Frequency Voltage Converter Analog Signal Conversion Module 0-1KHz to 0-10V
Product View
Detail
Product Feature:
1. Using high-quality materials, the quality is guaranteed
2. This module can convert the frequency pulse signal into an analog voltage signal
3. It can convert 0-1KHz frequency signal into 0-10V voltage output
4. Small and beautiful appearance
5. Wide application
1. Using high-quality materials, the quality is guaranteed
2. This module can convert the frequency pulse signal into an analog voltage signal
3. It can convert 0-1KHz frequency signal into 0-10V voltage output
4. Small and beautiful appearance
5. Wide application
Wiring Instructions:
VCC: working power
GND: power ground
IN+: Input voltage
IN one: input ground
OCOUT: signal collector output port (use this output port when matching the driver)
FOUT: frequency output port (general frequency output port)
Two independent outputs, OC-OUT is NPN, FREQ-OUT is IC output. The common cathode is used with the negative GND of the power supply, and the common anode is used with the positive power supply. When the common anode is connected with 13-24v power supply, a 2.7KR resistor must be connected in series; when the common anode is connected with 12v power supply, it must be String a 33OR resistor.
VCC: working power
GND: power ground
IN+: Input voltage
IN one: input ground
OCOUT: signal collector output port (use this output port when matching the driver)
FOUT: frequency output port (general frequency output port)
Two independent outputs, OC-OUT is NPN, FREQ-OUT is IC output. The common cathode is used with the negative GND of the power supply, and the common anode is used with the positive power supply. When the common anode is connected with 13-24v power supply, a 2.7KR resistor must be connected in series; when the common anode is connected with 12v power supply, it must be String a 33OR resistor.
Instructions:
Connect the positive and negative poles of the 0-10V voltage signal to IN+ and N- respectively, and there is a corresponding frequency signal output between FOUT and GND.
Correspondence between input and output:
1V = 1KHz
10V = 10KHz
If there is a deviation in the corresponding relationship during use, you can adjust the potentiometer on the board to calibrate.
Connect the positive and negative poles of the 0-10V voltage signal to IN+ and N- respectively, and there is a corresponding frequency signal output between FOUT and GND.
Correspondence between input and output:
1V = 1KHz
10V = 10KHz
If there is a deviation in the corresponding relationship during use, you can adjust the potentiometer on the board to calibrate.
Package list:
Module*1
Module*1
Copyright © 2017 DataDaciques
Product View
Detail
Product Feature:
1. Using high-quality materials, the quality is guaranteed
2. This module can convert the frequency pulse signal into an analog voltage signal
3. It can convert 0-1KHz frequency signal into 0-10V voltage output
4. Small and beautiful appearance
5. Wide application
1. Using high-quality materials, the quality is guaranteed
2. This module can convert the frequency pulse signal into an analog voltage signal
3. It can convert 0-1KHz frequency signal into 0-10V voltage output
4. Small and beautiful appearance
5. Wide application
Wiring Instructions:
VCC: working power
GND: power ground
IN+: Input voltage
IN one: input ground
OCOUT: signal collector output port (use this output port when matching the driver)
FOUT: frequency output port (general frequency output port)
Two independent outputs, OC-OUT is NPN, FREQ-OUT is IC output. The common cathode is used with the negative GND of the power supply, and the common anode is used with the positive power supply. When the common anode is connected with 13-24v power supply, a 2.7KR resistor must be connected in series; when the common anode is connected with 12v power supply, it must be String a 33OR resistor.
VCC: working power
GND: power ground
IN+: Input voltage
IN one: input ground
OCOUT: signal collector output port (use this output port when matching the driver)
FOUT: frequency output port (general frequency output port)
Two independent outputs, OC-OUT is NPN, FREQ-OUT is IC output. The common cathode is used with the negative GND of the power supply, and the common anode is used with the positive power supply. When the common anode is connected with 13-24v power supply, a 2.7KR resistor must be connected in series; when the common anode is connected with 12v power supply, it must be String a 33OR resistor.
Instructions:
Connect the positive and negative poles of the 0-10V voltage signal to IN+ and N- respectively, and there is a corresponding frequency signal output between FOUT and GND.
Correspondence between input and output:
1V = 1KHz
10V = 10KHz
If there is a deviation in the corresponding relationship during use, you can adjust the potentiometer on the board to calibrate.
Connect the positive and negative poles of the 0-10V voltage signal to IN+ and N- respectively, and there is a corresponding frequency signal output between FOUT and GND.
Correspondence between input and output:
1V = 1KHz
10V = 10KHz
If there is a deviation in the corresponding relationship during use, you can adjust the potentiometer on the board to calibrate.
Package list:
Module*1
Module*1
1)All items will be shipped to your eBay Address .Please make sure to provide us with correct,precise and detailed shipping address.
2) Economy shipping needs 2-5 weeks to arrive mostly.
In rare case, it can take up to 6-8 weeks.
It depends on your location and local postal service, as well as the weather condition along the shipping.
But the accurate time is depend on the customs .
If you not get it on time , please don't hesitate to contact us .
If you need a tracking number, you could choose Standard Shipping.
We accept PayPal only.
We only ship item to your PayPal verified address.
Please pay attention that import duties, taxes and charges are not included in the item price or shipping charges. These charges are the buyer's responsibility.
Please check with your country's customs office to determine what these additional costs will be prior to bidding/buying.
1.We believe our items are so outstanding. We are convinced you will be happy with your Purchase.
2. If you do not satisfy with our items. Please simply return to us within 30 Days in original condition. Just pay for the returned postage. Then we can issue full refund or resend the item to you after the returned item arrived at our warehouse.
3. Please include your eBay ID and item number with any email requests.
We will work hard to make sure every customer 100 percent satisfied, and reslove any problem for you. We sincerely hope that you can leave us a positive comment once you received the item,We also will leave a positive feedback immediately after payment is received. If for some reason there is any issue with the purchase, please contact us through "My Messages" or "Ask Seller Questions" before leaving neutral or negative feedback,we will be glad to work with you to have it resolved.
Our working time: Monday to Friday, 9:00~18:00
Thanks for your shopping
Am 13.01.2026 hat der Verkäufer die folgenden Angaben hinzugefügt: