Specification:
Easy to install, fully automatic operationPower Cable With 3 pin US Plug.Equipped with a ball valve filter, split with drain valve, an L-shaped structureVoltage: AC110V 50HzVoltage range: 10%Time interval ( OFF ): 0.5--45 minutes (adjustable)Discharge time ( ON ): 0.5--10 seconds (adjustable)Manual test button: Yes( microswitch )The current consumption: Max 4mAProtection grade: IP65Shell material: Flame retardant ABS plasticIndicator lamp: LED indicating power on / offType: two-way direct-acting valveFlow aperture: 5 mmIn / out port size: 1/2"Maximum working pressure: 1.6MpaMaximum temperature: 90 °CValve material: Forging brassInstallation:
1. Clean the compressed air system before installing
2. Attention to the direction of the arrow when the valve body; outlet do not use the impact of the hose does not impact
3. The supply voltage must be the same as the drain valve voltage; when using DC, the positive pole must be connected to the connector "1"
4. The factory has been connected to the cable drain valve, fade for the fire line L, blue for the zero line N, yellow and green color for the safe ground GND
5. Always tighten the long screws on the terminal box to prevent the water from burning
Timer Setting:
The left knob to set the discharge time, the right knob to set the interval time; the first discharge time of 2s, the interval time is 20min, and then need to be further adjusted
Package Contents:
1 * Drain Valve With Power Cable