4800W 100A MPPT Solar Charge Controller 12V/24V/36V/48V Battery PV Regulator NEW
Features:
1. Superior MPPT Technology: This 100A MPPT solar controller is equipped with an advanced MPPT maximum power point tracking technology algorithm. It automatically recognizes 12V/24V/36V/48V systems and features dual USB 5V charging ports. The controller can swiftly track the maximum power point of the PV array in any environment, ensuring a tracking efficiency of no less than 99.5%. This significantly enhances the energy utilization in the solar system.
 
2. LCD Backlight: The controller features a multi-function LCD with a backlight display and clock. The upgraded version now supports precise time control, allowing devices to be automatically powered on and off according to the user’s set time. Additionally, it can maintain a continuous bright screen state without entering hibernation or lock mode.
 
3. User-Centric Design: The LCD is designed to dynamically display the operational data and working status of the equipment. It shows controller parameters such as working mode, battery voltage, PV charging current, battery discharging current, product working temperature, and delay time. 
 
4. 7 kinds of working mode selection: It offers seven operating modes: charging mode, light control mode, light control + time delay control mode, universal control mode, manual control mode, timing control mode and test mode.
 
5.Reset to factory settings: For scenarios requiring configuration resets or restoring default settings, a "reset to factory settings" feature has been added, providing a quick and effective solution.
 
6. Diverse Battery Charging Options: The controller is compatible with various types of batteries, including Seal, GEL, Flooded, and LifePO4.
 
7. Comprehensive Voltage Protection: The MPPT solar controller provides extensive voltage protection, including safeguards against battery over-voltage, over-current, power failure, overcharge, deep discharge, reverse connection, and overheating. Moreover, the device can now display the real-time voltage of the solar panel, helping users monitor and optimize energy use, ensure normal operation, and assist in troubleshooting.
 
Specifications:
 
Type: MPPT Solar Charge Controller
 
Material: Plastic + Aluminum Alloy
 
Product Size: 19.5*18.6*6.5cm / 7.68*7.32*2.56 inches
 
Battery Voltage: 12V/24V/36V/48V Automatic
 
Charging Current: 100A
 
Maximum Solar Input (Voc): 15-25V (12V Battery); 30-50V (24V Battery); 45-75V (36V Battery); 60-100V (48V Battery)
 
Maximum input power of photovoltaic panels: 1000W (12V), 2000W (24V), 3000W (36V), 4000W (48V)
 
Maximum PV Input power:
(100A)1200W (12V battery); 2400W (24V battery); 3600W (36V battery); 4800W (48V battery)
 
Support Battery: Gel battery, Lead-acid battery, LifePO4, Flooded, Seal
 
7 kinds of working mode selection:
 
1.  Charging mode: in any case, never discharge.
 
2.  Light control mode: when the controller detects nights, it will delay ten minutes then start to discharge;   when it detects daytime, it will delay ten minutes then stop discharging.
 
3.  Light and time delay control mode: when the controller detects nights, it will delay ten minutes then start to discharge and count down, if the timer stops by zero, discharge will stop.   The longest duration of delay is 23:59.
 
4.  Universal control mode: under the trouble-free condition, it always keep discharging.
 
5.  Manual control mode: it uses “▼” for discharging or not.
 
6.  Timing control mode: it opens or closes the discharge regularly.
 
7.  Test mode: it is the same as light and time delay control mode but only loses ten minutes of time delay.
 
8.  The controller still discharges under low voltage protection.   Touch-holding “▼” for 5 seconds, discharge continues to output.   But discharge is only stopped by hand.   Notice that this performance may damage the battery, be careful with it!
 
Note:
1.Please connect the battery to the controller first, and then the photovoltaic panel to ensure that the battery voltage is higher than (12V battery is higher than 10V; 24V battery is higher than 20V; 36V battery is higher than 30V; 48V battery is higher than 40V), otherwise it will cause voltage Identification error.
 
Package Included:
1 * MPPT Solar Controller
1 * User Manual
 
1.Paypal, Credit Card, G Pay etc, many payment way is accepted.

2.Please be sure your shipping address is correct before make a payment.
 
1.We are shipping from multiple warehouses (Houston, Texas/ Corona, California), please note before placing an order
2.We will ship out the item within 1-3 business days after comfirming the payment, appreciate your patience.

3.If the items are broken on the way(we will check the orders clearly before we sent them),please contact us in 3 days you received it. We will send you a new one or refund your payment.
1.We stand behind every buyer.Items can be returned for exchange or refund within 30 days.

2.Please contact us when you have any confusion of our item, we will solve the trouble for you as soon as possible.
1.This is professional Seller.We will reply your message within 24 hours.
2.Please contact us whenever you have any question about the item. We will deal with it as soon as possible.
3. If you are unhappy with the item or our service,please Contact Us before leave feedback,just give me a chance,thank you!
 
1. Unless specified otherwise, all our products are IN STOCK and are shipped from Local warehouse - Not Overseas!

2. We provide a 30 day Satisfaction Guarantee or your money back (provided items are in the same new and resaleable condition.)

3. We have a PayPal Verified Business Account, please buy with Confidence!

4. Every item will be tesrted before send.We know our products well and if we don't have the answers we will do our best to find them for you!

5. Our friendly team look forward to serving you! Your satisfaction is our No.1 Priority We will do our best to satisfacy you.