56029398AB TPMS Sensors (Set of 4) – 100% Clone & Programmable | 433MHz Dual Band | Long Battery Life
Replaces Part Numbers:
56029398AA, 56029398AB, 56029398AD, 68241067AA, 68241067AB,, 53104671
Please verify your part number to ensure compatibility with your vehicle before purchase.
Key Features & Benefits
• 100% ID Clone Programming – Reads original sensor ID and writes it in; no vehicle programming required
• 433MHz Dual Frequency – Covers over 99% of car models
• Wireless & Unlimited Programming – Easy to program with tools like Autel TPMS
• 5-Year Long-Life Battery – Reliable and durable, no frequent replacement needed
• Interchangeable Valve Stems – Fits both rubber and metal valves for flexible installation
• OE-Quality Seal & Construction – Includes sensor, seal washer, nut, and cap to prevent leaks and corrosion
📦 Package Includes (Set of 4)
• TPMS Sensor × 4
• Seal/Washer × 4
• Lock Nut × 4
• Valve Cap × 4
🚗These sensors will fit the following vehicles / applications:
For Chrysler
• Aspen（2012-2015）
• 300（2011-2022）
• 300C（2009-2021）
• Town & Country（2011-2020）
• Grand Voyager（2011-2020）
• Viper（2012-2017）
For Dodge
• C/V（2013-2016）
• Challenger（2016-2021）
• Charger（2016-2022）
• Charger SRT（2015）
• Durango（2011-2016）
• Grand Caravan（2011-2022）
• Journey（2011-2020）
• Magnum（2010-2011）
• Ram 1500（2010-2013）
• Ram 2500（2010-2013）
• Ram 3500（2010-2013）
• RAM Cargo（2015）
• SRT Viper（2013-2015）
• Freemont（2011-2022）
For Jeep
• Compass（2012）
• Gladiator（2020）
• Grand Cherokee（2010-2016）
• Wrangler（2013-2019）
Optimized Installation Process:
✅ Deflate the Tire:
Remove the valve cap and core to fully deflate the tire.
✅ Dismount the Tire:
Secure the tire onto the tire changer and position the valve at the 1 o’clock position relative to the tire separation head. Use a tire tool to lift the bead over the mounting head and dismount the tire.
✅ Remove the Sensor:
Using a screwdriver, remove the fastening screw and sensor from the valve stem. Then loosen the nut and completely remove the valve.
✅ Install the Sensor and Valve:
Insert the valve stem through the valve hole on the rim. Secure the screw-nut with a torque of 4.0 Nm using a positioning pin for alignment. Attach the sensor body against the rim and tighten the mounting screw.
✅ Mount the Tire:
Position the tire onto the rim, ensuring the valve is oriented 180 degrees opposite the separation head. Carefully seat the tire bead over the rim edge.
Replaces Part Numbers:
56029398AA, 56029398AB, 56029398AD, 68241067AA, 68241067AB,, 53104671
Please verify your part number to ensure compatibility with your vehicle before purchase.
Key Features & Benefits
• 100% ID Clone Programming – Reads original sensor ID and writes it in; no vehicle programming required
• 433MHz Dual Frequency – Covers over 99% of car models
• Wireless & Unlimited Programming – Easy to program with tools like Autel TPMS
• 5-Year Long-Life Battery – Reliable and durable, no frequent replacement needed
• Interchangeable Valve Stems – Fits both rubber and metal valves for flexible installation
• OE-Quality Seal & Construction – Includes sensor, seal washer, nut, and cap to prevent leaks and corrosion
📦 Package Includes (Set of 4)
• TPMS Sensor × 4
• Seal/Washer × 4
• Lock Nut × 4
• Valve Cap × 4
🚗These sensors will fit the following vehicles / applications:
For Chrysler
• Aspen（2012-2015）
• 300（2011-2022）
• 300C（2009-2021）
• Town & Country（2011-2020）
• Grand Voyager（2011-2020）
• Viper（2012-2017）
For Dodge
• C/V（2013-2016）
• Challenger（2016-2021）
• Charger（2016-2022）
• Charger SRT（2015）
• Durango（2011-2016）
• Grand Caravan（2011-2022）
• Journey（2011-2020）
• Magnum（2010-2011）
• Ram 1500（2010-2013）
• Ram 2500（2010-2013）
• Ram 3500（2010-2013）
• RAM Cargo（2015）
• SRT Viper（2013-2015）
• Freemont（2011-2022）
For Jeep
• Compass（2012）
• Gladiator（2020）
• Grand Cherokee（2010-2016）
• Wrangler（2013-2019）
Optimized Installation Process:
✅ Deflate the Tire:
Remove the valve cap and core to fully deflate the tire.
✅ Dismount the Tire:
Secure the tire onto the tire changer and position the valve at the 1 o’clock position relative to the tire separation head. Use a tire tool to lift the bead over the mounting head and dismount the tire.
✅ Remove the Sensor:
Using a screwdriver, remove the fastening screw and sensor from the valve stem. Then loosen the nut and completely remove the valve.
✅ Install the Sensor and Valve:
Insert the valve stem through the valve hole on the rim. Secure the screw-nut with a torque of 4.0 Nm using a positioning pin for alignment. Attach the sensor body against the rim and tighten the mounting screw.
✅ Mount the Tire:
Position the tire onto the rim, ensuring the valve is oriented 180 degrees opposite the separation head. Carefully seat the tire bead over the rim edge.
On Jan 13, 2026 at 21:59:03 PST, seller added the following information: