Feature: Wide Compatibility-The suction adapter is universal for various special diameter round pipes, no need to worry about diameters. The suction adapter is made of high quality silicone materials, which are durable. The inflatable block-off bladder is equipped with a pressure-resistant vapor passage, effectively testing intake or exhaust systems in less time. This intake adapter is good value for money. Suitable for most car lines - Simple operation, in line with people's operating habits, product quality and reliable, easy to carry, no difficult operation. The intake adapter has good sealing properties, which can be used in all kinds of bad conditions. Poor seals make the test result unsatisfactory. Works on all cars. The intake adapter fits all vehicles, from passenger cars to heavy trucks. Compatible with all diagnostic leak detectors. Note: This universal air intake adapter supports all smoke detectors (such as S1000 / S2000 / S3000), it is also compatible with 100% air intake or exhaust vent of cars including small car and heavy duty car.
1. Inflation is to seal the air inlet. It can work normally even if the inflated airbag is not perfectly round. 2. Please clean the inner wall of the intake port while the air filter and throttle fittings are removed to avoid scratching the adapter. 3. Please clean the adapter for storage to avoid contact with corrosive liquids. Instruction: 1. Close the pressure relief valve. 2. Put the rubber component in the suction hole of the tube. 3. Inflate the rubber part by pressing the hand pump until the suction opening is tightly closed. 4. Now the system is ready for testing. Introduce air/smoke into the system by inserting the smoke nozzle into the pipe opening. 5. After the test, pull out the smoke nozzle, release the inflated air by opening the pressure release valve and fininshed. Specification: Material Silicone Rubber Color Black Product Size 51cm in Total Length Product Weight 200g Package Includes: 1 x Intake Adapter Inflatable Bladder |