Product Description:
• This listing is for 1 piece self-adhesive protection vinyl film sheet in dull polish for varieties of places such as tail lights, fog lights, side marker lights, bumpers, hood or even windshield.
• Easy removal with no residual, no damage your lamp.
• This listing is for 1 piece self-adhesive protection vinyl film sheet in dull polish for varieties of places such as tail lights, fog lights, side marker lights, bumpers, hood or even windshield.
• Easy removal with no residual, no damage your lamp.
• There might be chromatism between the real item and the picture because of the light and display screen.
Specifications:
High Quality Matte Black Vinyl Flim
Strong self-adhesive sticker can be applied to virtually any surface.
High temperature resistant (-30 to +150c) UV protected.
Durability: indoor 8-10 years outdoor 5-7 years
Easy Removed Without leaving glue behind
Stretchable with heat from hairdryer or heat gun
Material: Vinyl
Size: Approx. 200*30cm / 79*11.8in
Thickness 0.20mm
Color: Matte black
Package Includes:
200cm * 30cm Film Sticker
Instructions:
Spray or wipe your lights with some water to remove any residue.
carefully apply the vinyl/film
use a bit heat to enhance the glue effect.
finally trim the edge the rim
if need apply further heating to make sure the film is firmly stacked
Tips：
When you received our product, if you notice the sticker is curled and wrinkled, please be careful, the sticker can be recovery as the below step:
1. Clean paste position.
2. Move away the bottom paper on the back.
3. Adjust the position and paste.
4. Use a hair dryer to heat the wrinkled and curled place of the car sticker, then use the scraper to flatten the sticker and remove air bubbles.
5. Move away the transfer film carefully.
6. Finish. Don't wash your car in 3 days.
If the product is not suitable or there is a quality problem, please contact our customer service directly to solve the problem. We will give you a satisfactory solution.
Specifications:
High Quality Matte Black Vinyl Flim
Strong self-adhesive sticker can be applied to virtually any surface.
High temperature resistant (-30 to +150c) UV protected.
Durability: indoor 8-10 years outdoor 5-7 years
Easy Removed Without leaving glue behind
Stretchable with heat from hairdryer or heat gun
Material: Vinyl
Size: Approx. 200*30cm / 79*11.8in
Thickness 0.20mm
Color: Matte black
Package Includes:
200cm * 30cm Film Sticker
Instructions:
Spray or wipe your lights with some water to remove any residue.
carefully apply the vinyl/film
use a bit heat to enhance the glue effect.
finally trim the edge the rim
if need apply further heating to make sure the film is firmly stacked
Tips：
When you received our product, if you notice the sticker is curled and wrinkled, please be careful, the sticker can be recovery as the below step:
1. Clean paste position.
2. Move away the bottom paper on the back.
3. Adjust the position and paste.
4. Use a hair dryer to heat the wrinkled and curled place of the car sticker, then use the scraper to flatten the sticker and remove air bubbles.
5. Move away the transfer film carefully.
6. Finish. Don't wash your car in 3 days.
If the product is not suitable or there is a quality problem, please contact our customer service directly to solve the problem. We will give you a satisfactory solution.