Description

Our door lock hole opener kit is made of high-quality aluminum alloy, steel, plastic, aluminum, and Tungsten steel, and adopts plastic spraying, electroplating, and chrome-plating processes, laying the foundation for your long-term use. The accurate positioning function allows you to complete your work more easily and efficiently. With it, you can say goodbye to the traditional way.

Key Features

Build to Last: Aluminum alloy, steel, plastic, aluminum, Tungsten steel, plastic spraying, electroplating, and chrome-plating  processes make the whole product corrosion-resistant, wear-resistant, and not easy to rust, so it can keep beautiful and practical for a long time.

Accurate Positioning: The combination of a solid locating ring, flexible bearing, positioning block, positioning screws, and ruler allow you to locate more accurately and easily, so as to better complete the drilling work.

Adjustable Design: Through the width adjusting knob, adjusting screw handle, and adjusting slot, you can fine-tune the slide rail to fully meet your needs and provide more convenience for your use.

Good Performance: The smooth guide rail, linear bearing, 0.39inch triangular clamping head, and widened adjusting angle can effectively maintain the stability and smoothness of the opening process, avoid exceeding the cutting area, and also provide a larger clamping range(1.38-3.94inch).

Simple Installation and Use: Simple structure and complete accessories enable you to complete the installation and start using it in a short time.

Easy to Carry and Store: The large-capacity storage case with placement groove, buckle, and handle can effectively prevent items from being lost, and is more convenient for you to store and carry.

Ideal Gift: With good performance, this product can be used as a gift for family, friends, and lovers who are engaged in the decoration and maintenance industry to make their work easier.

Complete Kit: The package of this product includes all accessories required for installation and use, so you don't need to purchase separately, which is convenient and affordable.

Details

Round Corners: Compared with traditional square corners, an arc design can better care for your skin.

Anti-slip Pads: Four support legs with anti-slip pads can not only maintain stability during the clamping process but also effectively prevent your door from being scratched.

Application

This product is suitable for 1.38-3.94inch thick wooden doors, copper and aluminum doors, stainless steel doors, and steel-wood doors. It is very suitable for families, decoration plants, repair plants, etc. to open new lock holes, side holes, eccentric lock holes, magnetic card lock holes, change password locks, fingerprint locks, cut mortices of lock bodies and panels, door hinge slots, etc. It is compatible with all electric drills with a clamping range of 0.39inch, and is an ideal choice for carpenters, maintenance personnel, etc.

How to Use

• First, remove the locating ring and put it aside, then remove the knife stick from the bracket.
• Place the knife rod stand on the slide rail workbench and fix the knife rod stand on the workbench by adjusting the screws.
• Turn the drill handle of the knife bar inwards, Pierce it through the base cloth of the bracket, and then fix the trap.
• Take out the lock core, mark the height with a pen at the position where the door lock is stalled, and then mark the position of the keyhole with the lock core at the position of the door handle.
• Install the assembled slotting machine on the door plate, align the knife head of the knife bar with the marked position of the upper and lower lock core, and then adjust the potioning screw to fix the upper and lower position to confirm the working area of the knife bar.
• Then mark the depth length of the lock core on the back of the cutter, and fix the positioning ring with a hexagon wrench.
• Finally, install the electric drill, hold the tool holder in your left hand, hold the power tool in your right hand, and push the tool at a constant speed. After drilling to a certain depth, slowly move out, and then move up at a constant speed in your left hand. When you reach the top, move down again at a constant speed, and slowly push the tool until the final completion.

Specification 

Style: Modern

Material:  Aluminum Alloy, Steel, Plastic, Tungsten Steel

Surface Treatment: Plastic Spraying, Electroplating, and Chrome Plating

Color: Gold

Number of Items: 1

Assembly Required: Yes

Mount Type: Free Standing

Suitable Door Thickness: 3.5-10cm/1.38-3.94inch

Electric Drill Chuck Diameter: 10mm/0.39inch

Maximum Lock Body Distance: Universal

Maximum Slotted Depth: 13cm/5.12inch

Maximum Slotted Length: 43cm/16.93inch

Length of Ruler: 30cm/11.8inch

Net Weight: 4.2kg/9.26lbs

Gross Weight: 5kg/11.02lbs

Package Size: 50*12.5*22.5cm/19.69*4.92*8.86inch

Overall Size(L*H): 43*27cm/16.93*10.63inch

Storage Case Size: 49*11*21cm/19.29*4.33*8.27inch

Package Included

1* The Main Body of the Slotting Machine

1* Storage Case

1* Woodworking Flat Groove

2* Adjusting Screw Buckles

3* Tungsten Steel Blades

1* Triangular Chuck Connecting Rod

2* 12 #/14# Open-end Wrenches

1* Positioning Block

4* Set Screws

2* 7-shaped Universal Adjustment Screws

1* 30cm/11.8inch Steel Ruler

All Accessories for Installation

Notes

• Please note that when the product is applied to stainless steel doors and steel-wood doors, it needs to be equipped with high-speed steel knives. The electric drill with a higher rotational speed should be used to operate the wooden doors, while the electric drill with a lower rotational speed should be used for steel iron doors.
• If you are using it for the first time, it is recommended to make a used cut on other discarded boards of equal thickness to avoid damaging your new wooden door.
• Please allow the slight color difference caused by the shooting light and 1-3cm error due to manual measurement, and make sure you do not mind before ordering.