GS Tackle Low Profile PVA Dropper for Boatman Vulcan V1 & V2 Manufactured here in the UK by ourselves to our design, simple PVA dropper designed to keep your PVA bags off the standard hopper door flaps and away from the water to keep them dry whilst being driven out in the boat.

Unfortunately, the standard Vulcan hopper doors can let a small amount of water pass through them during driving, this can melt your bag on the way to your spot and stop you delivering your PVA bag as intended, we’ve designed this Low profile PVA dropper to be an effective way of keeping your bags dry from the underneath by lifting them approx 15mm up without having to load the hoppers with pellets or additional bait.

Can be used with a GS Tackle Hopper cover to provide cover from the rain.

The PVA Dropper consists of the following parts :

Main body, this is just drop into the hull and has been perfectly matched to the Hull design of the Vulcan - and as you would expect fit’s like a glove.
It also incorporates a cut-out to allow the use of the GS Tackle Drop in Rear Deeper at the same time.
The body is split in half at the rear, to still allow the great top-loading feature of the Vulcan, however is still robust enough for continued use for years to come.

Bombay Doors / Flaps, these have been specially designed to have a perfect rounded contact point with the original hopper doors, this minimises friction and allows the flaps to be shut as the original doors are shut - so no messing around holding the flaps out the way or having to remove the system and reset every time.

Pivoting Bushes / Screws, we utilised the same technology from the Vulcan Rear mount to ensure screws could be fully tightened without “pinching” the body together - this give a nice resistance free loose design without the fear of it coming unattached. To do this we utilise plastic bushes with plastic welded inserts into the flaps.

Instructions to use :-

Open the hopper doors, insert the PVA dropper.
Close the hopper doors
Load your PVA bag onto the dropper
Close the rear latch of the boat

When putting out the second / third rod, please ensure to dry any water from the flaps before placing a bag on it !

Manufactured from the highest quality 3D printed PETG filament - will not fade or distort in sunlight
Will be supplied already fully assembled ready to use.

Main body will be black, with contrasting logo colour - optional coloured flaps (made from outdoor grade PETG) please see the colour chart picture and make your selection when ordering.

Free PVA Scoop / spoon will come with the PVA dropper, random colours supplied however if specific colour required please message us your requirements after placing your order.

Compatible with both mk1 & mk2 Vulcans

PLEASE NOTE : NOT Compatible with the Vulcan MINI. Bait boat / Deeper NOT INCLUDED !

These are manufactured by ourself and made to order hence the 10 day lead time, we will often beat this but occasionally we will be out fishing and testing new products and may need the full 10 days.
If you need the item in a rush, please drop us a message (prior to buying) with your required delivered date and we will reply quickly to confirm if we can get it to you in time.