- ⚡【 Voltage tester two-pole】 BTMETER AC DC voltage tester can be used AC and DC voltage (including three-phase AC current measurement), three-phase AC power display phase, on/off test, continuity, RCD test, continuity test, phase rotation test, polarity detection and self-inspection.
- ⚡【 Measuring range】 BTMETER BT-38A voltage tester can measure 12-690V AC/DC voltage, accuracy (23±5C): (3%+3) or 5V, range/resolution: 7-690V/1V (auto range)
- ⚡【 Safety phase tester】 BTMETER 38A voltage tester features a low battery voltage indicator and a voltage display over the measured range, saves energy and is safe to use. Meets the safety requirements for double insulation, CAT III 690V, CAT IV 600V and CE
- ⚡【 Easy to use】 Digital LCD display with backlight for easy reading. Non-contact auto-range voltage tester portable to use.
- ⚡【 Overload protection and Wide Application】
- Phase tester pen type digital multimeter has double insulation protection that strengthens the insulation protection equipment. Compact high-precision electrical test device.
- And is suitable for household and industrial purposes, such as sockets, fuses, batteries, automotive circuits, testing electronic equipment, scientific projects, learning electronic equipment, electrical maintenance, etc.
- ⚡ 【User-drawn support by the customer service team】If you have any questions, please contact our customer service. We will reply to you within 24 hours.
Pen light✔
Low Battery Indication✔
Auto Hold✔
Continuity Test✔
- Phase Rotation Test✔
Auto Power Off✔
Material: ABS
✅ LED Display Voltage Test:
Voltage Range: 12-690V AC/DC
Rated Voltage Europe: 12/24/50/120/230/400/690V
Tolerance (threshold voltage) Light on at more than: 7 ± 5 V (50 V LED), 18 ± 5 V (24 V LED), 37.5 ± 5 V (50 V LED), 75% ± 5% of rated voltage (120/230/400/ 690V LED)
✅ LCD Display Voltage Test:
Range/Resolution: 7-690V/1V (Auto-Range)
Accuracy (23±5C): (3%+3) or 5V
Out-of-range indicator: All voltage LEDs light up
Response time: <1s at 90% of each voltage
✅ High Voltage Display:
Voltage range 50-690 V AC/DC
✅Phase rotation test:
System: Three-phase 4-wire system AC
Frequency: 50Hz~60Hz
Phase range: 120 ± 5 degrees
✅ Continuity test:
Detection Range: 0-550KΩ(±2O0K)
Test Current: Approx. 1.5uA (3V 0Q battery)
✅Reference condition:
Battery: 2 * 1 5V (IEC LR03 1 5Vx2)
Temperature: -10~55°C Operating, -20~6O°C (Storage No Condensation)
Humidity: Max. 85% RH
Altitude: up to 2000m
Operating Temperature: -10~55°C / 14~131°F
Operating Humidity: ≤85%RH
Storage Temperature: -20~60°C / -4~140°F
Storage Humidity: ≤85%RH
Power supply: IEC LR03 1.5V*2 (not included)
Item Size: Approx. 25 * 5.5 * 2cm / 9.84 * 2.17 * 0.79in
Rubber protective cap
It is made of a high-quality silicone handle, is easy to carry and feels smooth, which can effectively prevent the multimeter from being damaged by falls from a great height.
LED light and LCD backlight
The backlit LCD display and torch lighting ensure clear readings and visibility in dimly lit areas, reducing safety risks
Electricity meter measurement
As a portable pen multimeter, the GR-38A can solve most troubleshooting problems at home, allowing you to work like a professional.
Batterie nicht im Lieferumfang enthalten
Precautions:
1. Never take measurements on a circuit where the electrical potential exceeds 690 V. (If the measured voltage exceeds 690V, all voltage LED indicators will light up.)
2. Do not attempt to take measurements in the presence of flammable gases, as the use of the.
3. Never try to use the instrument when the surface of your hands is wet. (Do not use in case of rain.)
4. Keep your hands and fingers behind the barriers during the measurements.
5 .Never unlock or open the battery compartment while measuring.
6 .Verify proper operation from a known source before taking action based on the display.
7. Never attempt to take measurements under abnormal conditions, such as a broken housing or exposed metal parts on the instrument or probes.
8. Do not make any changes to the instrument.
9. Be extremely careful when the circuit LED flashes or lights up.
10. The correct display of the LEDs is only guaranteed within a temperature range of -10°C to 55°C (<85% RH). The instrument can cause sparks that could lead to an explosion.
Package:
1 * BT-38A Pen Type Digital Multimeter
1 * User Manual (English)
