150ml/200ml/250ml/300ml/500ml/1000ml All Glass Syringes Large sausage device Glass Injector large caliber with luer lock

Material: Made of hard glass, composition by shell and inner core.
Specifications: 150ml, 200ml, 250ml, 300ml 500ml and 1000ml.

Usage:

The product is fitted with an injection needle, as the body for subcutaneous, muscle, intravenous or dissolved drugs.

Specification:

150ml
Inner diameter: 48mm
Outer diameter: 54.5mm
Inner diameter of water outlet: 6mm
Outlet diameter: 10mm

200ml
Inner diameter: 48mm
Outer diameter: 55mm
Inner diameter of water outlet: 8mm
Outlet diameter: 13mm

250ml
Inner diameter: 53.6mm
Outer diameter: 60mm
Inner diameter of water outlet: 8mm
Outlet diameter: 13mm

300ml
Inner diameter: 53.6mm
Outer diameter: 60mm
Inner diameter of water outlet: 8mm
Outlet diameter: 13mm


500ml
Inner diameter: 67.5mm
Outer diameter: 75mm
Inner diameter of water outlet: 9mm
Outlet diameter: 15mm

1000ml
Inner diameter: 83mm
Outer diameter: 90mm
Inner diameter of water outlet: 6mm
Outlet diameter: 10mm

Instructions:

1. Before use, please pull out the core sleeve, then routine cleaning and disinfection.
2. After cleaning, disinfection and set up needle, please extract liquid and place needle up, then gently push the core, clean the air inside the syringe to avoid the air into the body.
3. Please take out the core sleeve and clean immediately after injection of powder, oil, plasma, etc., so that it is not to stick.

Precautions:

1. Do not use heavy alkaline solution before disinfection,it can avoid heavy glass to cause water leakage
2. It can extend shelf life if wrapped in gauze.
3. Disinfection methods: ethylene oxide disinfection.
4. Pplease gently clean when match the core and shell to avoid stuck lead to rupture of the shell. If jam the syringe please shake it slightly on the table, then it can be removed.
5. Please be careful to take the syringe gently when washing and disinfection, to avoid collision and damage.