ECU Programming Car OBD2 Scanner with Topology Mapping
Upgrade of D9S PRO, 51+ Resets with Key Programming
Automotive Bidirectional Scan Tool with 3-Year Updates
Added FCA AutoAuth Function--Newest
XTOOL INPLUS IP919PRO Automotive Diagnostic Scanner supports access to the Security Gateway Module on 2018 and For Fiat/Chrysler/Dodge/Alfa Romeo/Renault vehicles so that diagnostic tools can clear codes, run bi-directional active tests, drive, relearn and even IMMO passwords Key programming (PIN extraction and writing), ECU encoding, initialization, ADAS calibration assistance, etc. (No Need FCA 12+8 Cable). Note: The user is required to register an FCA account, any charges have nothing to do with the seller.
XTOOL IP919PRO New Add Pre Scan & Post Scan Function
The PRE SCAN and POST SCAN functions generally refer to diagnostic operations before and after vehicle repairs. An important step in ensuring automotive repair diagnostic integrity, repair quality and customer satisfaction. Greatly adds to the credibility of the shop and its technicians that also goes a long way to justify the diagnostic charge. V2.0 Report: Report 2.0 allows you to customize shop and vehicle information, Try to add the customer's vehicle problem in the form of a picture to the report, and don't forget to put your shop logo in a prominent position in the report!!
Wireless Wifi Diagnostics Powerful than Bluetooth Diagnostics
Compared to Bluetooth and Cable Connection Diagnostics, WIFI Connection Diagnostics has a faster transmission speed and a Longer Communication Distance, more free and not limited by the length of diagnostic cable, make work is more efficient, convenient and stable.
Advanced ECU Programming & Coding & PMI
INPLUS IP919PRO Provides Best Solutions for BMW/Benz/VW/Audi/SKODA/Ford/Mazda for ECU Programming, to replace the existing software/firmware in the electronic control unit, program new ECUs, and fix software-controlled driving performance and emission issues. Personalized Settings, or disable the annoying functions, such as turn off the back up beep, turn the seat belt buzzer off.
OE-Level Full Diagnostic & Guided Function (For VAG)
XTOOL INPLUS IP919PRO scanner can scan all available vehicle systems like Engine, Trans, ABS, Airbag, Brake, Body, Chassis, HVAC, Radio and etc to perform dealer-level diagnostics: Read/Clear DTCs, Data Stream & Graphing like fuel trims/misfire/trans oil temp/ mass airflow/ clutch sensors/ O2 sensors/ ABS speed sensors, export data as CSV, and active tests(bidirectional controls), retrieve freeze frame & ECU info and turn off warning lights/reset monitors on various systems.
Intelligent Topology Map to Faster Diagnosis
XTOOL INPLUS IP919PRO auto diagnostic scan tool new-added intuitive topology module mapping, having everything in a view on the communication structure between modules just one click to display all fault codes, executive functions and view live data in graphing directly. Help technicians to save time and effort! Shop Repair efficiency improved at least by 60%! Note: Do not available for All Vehicles
Bi-directional Control (Active Tests)
INPLUS IP919PRO is a full bi-directional control scan tool that can command car ECUs to perform various active tests like: Injector Tests, Fuel Injector Balance, Compression Test, Cooling Fan, A/C Clutch On/Off, ABS Motor Pump, Windows/Wipers/Sunroof/Doors, to provide in-depth diagnostic tests and pinpoint fault causes like locating bad injector efficiently & accurately. Note: Active Tests available vary across vehicles. Older vehicles tend to have less tests available.
Professional Immo/Key Programming
The IMMO service can disable a lost vehicle key and program the replacement key fob. One or more replacement key fobs can be programmed. like programming new key fobs, Read PIN Code/Pin Code calculation, Check number of keys, Generate key, Add key, All key lost
51+ Special Functions Make Repairing Easier
INPLUS IP919PRO Auto Scan Tool Comes With Comprehensive Special Functions: Oil Reset, EPB, SAS, BMS, Throttle, Injector Coding, ABS Bleed, Immobilizer, A/T Match, Suspension, TPMS Reset, Headlight, Window, Seat, Power Balance, ABS Initialization, VSC Yaw Rate, SWS Calibration, Fuel Alcohol, Content Reset, Trans Fluid Counter Reset, Idle Relearn and etc. Note: Special Functions do NOT work on all cars.
