TDA7294 Audio HIFI Power Amplifier Board DIY Parts Kit PCB Dual Channel 100W*2
Product View
Detail
Product Feature:
1. Adopting high-quality power amplifier chip, model: TDA7294
2. The product adopts high-quality materials and has a long service life
3. The product is loose and needs to be assembled by oneself, making it very suitable for DIY enthusiasts
4. This is a high fidelity dual channel amplifier board
5.200W power product with very stable performance
Product parameters:
1. Audio signal input: dual channel audio signal input;
2. Audio output: dual channel 100W+100W audio output;
3. Circuit principle: 2-way TDA7294 amplification output;
4. Working voltage: DC 24-40V
5. Input impedance: 22K OHM Output impedance: 4-8OHM
6. PCB specification: FR4 50X120X1.6MM
TDA7294 Dual Channel Amplifier Board Material List:
Imported original power amplifier IC TDA7294:2 PCS
1/4W resistor 22K: 6 PCS
1/4w resistor 680:2 PCS
1/4W resistor 10K: 2 PCS
1/4W resistor 30K: 2 PCS
1W resistor 10R: 2PCS
2W resistor 10R: 2PCS
Diode 1N4148:2 PCS
Thin film capacitor 100NF: 4PCS
Thin film capacitor 10PF: 2PCS
Electrolytic capacitor 22UF: 6PCS
Electrolytic capacitor 47UF: 2PCS
Thin film capacitance 2.2UF: 2PCS (axial coupling capacitance)
Inductance 5UH: 2PCS
7.62 sockets, 2 positions, 3 positions, 1 PCS each
5.0 Socket: 2PCS
Circuit board double-sided FR4 50X120X1.6MM: 1PCS
Introduction to circuit principles:
Dual channel TDA7294 amplification design, symmetrical design of left and right channels, one point grounding, no current sound, no noise, dual output of 100W, with some improvements made to the circuit.
1. The input port is connected in parallel with a 330P small capacitor. This method has two advantages: first, it can form a low-pass with R1, filter out some unnecessary residual Super high frequency, make the sound smoother, and also reduce the burden of the amplifier. The second is to eliminate circuit self-excitation.
2. A 10PF capacitor is connected in parallel to the feedback resistor, making the sound more transparent.
3. Use Bell networks and output inductors to prevent high-frequency self-excitation and compensate for the output.
The above modifications, compared to many circuits, with a good power supply, can basically achieve over 99% performance of 7294. The voltage feedback is negative, and the performance is stable. Replacing different feedback capacitors can modulate different tones, suitable for grinding machines.
Shipping list:
Package 1: DIY loose parts X1
Package 2: Finished module X1
Copyright © 2017 DataDaciques
Product View
Detail
Product Feature:
1. Adopting high-quality power amplifier chip, model: TDA7294
2. The product adopts high-quality materials and has a long service life
3. The product is loose and needs to be assembled by oneself, making it very suitable for DIY enthusiasts
4. This is a high fidelity dual channel amplifier board
5.200W power product with very stable performance
Product parameters:
1. Audio signal input: dual channel audio signal input;
2. Audio output: dual channel 100W+100W audio output;
3. Circuit principle: 2-way TDA7294 amplification output;
4. Working voltage: DC 24-40V
5. Input impedance: 22K OHM Output impedance: 4-8OHM
6. PCB specification: FR4 50X120X1.6MM
TDA7294 Dual Channel Amplifier Board Material List:
Imported original power amplifier IC TDA7294:2 PCS
1/4W resistor 22K: 6 PCS
1/4w resistor 680:2 PCS
1/4W resistor 10K: 2 PCS
1/4W resistor 30K: 2 PCS
1W resistor 10R: 2PCS
2W resistor 10R: 2PCS
Diode 1N4148:2 PCS
Thin film capacitor 100NF: 4PCS
Thin film capacitor 10PF: 2PCS
Electrolytic capacitor 22UF: 6PCS
Electrolytic capacitor 47UF: 2PCS
Thin film capacitance 2.2UF: 2PCS (axial coupling capacitance)
Inductance 5UH: 2PCS
7.62 sockets, 2 positions, 3 positions, 1 PCS each
5.0 Socket: 2PCS
Circuit board double-sided FR4 50X120X1.6MM: 1PCS
Introduction to circuit principles:
Dual channel TDA7294 amplification design, symmetrical design of left and right channels, one point grounding, no current sound, no noise, dual output of 100W, with some improvements made to the circuit.
1. The input port is connected in parallel with a 330P small capacitor. This method has two advantages: first, it can form a low-pass with R1, filter out some unnecessary residual Super high frequency, make the sound smoother, and also reduce the burden of the amplifier. The second is to eliminate circuit self-excitation.
2. A 10PF capacitor is connected in parallel to the feedback resistor, making the sound more transparent.
3. Use Bell networks and output inductors to prevent high-frequency self-excitation and compensate for the output.
The above modifications, compared to many circuits, with a good power supply, can basically achieve over 99% performance of 7294. The voltage feedback is negative, and the performance is stable. Replacing different feedback capacitors can modulate different tones, suitable for grinding machines.
Shipping list:
Package 1: DIY loose parts X1
Package 2: Finished module X1
1)All items will be shipped to your eBay Address .Please make sure to provide us with correct,precise and detailed shipping address.
2) Economy shipping needs 2-5 weeks to arrive mostly.
In rare case, it can take up to 6-8 weeks.
It depends on your location and local postal service, as well as the weather condition along the shipping.
But the accurate time is depend on the customs .
If you not get it on time , please don't hesitate to contact us .
If you need a tracking number, you could choose Standard Shipping.
We accept PayPal only.
We only ship item to your PayPal verified address.
Please pay attention that import duties, taxes and charges are not included in the item price or shipping charges. These charges are the buyer's responsibility.
Please check with your country's customs office to determine what these additional costs will be prior to bidding/buying.
1.We believe our items are so outstanding. We are convinced you will be happy with your Purchase.
2. If you do not satisfy with our items. Please simply return to us within 30 Days in original condition. Just pay for the returned postage. Then we can issue full refund or resend the item to you after the returned item arrived at our warehouse.
3. Please include your eBay ID and item number with any email requests.
We will work hard to make sure every customer 100 percent satisfied, and reslove any problem for you. We sincerely hope that you can leave us a positive comment once you received the item,We also will leave a positive feedback immediately after payment is received. If for some reason there is any issue with the purchase, please contact us through "My Messages" or "Ask Seller Questions" before leaving neutral or negative feedback,we will be glad to work with you to have it resolved.
Our working time: Monday to Friday, 9:00~18:00
Thanks for your shopping
Am 13.01.2026 hat der Verkäufer die folgenden Angaben hinzugefügt: