Features:
Adjustable pulse spot welding machine (Dingxing butt welding machine)
Power supply: AC220V-110V Power: 200W/300W/400W
Welding current: 0.5-30A continuously adjustable (pulse ignition) (0.5-30A) (0.5-50A) (0.5-80A)
Standard accessories: power cord, foot switch, work clamp, tungsten needle holder, tungsten needle/instructions
Product introduction:
The spot welding machine can be used for the rapid welding of platinum, gold, K gold, silver, steel, ring mouth, melon buckle, precision welding of thin wires, and direct welding without solder powder. The solder joints are smooth.
1. Using the principle of plasma high-frequency discharge, a molten pool is instantly formed at the metal weld
2. Adjust the output power according to different sizes of wires
3. The welded workpiece is smooth, firm, fast, and efficient
Technical Parameters:
Power supply: 220V 50/60HZ
Maximum current can reach: 80A
Installation and debugging:
1.The electrode clamp is connected to the output negative pole, and the electrode holder is connected to the output positive pole.
2.The tungsten needle can be sharpened on the grinder and work using the principle of tip discharge.
3.Tungsten needle diameter 1.5mm
Steps:
1.Turn on the power and turn on the power switch
2. Adjust the power knob, divided into coarse adjustment and fine adjustment. The scale value can be adjusted arbitrarily according to work requirements
3. Clamp the workpiece with tweezers. The workpiece interface is aligned with the tungsten needle (the best distance is 5mm) and the workpiece cannot be touched.
4. Step on the foot switch with your foot. (Remove your foot). Spot welding is complete.
Precautions:
1. The foot can not be stepped on the foot switch for a long time, step on it and remove it immediately.
2. This machine is precise, please use it with care.
3. The flash is harmful to the eyes, please take protective measures when using it. 4 When stepping on the foot switch, do not touch the tungsten needle and the metal part of the tweezers at the same time, otherwise there will be a needle puncture feeling.
5 Non-professionals please do not disassemble and repair, there is high voltage inside.
Note:Only 0.5-1.5mm diameter can be welded, too thick or too thin can not be welded
Notice: Because,the international air shipping forbid to ship liquid,powder and batteries, If you purchased goods containing such items, we will not be putting them packing. Thank you for your support.
Shipping
Please read this before buying International Shipping may Be Delayed Due to Customs. Customers are Responsible For All Import Charges, Tariffs, Duties, Taxes, and Fees Associated with Import of the product. Shipping Charges does not include any Import Charges, Tariffs, Duties, Taxes, and Fees Associated with it. We are not responsible for undeliverable address.We reserve the right to charge the shipping fee again for returned items due to wrong address.
Contact us
We work 6 Days a week From 9:00am - 6:00pm Monday - Saturday CHINA Time.Please contact us with any comments, questions or suggestions that you may have bysending ebay message, All the mail will be replied within 24 hours. Please ensure your mail box would not blocked / filtered our mails.