Support CAN FD/DOIP Protocols
Compatible More CAN FD Protocol Vehicles (For GM Vehicles After 2020) (CAN FD Adapter NO Needs Buy Separately); DOIP Function Compatible For BMW E/F/G Chassis, Jaguar, Land Rover vehicle makes.
3 Years Software Update, Lifetime Technical Support
INPLUS IP919PRO is equipped with one-click online update and 3-year free update to get the latest software, which can support more functions and new model coverage. Even after the free update has expired, the device will still work normally. If you encounter any problems, our technicians will serve you for free for life.
15 Language Supported
English, German, Spain, French, Polish, Portuguese, Russian, Italian, Turkish, Traditional Chinese, Japanese, Korean, Vietnamese, Arabic, Finnish. English is default language, if you need other language, Please send the S/N to us authorized language.
Top Hardward Configuration
➡️Pre-Scan and Post-Scan➡️Added FCA AutoAuth➡️Android 10.0 Systems➡️Support CAN FD/DoIP➡️Intelligent Topology Map➡️10.1 Touch Screen➡️6400mAh 7.2V Battery➡️1920*1200 Resolution➡️8 Core 4.0GHz CPU Processor ➡️8GB + 128GB Memory
2025 New Updates Pre-scan & Post-scan
>>> Pre-Scan:
1. Problem Identification: Pre-scan accurately identifies potential issues before any repairs are made, ensuring a targeted repair plan.
2. Increased Efficiency: By generating a detailed diagnostic report, technicians can create a more efficient repair strategy, saving time and resources.
3. Safety Assurance: Ensures that systems related to driver and passenger safety, comfort, and convenience are thoroughly checked before repairs, reducing the risk of subsequent problems.
4. Preventive Maintenance: By detecting issues early, pre-scan promotes preventive maintenance, minimizing the chances of future failures.
>>> Post-Scan:
1. Verification of Repair Effectiveness: Post-scan provides an important step to confirm whether the repairs were successful, ensuring that all systems are functioning properly.
2. New Fault Detection: The post-scan can detect any new diagnostic trouble codes (DTCs) that may have arisen during the repair process, ensuring the vehicle's overall performance.
3. Customer Confidence: By presenting the results of the post-scan, technicians can demonstrate to customers that all repairs have been successfully completed, enhancing customer trust.
4. Data Recording: The results of the post-scan can be recorded for maintenance history, providing a reference for future service and maintenance needs.
Bidirectional Control 4000+ Active Test
XTOOL InPlus IP919PRO bidirectional scanner supports active test to output the command into the ECU to request information or command a module to perform specific tests and functions. To find faults in the subsystems of your car effortlessly, without using the vehicle’s control.
Most-Used Active Tests: 1. EVAP Test 2. Injector Buzz Test 3. Window/Mirror/Door Lock Test 4. A/C Clutch On/Off 5. ABS Pump Cycling 6. Pump and Value Tests 7. Interior & exterior lights Test 8. Sound horn Test etc.
OE-Level Full System Diagnostic
Inplus IP919PRO can perform complete system diagnoses to check ECU info, read codes, clear codes, read freeze frame and live data. It can carry out a comprehensive diagnosis for cars' system, such as the engine, airbags, chassis, body, network system, transmission, anti-lock system, etc.
It is suitable for all system, including ABS system, Engine system, SAS system, TPMS system, IMMO system, Battery system, Oil service system, SRS system, etc...ECM System (Engine Control Monitor), SRS (Supplement Restraint System), TCM (Transmission Control Module), IMMO (Immobilizer), ABS (Anti-lock Braking System), TPMS (Tire Pressure Monitoring System), BMS (Battery Monitor System), etc.
Diagnostic Smart Topology Map
Inplus IP919PRO is equipped with an intelligent topology map, which allows for a more intuitive visualization of the system condition and a quick identification of which diagnostic line the faulty system belongs to.
FCA AutoAuth
FCA (Chrysler Motors Corporation) has added the Security Gateway Module to the model year 2018 onwards, which requires identity registration as well as verification in order to perform some special diagnostics as well as other functions on the vehicle.
Inplus IP919PRO support identity verification, so it can diagnostic for FCA cars directly.
DOIP / CANFD Protocol
Inplus IP919PRO Support DOIP & CAN FD Protocol, It can diagnostic with ultra-high data transfer rates, and it is also one of the most important means of solving the problem of rapid ECU updating, calibration, and remote diagnostics.
51+ Special Service Functions:
Doing regular and routine maintenance on a modern car is impossible without a diagnostic system. Even the simplest procedures require the participation of an auto scanner. That's why XTOOL engineers have been working on them and making them as user-friendly as possible in the new XTOOL IP919PRO Diagnostic Scanner. Now you can easily do functions like:
●Oil Reset: Reset new calculation of Engine Oil Life System for an accurate reading of next oil change.
●EPB: Reset the calipers, brake discs or pads after the electronic parking brake system is repaired.
●ECU Configuration: Re-flash the hidden function of the car and customize the vehicle as need.
●Fuel Trim Reset: Reset the fuel trims provides for a chance that your adaptive fuel map could become stable.
●DPF Regeneration: Clear PM from the DPF filter through oxidation or combustion to stabilize the filter performance.
●Throttle Relearn: Initialize the throttle actuators to the default state;
●TPMS (Tire Pressure Monitor System) Reset: When the tire pressure is insufficient, it is necessary to reset the tire pressure after replacing the tire or sensor, make your car recognize the new TPMS sensor.
●ABS Bleeding: Perform to bleed the brake system to restore ABS braking sensitivity and obtain a firm brake pedal
●Injector Coding: Code a new injector to better identify injectors to accurately control fuel injection.
●IMMO /Key Programming: Remote Key/Key Fob add and programming+ Read Pin Code+ IMMO Reset, etc.
●Gearbox Reset: Help complete the gearbox self-learning to improve gear shifting quality
●Suspension: Adjust the vehicle height sensor for level calibration when replacing the vehicle height sensor or control module in the air suspension system.
●SAS: Adaptation of the sensor to the angular position of the steering wheel
●Airbag Repair: After replacing the Airbag, reset the Airbag data and clear the collision data.
●Headlight Matching: initialize the adaptive headlamp system.
●BMS (Battery Management System) Reset: Re-match the control module and motoring sensor for battery detecting more accurately, clear original low battery information, and prevent the related control module from detecting false information.
A/C Relearn, Write VIN, HV Battery, Window Initialization, Seat Configurations, Power Balance, Electronic Pump Activation, Disable Transportation, Tire Refit, A/F Reset, Start/Stop Reset, Rain/Light Sensor, Brake Reset, instrument cluster, transporte Mode, Gear Learning, EEPROM, ADAS Calibration, speed limit, clutch adaption, Adblue Reset, EGR Relearn, FRM Reset, Nox Reset, VGT Relearn, Control unit Reset, Language Change. And many more.
The new service functions keep updating from XTOOL, including new services and expand coverage for the latest vehicle makes and models.
XTOOL INPLUS IP919PRO Professional Key Programming/Immo Equipment
The IMMO service can disable a lost vehicle key and program the replacement key fob. One or more replacement key fobs can be programmed. like programming new key fobs, Read PIN code/pin code calculation, Check number of keys, Generate key, Add key, All key lost.
➤Read PIN Code/Pin Code Calculation
➤Check Number of Keys
➤Generate Dealer Key
➤All Key Los
➤Add Key
➤Delete Key
Note: This Key Programming Function is not Universally Compatible, Please Check Compatibility with us if necessary.
