ANCEL Ultrasonic Cleaning Machine Fuel Injector Cleaner Tester For Petrol Cars
Top Reasons to Choose ANCEL ANJ400 4-cylinder Fuel Injector Cleaner & Tester
● [ 100w Ultrasonic Cleaning ]: Start the machine, and press the key to modle 8.  lt can perform ultrasonic cleaning on single or multiple injectors simultaneously, which can eliminate thoroughly blockages on the injector accessories and internal.
● [ Automatic Control/Real-time Monitoring ]: Microcomputer automatic control and digital display technology: the cleaning and detection process can be automatically controlled, and the main status parameters can be monitored in real time.
● [ 9 Kinds of Fuel Injector Tests ]: ANCEL ANJ400 Fuel injector Cleaner is capable of various testing, including 2-idle speed test, 3-medium speed test, 4-high speed test, 5-accelerating test, 6-variable speed test, 7-leakage test, 8-idle spray test, 9-medium spray test, 10-high spray volume test.
● [ 2000ml Large Capacity of Cleaning Tank ]: ANCEL ANJ400 Fuel injector Cleaner only weighs 12KG, allowing to carry around. With 2000ML large capacity ultra cleaning tank, all injectors can be cleaned at one time, which save much time and more efficient.
● [ Multi Voltage Selection ]:: Ancel ANJ400 Fuel Injector 4-cylinder Cleaner and Tester designs with various types of voltage output (12V, 70V & 120V) to be selected to adapt for different types of injector testing.
● [Various Parts equipped ]:: It is equipped with a variety of injector accessories for different needs.
● [ Environmental Friendly& Widely Use ]: The used cleaning fluid and testing fluid can be easily recovered.  Support most of the automobile and motorcycles in the market.  Applicable voltage is compatible with 110V or 220V.
● [ 3 Years Warranty ]: For damage caused by non-human factors, ANCEL promises to resend parts for free within 3 years.   For any needs, you are warmly welcomed to contact us and we will get back to you ASAP within 24 hours.

ANCEL ANJ400 Introduction

ANCEL ANJ400 is an entry-level model for testing and cleaning of motorcycle and automobile fuel injectors. It adopts ultrasonic cleaning technology and microcomputer oil pressure closed-loop control cleaning technology, and supports simultaneous cleaning and testing of four-cylinder fuel injectors. This ANJ400 injector machine simulates various working conditions of the engine which can clean and test the fuel injectors of most of the automobiles and motorcycles. It is compact in size and simple to operate, making it suitable for small and medium-sized auto and motorcycle repair shops and DIY users.
 
Notice: This product supports 99% of petrol injector cleaning and testing.  However, for diesel injectors, it only supports cleaning and not testing.

ANCEL ANJ400 Main Functions:

1. Ultrasonic cleaning: To clean injectors to remove carbon deposition completely
2. Resistance test: To test the resistance of the fuel injector
3. Uniformity/spray test: To test the uniformity of injection quantity of each injector and monitor the spray status of each injector
with the help of the backlight
4. Leak test: To test the sealing and dribbling conditions of injectors under system pressure
5. Injection flow test: to check the injection quantity of the injector in 15 seconds of constant injection
6. Working modes test: To test injectors in different working conditions
7. In-Vehicle Cleaning: Coming with a variety of disassembly-free cleaning connectors, the device can be used to perform in-vehicle cleaning and maintenance for various vehicle models
8. Low-resistance injector test function: Through the dedicated motherboard, support long and full low-resistance fuel injector test, such as 1 ohm
9. Multiple item settings: Set different device parameters, including ringer sound level, screen brightness and backlight brightness
10. Version information: To check the current device software version information
 
 
ANCEL ANJ400 Main Features
▶ The special structure design makes the disassembly and assembly of the fuel separator easier and  greatly improves the work efficiency.
▶ With the resistance test of the injectors one by one, get to know the condition of the injectors.
▶ The ultrasonic cleaner is integrated on the machine, which makes the operation easier and more efficient.
▶ With the dedicated motherboard, it can support the full and long test of low resistant fuel injector such as 1 ohm.
▶ The unique fuel circuit depressurization technology can make the machine automatically depressurize in the case of sudden shutdown, avoiding equipment damage or personal injury.
▶ The brightness of the screen and backlight, and the level of the buzzer can be manually set and saved.
▶ The product adopts fuel pressure adjustment and control technology by microcomputer, which can ensurestable fuel pressure and wide adjustable range. It is applicable to vehicles equipped with a variety of gasoline injection systems. Meanwhile, the automation of injectors’ cleaning and testing processes can be realized.
▶ Thanks to the adoption of microcomputer automatic control and digital display technologies, the cleaning and testing processes can be controlled automatically, and the parameters of the main status can be monitored in realtime.
▶ Adopting humanization design can make the system pressure fast restored to the default values.
 

It is an expert in injector solutions, featuring 11 injector-specific functions

01. Ultrasonic cleaning: It sends signals to the injectors through the pulse signal line, using the cleaning fluid with the ultrasonic vibration so as to completely remove the carbon and impurities inside the injectors.
02. Idle speed test (0-20ms): Simulate the engine idling speed and test the state of the fuel injector.
03. Medium speed test (0-7.5ms): simulate the engine running at medium speed and test the state of the fuel injector.
04. High-speed test (0-4ms): Simulate the high-speed performance of the engine and test the state of the fuel injector.
05. Acceleration test: Simulate the acceleration state of the car and test the performance of the fuel injector.
06. Shift speed test: Simulate the shifting state of the car and test the working performance of the fuel injector.
07. Leakage test: Test the sealing condition of the fuel injector.
08. Idle dpeed sprayability Test: Simulate the engine idling state and test the spraying performance of the fuel injector.
09. Medium speed sprayability test: Simulate the engine medium-speed state and test the spraying performance of the fuel injector.
10. High-speed sprayability test: Simulate the high-speed state of the engine and test the spraying performance of the fuel injector.
11. Main unit information: used to store the product number and date of manufacture of the product.
 

