Attention:
Using Time: approx 1 minute (will automatically power off in order to protect the machine, can be used again after cooling)
With CE/220V UK Plug/English Manual/LED Light
Please make sure that the coil has been fully inserted into the interface of the machine before turning on the machine. If the coil is not installed properly, the machine may overheat and cause a short circuit.
Feature:
1.An induction heater is a key piece of equipment used in all forms of induction heating.
2.The inductor is a hand-held one with slip-resist ergonomic housing. Faster and safer than traditional torch.
3. Collateral damage normally associated with torches can also be eliminated.
4.A bright LED light exists to light up your work load.
Specification:
Voltage: 220V AC 60Hz
Wattage: 1100W
Plug: UK
Operating Temperature: -40 ° C ~ 60 ° C
Relative Humidity: <95% RH
Atmospheric Pressure: 86KPa~10KPa
Illumination: LED Light
Model Number:kIA-1KW
Certificate:CE(EMC,LVD),UL,CCC,Available for COC,POVC
Induction Coil:Diameter*Quantity:Φ30mm*2(PCS),Φ40mm*2(PCS),Φ50mm*2(PCS),Spare Wire*2(PCS)
Heating Bolt Diameter:Φ5-40mm
Heater Dimension:36CM*6.8Cm*6.8CM
Applications:
1. Preheat become attached or rusted fasteners and parts that need to be separate
2. Straighten small hail and other similar dents without painting paint layer without breaking the car, Removal of Strip on auto body parts when you restore or straightening.
3. Burning silent blocks, pressed on beams running gear or other machinery and equipment.
4. Heat treatment of metal parts, hardening, tempering, normalizing.
5. Pressing bearings on a hot landing, as well as flowability.
6. Snyatie small laminated glass sealants for metal.
7. Removing glued on painted metal spoilers, moldings, stickers.
8. The heating of the surface of the hood or other surfaces to be coated vinyl.
9. Removing rust from metal and car body by high-speed heating parts, and flaking rust.
10. Removing paint coating to a metal surface or body cars.
Safety Rules：
1.Read manual carefully before using.
2.Keep your work area clean.
3.Do not overreach, keep proper footing and balance at all times, proper footing and balance enables better control.
4.Do not use in moist surroundings or immerse it in water to electrical shock hazard and machine damage.
The advantage of using this device is it is totally flameless,comparing with traditional way lf heating by
fire,it is much safer and of higher work efficiency,without the worry of harming the adjacent area,Light weight
do not deed water cooling,and very easy to use
This device adopt Electro-Magnetic induction theory,can fast heat small metal parts on auto or machines,
Mainly used for heating Rusted/Frozen/Corrosive Bolt,Nut,Fasteners,Suspension Nut,Gears,Pulley,and Bearings
etc,Meanwhile,it also can help removing stickers on cars.
Heating Abilities:In around 30 seconds,it can heat a 20mm dimeter bolt to a temperature above 300℃,
maximum temperature can reach around 750℃
Package
1 x Magnetic Induction Heater
6 x Coils
2 x spare lines(can change shape)
1 x Manual
1 x Tool Box