Advanced ECU Programming
XTOOL INPLUS IP919PRO Professional Diagnostic Scan Tool can Perform Online ECU Programming on BMW, Mercedes Benz, Volkswagen, Offline ECU Programming on Ford, Lincoln, Mazda and ECU Coding on Volkswagen, Audi, Skoda and etc to program/reflash ECUs, perform Online Calibrations, Online Parameterizations and customize car settings.
1. Perform Online ECU Programming on ECM, PCM, BCM For BMW/BENZ/VW, to:
Replace the existing software, firmware in the ECU；Program/reflash new modules after ECU replacement；Fix software-controlled driving performance and emission issues.
2. Perform Offline ECU Programming For Ford/Lincoln/Mazda, to:
Copy the codes from old module to the new one when you have swapped the ECU/Module from a doner car；Perform Programmable Module Installation(PMI) to reprograms the adaptive data for certain components after repairs or replacements.
XTOOL IP919PRO OBD2 scanner performs ECU Coding, Component Matching, Adaptive Data Reset, Flash Hidden Functions, etc to optimize vehicle performance and customize car settings.
Offline Coding: For VW(For VW / AUDI / Skoda) / for BENZ / for Mitsubish;
Online Coding: For BMW;
2. Red Light: Lit up when device is being charged.
3. Blue Light: ①Lit up when device power on. ②The device is still on the base when fully charged.
NOTE: Just a Removable Base, Without Battery Inside.
2025 XTOOL KC501 Key Programmer - Included
Why Choose XTOOL KC501 Key Programming Adapter?
- Powerful IMMO & Key Programming
- Read Remote Control Frequency
- Perfect Match with XTOOL Advanced Devices
- Used with Windows PC/Laptops
- Wide Car Coverage
Compatible with most 12V Petrol Sedans, SUVs, Minivans and Light Duty Trucks around the world, including the United States, Europe, Asia, Australia, etc.
- Broad Applicable User
Car Owners, Auto Repair Students, DIY Enthusiasts, Auto Dealers, Home & Professional Mechanics, Technicians, Car Engineers, Garages, Workshops and Car Repair Shops.
- Includes 2 years warranty and Lifetime Technical Help
XTOOL KC501 Auto Key & Chip Programming Tool Not Only Contains All The Functions of the KC100 Key Programmer and EEPROM Adapter, But Also Supports Other IMMO Functions and Key & Chip Programming Features.
>>Key Matching for Audi/for Skoda/for VW 4th & 5th, for MQB and for BMW CAS1-CAS3++.
* Read & Write MCU/ECU/EEPROM Chips.
* Read Remote Control Frequency, Chip Type & Transponder ID.
>>Read & Write Infrared Keys for Mercedes Benz:
* For A Series 2005-2013
* For B Series 2005-2014
* For C/For CLK Series 2006-2014 | For CLA Series 2006-2016
* For E Series 2005-2015
* For G Series -2015 | For GL/For GLS Series 2006-2014 | For GL/For GLK Series 2008-2015
* For M/For ML Series 2006-2013
* For R Series 2006-2017
* For S Series 2006-2012 | For SLK/For GLC Series 2006-2016.
Because functions are NOT universally compatible with all vehicles. To further check compatibility with the VIN number and the required functions.
XTOOL KC501 Key & Chip Programmer Compatible with X100 PAD3/X100 PAD3 SE/X100 MAX/D8/D8 BT/D9/D9 Pro/A80/A80 Pro/A80Pro Master and more XTOOL Advanced Devices.
It also compatible with Windows PC/laptop for Windows 7 & Above Operating Systems.
Warm Tips:
1. Please install "KC501 Studio" application on your PC/laptops first.
2. Please shut down all antivirus software when installing the "KC501 Studio" app.
* KC501 CANNOT be Used Alone.
Steps to Connect XTOOL Wireless Tool to a Car:
1. Connect VCI and main cable with car’s OBD port, which is usually under the dashboard.
2. Turn on XTOOL Wireless Tool and pair BT with VCI.
3. Connect XTOOL Wireless Tool and KC501 with a USB cable. Then enter immobilization menu and follow the instructions on the XTOOL Wireless Tool.
