• Perfect after-sales service: 1.We maintain high standards of excellenceand  strive for 100% customer satisfaction! Please don't open cases or return requests without contacting us. If you have any questions about quality, shipping or other problems, please contact me first via eBay message. I will give you a satisfy solution. 2.If you are not sure if these are the right parts for your truck please email me your bill of material number and i will check it for you
  •  
  • Motoroza

    24" THROTTLE CABLE BRAIDED STAINLESS STEEL UNIVERSAL ACCELERATOR For FORD, CHEVY

    Perfect after-sales service:
    1.We maintain high standards of excellenceand  strive for 100% customer satisfaction!
    Please don't open cases or return requests without contacting us.
    If you have any questions about quality, shipping or other problems, please contact me first via eBay message.
    I will give you a satisfy solution.
    2.If you are not sure if these are the right parts for your truck please email me your bill of material number and i will check it for you

     

    Description:
    100% quality assurance tested, more responsive, less expensive, and easier to install.
    Feature a "U-Cut-to-Fit" outer housing and stainless inner wire.
    Designed with a specially extruded liner for the extended life of the cable.
    Equipped with aluminum fittings and aluminum ferrules to eliminate fraying.
    Designed without cotter pins or set screws and adapt to factory and aftermarket pedals for an easy installation.

    Fitment For 
    Carbureted.
    86-93 Ford Mustang 302 5.0L.

    Installation Instructions:
        Before beginning the installation, disconnect the negative battery cable and use wheel chocks to block the vehicle's wheels.
        The hole in the firewall must line up with the hole in the upper arm on the Throttle Pedal. Determine exactly where the Throttle Cable needs to pass through the firewall.
        Remove the carb end assembly. Pull the inner wire out of the cable housing.
        Insert the firewall fitting through the firewall from the engine side.
        Insert the throttle cable adjuster into the Cable Mounting Bracket. NOTE: There must be some slack to allow for engine movement.
        Reinstall the inner wire into the cable housing from inside the passenger compartment. Connect the clevis (or the ball end if the clevis was removed) to the Throttle Pedal.
        Attach the carb end assembly to the throttle arm. Tighten the nut.
        Cut the inner wire off so that roughly 1" of the inner wire will remain inside the carb end assembly.
        Insert the inner wire into the carb end assembly. Pull all the slack out of the inner wire and tighten the set screw in the carb end assembly.

        Check for proper operation of the throttle (and Kickdown if equipped) and adjust as necessary. Make sure there is no binding in the throttle linkage and that the throttle returns to the closed position when the pedal is released.

     

    Package Includes:
    1x Throttle Cable;
    1x Wrench.


    Item Specifics
    Cable Length (in) 24.000 in.
    Color Silver
    Fitment Type Direct Replacement
    Items Included Mounting Hardware
    Material Aluminum
    Cable Jacket Finish Natural
    Placement on Vehicle Throttle
    Brand motoroza
    Type Throttle Cable
    Manufacturer Warranty 3 Years
    Throttle Cable Style Braided stainless wire
    Performance Part Yes

    Payment

    Variety of payment methods are accepted,  such as credit, debit,  Apply pay, Google Pay, Paypal and Paypal Credit.

    Shipping

    1.The item will be shipped within 24 hours on payment received except the holidays. (except weekends & official holidays).  You can log on to eBay to check your logistics tracking number.

    2.Please confirm address before purchase, and cannot change address once purchased.

    3.If you need to receive the item quickly, please contact us, you can pay the postage to choose other logistics.

    Returns

    1.  We offer 60 days return policy.
    2.  Please contact us if you have any questions with the products .
    3.  Refund will be sent after we got your returned package.
    4.  All returned items should be in the original packaging with tracking number.

    Contact Us

    We work from Monday - Saturday 8:30AM - 5:30PM, but we will reply once we get your message.  There will be delay on response if you send message or E-Mail on Sunday.

    About US

    1.Our goal is complete customer satisfaction.  We will be very honored to provide you with quality service.

