Supports up to 7 x 120mm fans and a 360mm radiator in top. Adjust the airflow inside the chassis
The mesh panels provide good heat dissipation and maintain a lower temperature in the face of high-power hardware
Supports up to 13 hard disks (10x 3.5“ HDD + 3x 2.5” SDD) to reduce storage space shortage
The graphics card can be mounted vertically through 3 vertical slots, where the front and rear fans form parallel air ducts for better heat dissipation
Pre-installed fans and hub for excellent heat dissipation
(Note: Chassis does not include hard disks, need to buy separately)
E-ATX/ ATX/ M-ATX/ ITX motherboard supported (hard drive cages need to be removed to install E-ATX )
Supports up to 400mm in length if the hard drive cage is removed, otherwise, it supports only 295mm
USB 3.0 provides 5 Gbps transfer speed for more efficient data transfer. Top and bottom with removable magnetic air filters to keep dust out
18.3 x 9.06 x 18.78 | Dimensions (inch) | 18.9 x 8.07 x 18.5 |
E-ATX/ATX/M-ATX/ITX | Motherboard Support | ATX/M-ATX/ITX |
400mm | Max. GPU Length | 400mm |
180mm | Max. Cooling Height | 160mm |
10 x HDD+ 3 x SDD | Hard Disk Support | 10 x HDD+ 3 x SDD |
2 | USB 3.0 | 1 |
Type-C Support |
18.3 x 9.06 x 18.78 | Dimensions (inch) | 15.1 x 8.6 x 17.6 |
E-ATX/ATX/M-ATX/ITX | Motherboard Support | ATX/M-ATX/ITX |
400mm | Max. GPU Length | 340mm |
180mm | Max. Cooling Height | 165mm |
10 x HDD+ 3 x SDD | Hard Disk Support | 2 x HDD+ 2 x SDD |
2 | USB 3.0 | 1 |
Type-C Support |
18.3 x 9.06 x 18.78 | Dimensions (inch) | 19.29 x 9.05 x 18.62 |
E-ATX/ATX/M-ATX/ITX | Motherboard Support | E-ATX/ATX/M-ATX/ITX |
400mm | Max. GPU Length | 360mm |
180mm | Max. Cooling Height | 180mm |
10 x HDD+ 3 x SDD | Hard Disk Support | 2 x HDD + 5 x HDD |
2 | USB 3.0 | 2 |
Type-C Support |