Specifications:
Condition: 100% Brand New
Light Source：2 Sides CSP 3570 LEDs
Material: Aviation Aluminum + ABS
Color Temperature: 6000K
Working Voltage: 12V
Output Power: 80W
Number of Bulbs: 2
Waterproof Rate: IP67
Working Temperature: -40℃ - +150℃
Bulb Type: 9008/H13
Beam Type: High Beam/ Low Beam
Beam Angle: 360 Degrees
Lifespan: Over 50,000 hours
Heat Dissipation Principle: Heat Pipe Technology + Aluminum Radiator
Fitment Type: Direct Replacement
Placement on Vehicle: Front, Left, Right
Condition: 100% Brand New
Light Source：2 Sides CSP 3570 LEDs
Material: Aviation Aluminum + ABS
Color Temperature: 6000K
Working Voltage: 12V
Output Power: 80W
Number of Bulbs: 2
Waterproof Rate: IP67
Working Temperature: -40℃ - +150℃
Bulb Type: 9008/H13
Beam Type: High Beam/ Low Beam
Beam Angle: 360 Degrees
Lifespan: Over 50,000 hours
Heat Dissipation Principle: Heat Pipe Technology + Aluminum Radiator
Fitment Type: Direct Replacement
Placement on Vehicle: Front, Left, Right
Parcel Content:
- 2 * 2-side 9008 Headlight Bulbs
New and old packaging will be shipped randomly
Installation Notes:
1. As a safety precaution, make sure that the car has had time to cool down properly before
starting the installation process.
2. Put the vehicle into park or make sure it is securely in gear.
3. Make sure to have the ignition turned off and the keys removed.
4. Be careful to avoid burns, especially when turning on or off the vehicles lighting.
5. Be careful to avoid crushing or cutting the bulbs. Also make sure to not touch the bulbs
with your fingers, as this will cause blotting.
6. Fully examine the connection of the contact points, ports and the wires as faulty
connections can cause lighting problems.
7. Make certain that the end of the bulb does not come in contact with the interior light
shield of the headlight when adjusting the bulb.
8. Please install car headlight dust cover to ensure the normal operation of the lamp
9. Please check the size of your bulbs on your vehicle before purchasing.
10. Please make sure the headlight housing has enough space for installation before purchasing.
11. Professional installation is highly recommended. If you have any questions, please feel free to contact us.
1. As a safety precaution, make sure that the car has had time to cool down properly before
starting the installation process.
2. Put the vehicle into park or make sure it is securely in gear.
3. Make sure to have the ignition turned off and the keys removed.
4. Be careful to avoid burns, especially when turning on or off the vehicles lighting.
5. Be careful to avoid crushing or cutting the bulbs. Also make sure to not touch the bulbs
with your fingers, as this will cause blotting.
6. Fully examine the connection of the contact points, ports and the wires as faulty
connections can cause lighting problems.
7. Make certain that the end of the bulb does not come in contact with the interior light
shield of the headlight when adjusting the bulb.
8. Please install car headlight dust cover to ensure the normal operation of the lamp
9. Please check the size of your bulbs on your vehicle before purchasing.
10. Please make sure the headlight housing has enough space for installation before purchasing.
11. Professional installation is highly recommended. If you have any questions, please feel free to contact us.
Information：
If you are unsure the item fit or not , please do remember send message to tell us your car make, model, year and other information which is helpful to check the item fit or not.
For example:
2004 Ford F150, high/low beam
2015 RAM 1500 with projector-type, high beam
2019 Ford F150 ,XL Crew Cab Pickup 4-Door 2. L
If you are unsure the item fit or not , please do remember send message to tell us your car make, model, year and other information which is helpful to check the item fit or not.
For example:
2004 Ford F150, high/low beam
2015 RAM 1500 with projector-type, high beam
2019 Ford F150 ,XL Crew Cab Pickup 4-Door 2. L