Steps to Connect XTOOL Wired Tool to a Car:
1. Turn on XTOOL Wired Tool.
2. Connect car’s OBD port with wire. OBD port is usually under the dashboard.
3. Connect XTOOL Wired Tool and KC501 with a USB cable. Then enter immobilization menu and follow the instructions on the XTOOL Wired Tool.
Product Details
> Remote Control Transponder Induction Area: Used to read & write remote control transponder data.
> Transponder Slot: Place the transponder. Used to fix the transponder to read & write transponder data.
> Vehicle Key Slot: Place the vehicle key. Used to fix the vehicle key to read & write vehicle key data.
> Infrared Key Slot for Benz: Used to fix infrared key for Benz to read & write vehicle key data for Benz.
> Display Screen: Used to show remote frequency or transponder ID.
> Remote Frequency Button: Press this button to show remote frequency in the display screen
> Transponder ID Button: Press this button to show transponder ID in the display screen.
> Status Indicator LED: Indicate the current operating status.
> IC Card Induction Area: Used to read & write IC card data.
> Locker: Lock the EEPROM component transponder slot to ensure normal operation. Used to place EEPROM chip or socket to read & write EEPROM data.
> Cross Signal Pins: Fix the MCU board, MCU spare cable or DIY signal interface. The Cross-shaped signal pin is used to place MCU board, MCU spare cable or DIY signal cable to read & write MCU and ECU chips.
> EEPROM Component Transponder Slot: Place the EEPROM plug-in transponder or EEPROM socket.
> USB-B Port: Provide data communication and 5V DC power supply.
> DC Port: Provide 12V DC power supply.
> DB 26-Pin Port: Connect with the infrared cable for Mercedes Benz, ECU cable, MCU cable, MC9S12 cable.
Useful Accessories
- PCBA EEPROM: Used to read & write EEPROM chip on bench.
- FQFP Boards: Weld microcontrollers on these boards to make jump wires more easily.
- IC EEPROM Chip Test Stand: EEPROM chip in place to read & write EEPROM chip on bench.
- Color Cable: connect to 26-Pin connector and used to jump wires for reading & writing data on modules.
- DuPont Cable: Separated cables for multi- purposes, like jumpers, read data, etc.
- IC Clip Cable: A chip clip to read & write EEPROM chip without sealing-off the chip from the module.
- IR Key Emulator for Benz: Used to Read/Collect EIS/EZS data on key programming process for Benz.
- XTA Cables: Wiring harnesses for ECU reading & writing.
Technical Parameter:
Display: 0.96-in 128x64 Monochrome OLED Screen
Input Voltage: 5V (USB-B)/12V (DC)
Working Temperature: -10~50℃ (14~122℉)
Storage Temperature: -20~60℃ (-4~140℉)
Related Humidity: < 90%
Relative Humidity: 10%~90%
1pc x Accessories
1pc x Certificate Of Quality
1pc x Packing List
1pc x User Manual
1pc x Carton
1pc x Test Connectors
1pc x MCU FQFP176
1pc x MCU FQFP64
1pc x XTA001 Clamp
1pc x IC Clamp
1pc x MCU FQFP112
1pc x MCU FQFP144
1pc x MCU FQFP80
1pc x IC EEPROM Socket
1pc x EEPROM Adaptor (With bracket)
1pc x XTA002 Clamp
1pc x XTA003 Clamp
1pc x 26 PIN Cable
1pc x 24AWG Cable
1pc x Tool Case
1pc x Main Units
1pc x KC501 K=y & Chip K=y Programmer
1pc x USB_TYPE-B
1pc x USB_TYPE-C
1pc x Charger (With Power Supply Cable)
1pc x for Benz Infrared cable
Free Gift - XTOOL XV200 1080P HD ENDOSCOPE
1. Automobile: It is used to check the quality of the engine, oil pressure parts, nozzle part and assembly inspection. Industrial machinery: used for inspections, boilers, heat exchangers; mechanical equipment and manufacturing devices.
Overall, the XV200 seems well-suited for detailed inspections in various environments, combining high-resolution imaging with durability and flexibility.
