DC 12V High Frequency AC High Voltage Generator Inverter Boost Arc Ignition Coil
Product View
Detail
Product features:
1. This driver board adopts H-bridge 4-transistor MOS variable frequency resonant topology technology, with high driving efficiency and high power;
2. Low heat generation without the need for a radiator;
3. The arc striking distance is 1cm~2cm, which allows for direct arc striking without the need for arc pulling;
4. The orange yellow flame arc can melt copper wire at a temperature of around 1200 degrees, with a wide range of applications;
5. The arc temperature is high, which can directly melt fine copper wires, iron wires, sparks, and ignite various gases, alcohol, gasoline, diesel, plastic, paper, etc.
Specification parameters:
Power supply voltage range: 7-15V
Suggested power supply voltage: 12V
Full load power: 50W
Input current:<2A
Output voltage: 15KV~20KV
Output current: 5mA~15mA
Circuit board size: 2 * 4.3cm
Overall size: 2 * 6cm
Overall height: 2.5cm
Instructions for use:
Arc striking distance of 1cm~2cm (direct arc striking, no need to pull the arc. If the arc has already started but is not obvious and cannot be ignited, the electrode distance can be brought closer)
When the continuous working time exceeds 5 minutes at 9V or above, a fan needs to be installed next to the transformer,
This product has no casing (the transformer part has been sealed), please pay attention to safety during operation.
Note:
1. This model outputs high-frequency AC, so the lead cannot be too long. The transformer can be removed and connected to the primary end for extension, or directly extended at the power supply end
2. The power supply must be provided within the rated voltage range to function properly! If the voltage is too low, the module will be under voltage and stop working. Do not reverse or overpressure, as it may damage the module and even cause the capacitor to explode!
3. This product poses a certain risk to non professional personnel and must be operated strictly in accordance with electrical specifications!
Product List:
1X high-voltage module
Copyright © 2017 DataDaciques
Product View
Detail
Product features:
1. This driver board adopts H-bridge 4-transistor MOS variable frequency resonant topology technology, with high driving efficiency and high power;
2. Low heat generation without the need for a radiator;
3. The arc striking distance is 1cm~2cm, which allows for direct arc striking without the need for arc pulling;
4. The orange yellow flame arc can melt copper wire at a temperature of around 1200 degrees, with a wide range of applications;
5. The arc temperature is high, which can directly melt fine copper wires, iron wires, sparks, and ignite various gases, alcohol, gasoline, diesel, plastic, paper, etc.
Specification parameters:
Power supply voltage range: 7-15V
Suggested power supply voltage: 12V
Full load power: 50W
Input current:<2A
Output voltage: 15KV~20KV
Output current: 5mA~15mA
Circuit board size: 2 * 4.3cm
Overall size: 2 * 6cm
Overall height: 2.5cm
Instructions for use:
Arc striking distance of 1cm~2cm (direct arc striking, no need to pull the arc. If the arc has already started but is not obvious and cannot be ignited, the electrode distance can be brought closer)
When the continuous working time exceeds 5 minutes at 9V or above, a fan needs to be installed next to the transformer,
This product has no casing (the transformer part has been sealed), please pay attention to safety during operation.
Note:
1. This model outputs high-frequency AC, so the lead cannot be too long. The transformer can be removed and connected to the primary end for extension, or directly extended at the power supply end
2. The power supply must be provided within the rated voltage range to function properly! If the voltage is too low, the module will be under voltage and stop working. Do not reverse or overpressure, as it may damage the module and even cause the capacitor to explode!
3. This product poses a certain risk to non professional personnel and must be operated strictly in accordance with electrical specifications!
Product List:
1X high-voltage module
1)All items will be shipped to your eBay Address .Please make sure to provide us with correct,precise and detailed shipping address.
2) Economy shipping needs 2-5 weeks to arrive mostly.
In rare case, it can take up to 6-8 weeks.
It depends on your location and local postal service, as well as the weather condition along the shipping.
But the accurate time is depend on the customs .
If you not get it on time , please don't hesitate to contact us .
If you need a tracking number, you could choose Standard Shipping.
We accept PayPal only.
We only ship item to your PayPal verified address.
Please pay attention that import duties, taxes and charges are not included in the item price or shipping charges. These charges are the buyer's responsibility.
Please check with your country's customs office to determine what these additional costs will be prior to bidding/buying.
1.We believe our items are so outstanding. We are convinced you will be happy with your Purchase.
2. If you do not satisfy with our items. Please simply return to us within 30 Days in original condition. Just pay for the returned postage. Then we can issue full refund or resend the item to you after the returned item arrived at our warehouse.
3. Please include your eBay ID and item number with any email requests.
We will work hard to make sure every customer 100 percent satisfied, and reslove any problem for you. We sincerely hope that you can leave us a positive comment once you received the item,We also will leave a positive feedback immediately after payment is received. If for some reason there is any issue with the purchase, please contact us through "My Messages" or "Ask Seller Questions" before leaving neutral or negative feedback,we will be glad to work with you to have it resolved.
Our working time: Monday to Friday, 9:00~18:00
Thanks for your shopping
Am 13.01.2026 hat der Verkäufer die folgenden Angaben hinzugefügt: