacting the valve body
What should I notice?
Before installation, confirm that the voltage matches the nominal voltage of the solenoid valve. Avoid long-term exposure to highly corrosive gases. Be sure to cut off the power supply and release the pressure before maintenance!
Pneumatic solenoid valve is an automation component used to control air flow. It is widely used in various industrial that require the control of gas flow, such as the compressed air brake system of railway vehicles.
What will I get?
Electric Air Solenoid Valve
Working Pressure: 0-60℃
Volt: DC12V
Fluid Temperature: 0.15-0.8MPa(25~116Psi)
Total Size: 9x2.7x1.4cm/3.5x1.06x0.55 Inch(H*BD*TD)
Thread Size: 1/8” NPT
Connector Size: 22x12x8 mm/0.86x0.47x0.3 Inch(L*W*T)
Muffler Size: 25x12x7 mm/0.9x0.47X0.27 Inch(L*W*T)
In the Package: 1 x Pneumatic Valve, 2 x Connector, 1 x Muffler, 1 x Raw Tape
Are there any advantages of the product?
The pneumatic solenoid valve control system is stable and reliable, does not require preheating or pre cooling, and is suitable for continuous operation and frequent start and stop. Made of aluminum alloy, it has high hardness, corrosion resistance, good heat dissipation and long service life.
How to use it?
Connect the pipeline of the pneumatic manual control valve in the direction of the arrow on the valve body (make sure the flow direction is correct). Use raw tape or sealant to enhance the air tightness of the threaded interface. Avoid severe vibration or external force impacting the valve body
What should I notice?
Before installation, confirm that the voltage matches the nominal voltage of the solenoid valve. Avoid long-term exposure to highly corrosive gases. Be sure to cut off the power supply and release the pressure before maintenance!
- We accept eBay payment.
- Please do not email us to ask for other payment option.
- We appreciate prompt payment and look forward to your business in the future. Unpaid item will be filed without receiving payment in 7 days from listing ended.
- Usually we ship your order out within 24 hours in business day.
- For shipping and handling charges (S&H) for specific item, please refer to the item listing page for more details.
- Please make sure your shipping address is correct. We are not responsible for any loss in transit if a wrong address is provided.
- Returns for exchange are permitted and must be initiated by the buyer within 30 days upon receipt.
- If you would like to return your product(s) for repair / replacement / refund, please kindly contact our customer service representatives via email for an authorized RMA number. Your returned product(s) will not be processed without a completed RMA.
- We are continually expanding our product selection to better serve your need.
- We look forward to providing the best sevice to you - our dear customers, so take a look around our store and find the product that you want. You can put your trust in us!
- If you need any help or have any suggestions, please don't hesititate to contact us anytime , we will reply you within 24 hours and try the best to help you.