Condition: BRAND NEW IN ORIGINAL PACKAGING

Warranty: 1 YEAR MANUFACTURER

Features:

• 8" 800W Amplified Subwoofer System with Enclosure. (Sold Single)
  
• One 8" Woofer with SINGLE 2.6 ohm Voice Coil
  
• 800 Watts MAX 400 Watts RMS Power Handling
  
• RCA & Speaker Level Inputs, High Level Inputs
  
• Thermal, Short and Overload Protection Circuits, Power & Protection LEDs
  
• Phase Control, Low Pass Crossover, Variable Bass Boost, Input Gain Control
  
• S/N Ratio> 90 dB, Frequency Response 30Hz to 150Hz
  
• Remote Subwoofer Control
  

Key Features:

• High and Low Level Inputs
  
  • An amplifier with both high-level and low-level inputs provides flexibility by allowing you to build an audio system using virtually any standard factory or aftermarket source unit. High-level (speaker level) inputs accept the signal from the speakers, while low-level (RCA) inputs accept the signal from the pre-amp outputs of the source unit.
    
• MOSFET
  
  • MOSFET stands for Metal Oxide Semiconductor Field-Effect Transistor. MOSFETs are used either as a switch or to amplify a signal. MOSFETs are superior to other FETs, because they require less current to operate, which makes them better suited for car audio.
    
• Phase Control
  
  • The phase control feature allows you to adjust the speakers phase to ensure all audio signals are playing together rather than against each other. When bass notes are noticeably absent, a quick and easy adjustment to the phase control could provide the perfect remedy.
    
• Protection
  
  • If the amplifier gets too hot, the thermal protection circuit turns the amp off and allows the amp to cool down before turning it back on. If a speaker fails causing an electrical short, the protection circuit will automatically cut the output and remain in that state until the short is resolved. These safety features give you peace of mind knowing the amplifier is constantly monitoring conditions to protect itself.
    
• Single Voice Coil
  
  • A subwoofer with a single voice coil can be powered by an appropriately matched amplifier or can be combined with multiple single voice coil subwoofers to achieve a variety of impedances to match your amp set up. Single voice coil subwoofers are generally ideal for low to medium-power applications.
    
• Subwoofer Level Control
  
  • The ability to boost or attenuate the sub level when an amp and subwoofer are connected to the subwoofer pre-amp output.
    
• Variable Bass Boost
  
  • Variable Bass Boost allows you to adjust the low bass within the boost range to just the way you like it.
    
• Variable Gain Control
  
  • Variable Gain Control lets you balance the amps output with the speakers or subs the amp is driving. To much gain will lead to distortion and to little will lead to clipping.
    
• Variable Low Pass Filter
  
  • Variable low-pass filter gives you control over the frequencies that pass through to the subwoofer.
    

Specifications:

• Subwoofer Size: 8"
  
• RMS Power Handling: 400 Watts
  
• Impedance: 2.6 Ω
  
• Peak Power Handling: 800 Watts
  
• Voice Coil Configuration: SINGLE
  

System Features:

• Subwoofer Level Control: Yes

Wiring kit included:

• 17 ft. 8 Gauge Red Power Cable
  
• Competition High-Quality 40 Amp Fuse Holder
  
• 3 ft. 8 Gauge Black Ground Cable
  
• 16 ft. 18 Gauge Blue Remote Cable
  
• 16 ft. High Performance RCA Interconnect
  
• (7) 4" Wire Ties
  
• (1) Plastic Grommet
  
• (1) #10 Gold-Plated Ring Terminal
  
• (1) Butt Splice Wire Connector
  
• (1) Tap Screw
  
• (1) Large Black Rubber Terminal Boot

AudioSavings Return Policy:

At Audiosavings, we strongly believe in customer satisfaction and therefore offer free return shipping within 30 days of purchase on all items returned to us within the continental USA.

Prior to returning merchandise, contact us and we will give you a return authorization # and a return label.

You may return this item for a refund within 30 DAYS of purchase.

Warranty Repair/Exchange Period: 1 YEAR

If your item is defective or you want to return it for any reason within the first 30 days of when it was delivered to you; you have the following options:

• We will send you a pre-paid shipping label to replace the item for a brand new one.
• We will send you a pre-paid shipping label to exchange the item for another item of your choice. If the item you chose is more or less money we will work out the price difference with you.
• If you are returning a working item in used condition for a refund there will be a 20% used item fee deducted from your refund. All replacements and exchanges are free.

Replacement/Processing Time:

Your replacement or refund will process within 3-5 business days of when we receive the item.

Please note items with physical damage un-related to shipping are not covered under warranty. Registered software cannot be returned.

You MUST notify us within 48 hours if you receive an item that was damaged during shipping.

Process for returning items

Please email us with your eBay user ID, Item code / model #, Condition of the item, and the reason for your return. Please also indicate whether you would like a replacement, an exchange, or a refund. We will supply you with a reference number (RMA #) to put on the package which will ensure quick processing of your return. All returns require a RMA# to be returned back to our facility.