Specification: 1. Operating voltage: 125V AC/ 60Hz. 2. Temperature Control range: 41℉-86℉. Precision: ±3℉. 3. Dimensions: 5 x 2.3 x 1.5 inches 4. Load (max): 125VAC@15A 1875W -- resistive load. 1/2HP@125VAC, TV-5 -- inductive load 5. Mode: Heat and Cool 6. Power Cord: 3 Prong/4.9FT 7. Temperature probe wire: 5.7Ft
Warm tip: 1. Please read the instruction manual carefully before use and contact us if you have any questions. 2. Applied indoors only and do not be exposed in sunshine. 3. Recommended ambient temperature is 50℉ to 104℉. Winding risk may exist, please keep our product away from children ⭐【Upgrade Structure】 4.9 ft grounded 3 prong plug power cord that won't block the entire thermostat outlet panel, more space efficient compared to wall mount plug in thermostat outlet; 5.7ft temperature probe cord for more accurate temperature detection, can be applied in almost any application you can imagine ⭐【Heating and Cooling Modes】 The thermostat plug outlet has two thermostatic modes, heat and cool, you can switch the mode by pushing the button on the back of the panel; Use the cool mode in summer for cooling appliances such as air conditioners, attic fans, greenhouse fans, and heat mode in winter for space heaters, ice melters to meet your multiple needs ⭐【Easy To set】 Plug and play, easy to use; With an adjustable temperature range of 41-86 degrees Fahrenheit and clear white temperature markings and arrows on the faceplate, the plug in thermostat for heater is easy to set the ideal temperature by rotating the button, making it easy for even the elderly to operate ⭐【Safe Circuit Protection】 Rated voltage: 125VAC 60Hz, Maximum load: 15A 1875W, the thermostat controlled outlet plug has a restorable overload short circuit function to protect the circuit safety,enhances safety for long term use ⭐【Variety of Uses】 The plug in thermostat for space heater is suitable for a wide range of power appliances, such as refrigeration, fermentation, greenhouse fan, space heaters, window air conditioners, etc. (Warm Reminder: The controller has a buffer zone of 2-3 degrees before it is turned on again after reaching the set temperature, which is a normal phenomenon