Product Description

labeler machine with tape
label maker machine with tape

print clearly

two power method

multi-copy editing

Print clearly and Manual cut

Turn on the “cutting" of the menu function, and the screen will prompt you to cut each time you finish printing, so that you can keep track of the printing status of the label at any time.

Two power supply modes

This E1000 label printer Powered by AC Adapter (included) or 6AAA Batteries (not included), meet the requirement for indoor or outdoor.

Efficient and Save Tape

Multi-copy editing printing design of the machine, and "shift + print" to meet your requirement for the different labels or identical labels printing.

Widely Application

home label maker
power

Note:

1.In order to avoid the situation that the labeling machine cannot be turned on,

  • AC adapter and AAA batteries cannot be used at the same time.
  • Please pay attention to the installation direction of the positive and negative poles of the battery. The wrong installation will also cause the labeler to fail to turn on.
  • In some areas, the label machine cannot be turned on by using an AC adapter, which may be due to low voltage. You can try to use 6AAA battery to test whether it can be turned on normally.

2. To prevent the label tape from jamming,

  • Please make sure the extend some end of tape (about 2 to 3 cm) to the outlet of labeller before printing.
  • Do not press the cutter during printing, the label maker will prompt you to cut after each print if you choose "Cutting-ON" in Setting.
package

Using Tips:

1.In order to avoid the situation that the labeling machine cannot be turned on,

  • AC adapter and AAA batteries cannot be used at the same time.
  • Please pay attention to the installation direction of the positive and negative poles of the battery. The wrong installation will also cause the labeler to fail to turn on.
  • In some areas, the label machine cannot be turned on by using an AC adapter, which may be due to low voltage. You can try to use 6AAA battery to test whether it can be turned on normally.

2. To prevent the label tape from jamming,

  • Please make sure the extend some end of tape (about 2 to 3 cm) to the outlet of labeller before printing.
  • Do not press the cutter during printing, the label maker will prompt you to cut after each print if you choose "Cutting-ON" in Setting.

On Jan 13, 2026 at 19:51:11 PST, seller added the following information:

Datacaciques