    2.If there is an issue with shipping or the item you purchased please contact us via ebay message or call us before opening a case or leaving feedback. We will try our best to resolve any kind of issue.

    Motoroza

    Help & Info
    Payment Policy
    Shipping Policy
    Return Policy
    FAQ
    About Us
    24" THROTTLE CABLE BRAIDED STAINLESS STEEL UNIVERSAL ACCELERATOR For FORD, CHEVY

    Perfect after-sales service:
    1.We maintain high standards of excellenceand  strive for 100% customer satisfaction!
    Please don't open cases or return requests without contacting us.
    If you have any questions about quality, shipping or other problems, please contact me first via eBay message.
    I will give you a satisfy solution.
    2.If you are not sure if these are the right parts for your truck please email me your bill of material number and i will check it for you

     

    Description:
    100% quality assurance tested, more responsive, less expensive, and easier to install.
    Feature a "U-Cut-to-Fit" outer housing and stainless inner wire.
    Designed with a specially extruded liner for the extended life of the cable.
    Equipped with aluminum fittings and aluminum ferrules to eliminate fraying.
    Designed without cotter pins or set screws and adapt to factory and aftermarket pedals for an easy installation.

    Fitment For 
    Carbureted.
    86-93 Ford Mustang 302 5.0L.

    Installation Instructions:
        Before beginning the installation, disconnect the negative battery cable and use wheel chocks to block the vehicle's wheels.
        The hole in the firewall must line up with the hole in the upper arm on the Throttle Pedal. Determine exactly where the Throttle Cable needs to pass through the firewall.
        Remove the carb end assembly. Pull the inner wire out of the cable housing.
        Insert the firewall fitting through the firewall from the engine side.
        Insert the throttle cable adjuster into the Cable Mounting Bracket. NOTE: There must be some slack to allow for engine movement.
        Reinstall the inner wire into the cable housing from inside the passenger compartment. Connect the clevis (or the ball end if the clevis was removed) to the Throttle Pedal.
        Attach the carb end assembly to the throttle arm. Tighten the nut.
        Cut the inner wire off so that roughly 1" of the inner wire will remain inside the carb end assembly.
        Insert the inner wire into the carb end assembly. Pull all the slack out of the inner wire and tighten the set screw in the carb end assembly.

        Check for proper operation of the throttle (and Kickdown if equipped) and adjust as necessary. Make sure there is no binding in the throttle linkage and that the throttle returns to the closed position when the pedal is released.

     

    Package Includes:
    1x Throttle Cable;
    1x Wrench.

    Item Specifics
    Cable Length (in) :24.000 in.
    Color :Silver
    Fitment Type :Direct Replacement
    Items Included :Mounting Hardware
    Material :Aluminum
    Cable Jacket Finish :Natural
    Placement on Vehicle :Throttle
    Brand :motoroza
    Type :Throttle Cable
    Manufacturer Warranty :3 Years
    Throttle Cable Style :Braided stainless wire
    Performance Part :Yes


    Variety of payment methods are accepted,  such as credit, debit,  Apply pay, Google Pay, Paypal and Paypal Credit.

    1.The item will be shipped within 24 hours on payment received except the holidays. (except weekends & official holidays).  You can log on to eBay to check your logistics tracking number.

    2.Please confirm address before purchase, and cannot change address once purchased.

    3.If you need to receive the item quickly, please contact us, you can pay the postage to choose other logistics.

    1.  We offer 60 days return policy.
    2.  Please contact us if you have any questions with the products .
    3.  Refund will be sent after we got your returned package.
    4.  All returned items should be in the original packaging with tracking number.

    We work from Monday - Saturday 8:30AM - 5:30PM, but we will reply once we get your message.  There will be delay on response if you send message or E-Mail on Sunday.

    1.Our goal is complete customer satisfaction.  We will be very honored to provide you with quality service.

    2.If there is an issue with shipping or the item you purchased please contact us via ebay message or call us before opening a case or leaving feedback. We will try our best to resolve any kind of issue.


    On Apr 13, 2026 at 01:29:12 PDT, seller added the following information:

    Datacaciques