Silent Oil-Free Air Compressor
Silent Oil-Free Air Compressor for Dental Use
Product Overview
This oil-free air compressor is designed for dental applications, delivering clean, quiet, and reliable performance. Its advanced features include anti-rust and anti-microbial interior tank coating, ultra-low noise operation, and durable continuous-run capability.
Key Features
Clean Air Assurance:
Oil-free operation with anti-rust and anti-microbial interior tank coating.
Low Noise Design:
Optional silent cabinet reduces noise to just 50dB+(A).
Long Service Life:
Engineered for continuous operation with stable airflow output.
Model: GA02 40L, 800W
Specification Value
Voltage 120V
Motor Power 800W
Rated Pressure 8 bar
Max. Air Flow 155 L/min
Tank Capacity 40 L
Noise Level 58 dB
Gross Weight 32 kg
Packing Size 440×440×685 mm
Components List
1.Host Unit
2.Air Tank
3.Emergency Stop Switch (Red Mushroom)
4.Motor Start Switch Equipment Control Box
5.Solenoid Valve
6.Pressure Gauge
7.Safety Valve
8.Compressed Air Output Valve
9.Wastewater & Exhaust Discharge Valve
Operation & Maintenance Guidelines
The air compressor automatically stops filling when the air pressure in the tank reaches 0.8 MPa, During product use, when the pressure drops to 0.5MPa, the machine will automatically restart and continue operating until the pressure returns to 0.8 MPa. This cycle repeats automatically.
�� Emergency Stop Button
Press the red button to immediately stop the machine in emergencies.
Pull the button upward to reset after resolving the issue.
��️ Air Filter Maintenance
Clean the filter regularly to prevent dust entry and maintain suction efficiency.
Rinse the sound-damping sponge every 30-60 days.
�� Tank Drainage
Drain accumulated water every 3-5 days to maintain tank integrity.
⏱️ Inflation Time Test
Recommended frequency: Monthly
Procedure:
1.Turn off power.
2.Open drain and air outlet valves.
3.Close both valves.
4.Restart the machine and record the time to reach shutoff pressure.
Note:
Normal inflation time: 3–4 minutes.
If exceeding 5 minutes, contact after-sales service.
Handpiece Lubrication System
Lubricator
Dental Automatic Handpiece Maintenance Lubrication System Cleaner Oiling Machine
Features:
Economical, efficient and time-saving.
It is able to ensure the cleaning and refueling of dental handpieces.
Three handpieces（two high speed and one speed）can be maintained simultaneously.
Various brands of high-speed(4 holes) and low-speed handpieces are applicable.
Rotating gear can efficiently oil and clean handpieces from different angles.
The digital regulation time function can control the oiling time accurately.
The air button with special design can remove the redundant oil after oiling and cleaning.
Using sealed sliding door to minimize the diffusion of oil mist, Keep working conditions clean.
Smart working mode avoid setting the oiling time every time.
Parameters:
Voltage Rating: AC110V
Air Pressure: 4kg/cm² - 8kg/cm²
Rated power: 40W
Can Volume: 300ml
Working temperature: 5℃ - 40℃
Size:300×230×360mm
Packing list:
1×Main unit
1×Blow-off pipe
1×Product manual
ATTENTION:
This machine must be used with air supply( Air compressor )
Dental high and low speed handpiece air scaler kit
Specification:
High speed handpiece
Chuck Type：Push button
3 port spray
Ceramic bearing
Head Size:Ø12.3 *H13.5 mm
Bur applicable:Ø 1.59mm-Ø1.6mm
LED handpiece integrate E-generator
Air Pressure：0.25-0.3 Mpa
Water pressure：0.25-0.3 Mpa
Rotor Speed：280,000-350,000R.P.M
Noise:≤70dB
4 holes or 2 holes optional
135°C Autoclavable
Low speed handpiece kit
External water spray
Gear ratio：1:1 direct drive
Chuck Type：Latch contra angle
Air pressure:0.25-0.3MPA
Bur applicable:ø2.35mm
Rotation speed:20,000 rpm
Noise:≤70dB
ISO E-TYPE Connect
135°C Autoclavable
4 /2Hole Air motor
Air scaler handpiece
Air Pressure：0.28-0.35MPa
Working Frequency: 6200-6450Hz
135°C Autoclavable
Tips model:G1,G2,G4
Packing List:
High speed handpiece*1
Contra angle*1
Straight handpiece*1
Air motor*1
Air scaler handpiece*1
Other accessories