Ultrasonic Cleaning Operation:
1.Pour in the injector detergent and place the injectors in the ultrasonic cleaner tank.
2.Connect the pulse signal wire and select the ultrasonic cleaning function to start working.

Fuel Injector Testing Operation:
1. Pour in the test liquid,install the fuel injector is to the fuel dstributor and fix main unit body
2. Test if the injector is leaking or blocked under different functions.

How to choose test fluid?
The test fluid is used to test and judge whether the performance of the fuel injector is in good condition. It is a colorless and transparent liquid with no irritating odor, non-corrosive, and not easy to emit. Its function is to simulate various working states of the fuel injector as a medium. In order to achieve the best test effect, it is recommended to use professional automotive injector test fluids. If it is not available locally, as an alternative, it's recommended that medical alcohol with an alcohol content of more than 75% can be used instead of the test fluid.
 
How to choose cleaning fluid?
Cleaning fluid is used to clean deposits (such as carbon deposits) on fuel injectors, and it is usually highly corrosive and flammable. In order to achieve the best test effect, it is recommended to use professional injector ultrasonic cleaning fluid. If it is not available locally, it's recommended that medical alcohol with an alcohol content of more than 75% can be used instead of the cleaning fluid, but note that the effect may not good enough.
 
Working Conditions& Specifications:
Temperature: -10~+40℃ Relative humidity: ＜85%
Intensity of outer magnetic field: ＜400A/m
No naked flame within 2m.
Main unit power supply: AC220V±10%,50Hz/60Hz or AC110V±10%,60Hz
Input power: 230W
Ultrasonic cleaner power: 100W
Resistance test accuracy: 0.1Ω
Simulated RPM range: 100～9900rpm, step: 10rpm
Time range: 5～300s, step: 5s
Pulse width: 0.1～25ms, step: 0.1ms
Fuel tank capacity: 2000ml
Work pressure: 0-7ba
 
 
 Packing List:      
1 x Fuel Injector Tester & Cleaner
2 x adjusted screw
1 x Fuel feed funnel
1 x  Fuel pipe
4 x 5 Φ11 underlay of injector
4 x  Injector plate Φ14 flat plate
1 x  Pulse line of injector（4 injectors)
1 x  Power line
4 x Special line
1 x Top feed injector rail
10 x Sealed ring of connectors(7.52x3.53)
3 x R1/4blank plug
4 x European standard connectors Φ13.6
4 x Standard connectors Φ10.6
4 x Connector of Benz mechanical injector (M12x1.5)
4 x Conector de inyector Φ12.5 (GDI Conector)
4 x Conector de inyector Φ9.8 (GDI Conector)
4 x Conector de inyector ΦM18 (GDI Conector)
1 x Tool box
 
  • We accept Credit cards、Debit card、Apple Pay、Google Pay ect payment.
  • Please contact us first if you need to use another method to pay.
  • Payment should be made within 3 days after bidding ends, or we would cancel it for you.
  • Buyers should be responsible for any taxes.
  • Please include your special requests in eBay note if there is any.
 
  • Seller Processing Time：Items would be shipped out within 1 business day after cleared payment.
  • Carrier and Logistics：All Orders are Free shipping via Royal Mail (Logistics: Royal Mail Tracked 24/48). If you need express, extra postage price would be charged.
 
  • VAT Fee: The price has included a 20% VAT fee, which is charged by the EBAY platform, not by the seller.
  • Guarantee: 100% Genuine, 7 Days Free Exchange, 1 Month Free Return and Full Money Back Guarantee, Lifetime Free Technical Support.
  • Warranty: 12 months free repair for the devices.3 months for the accessories. Please contact us firstly when you need warranty service. Please contact us firstly when you need warranty service.
  • We are selling OBD Product, including OBDII Code Reader, Car Diagnostic Tool, Truck Diagnostic Tool, EVAP Smoke Machine, Car Power Probe,Battery Tester ect. The price is reasonable and we have top rated after-sales service.
  • Our main brand is ANCEL, and we also sell other brands product, such as FOXWELL, LAUNCH, THINKCAR, AUTOPHIX, etc
  • We have office and warehouse in UK, Australia and US to ensure fast shipment and after-sale service.
  • We have more than 100 employees devoting to customer satisfaction.

 
 
 
  • Our customer-oriented service strives for positive feedback with all 5 star selling ratings.
  • We automatically submit positive feedback to our buyers once the payment is cleared.
  • If anything about your transaction did not meet your expectations, PLEASE LET US KNOW AND GIVE US THE OPPORTUNITY TO MAKE THINGS RIGHT before you leave feedback or open any case.
  • We are 100% sure that we can solve any issues regarding your purchase.
  • We will reply within one business day. Business time: GMT8 (9:00-18:00) from Monday to Friday.

On 04-Dec-2025 at 07:35:34 GMT, seller added the following information:

Datacaciques