Furnier black colored wood veneer black saraifo 250x64-66cm

Item description

You will receive this article in the following dimensions per leaf:     

Length cm

Width cm approx.

Leaf

Strength mm approx.

 

250

+/- 64-66

1

0.45-0.50 +/-

 

This is black -colored Saraifo* veneer. This wooden veneer is pressed out of many fine real wood slats under several production processes (E1) and then processed into this flat veneer. Furniels are only available as raw material in the raw cut!

These wood veneers are only in the raw cut, The veneers back are laminated/reinforced with a black fleece. Simple processing, increased flexibility and lower risk of breakage are only three advantages of it! Raw cut/raw material means not yet 100% precisely cut side/edges.  The veneer with fleece is simply processed like any other veneer (glued, ironed, pressed ...) and comes/remains on the lower or back, veneer leaf is delivered without glue.


The veneer leaves serve only as raw material/starting material for many different applications such as for DIY projects, hobbyists, jewelry, inlays, artists, furniture parts, and all possible craftsmen, designers or creative hands and still needs to be processed and processed yourself! In general, you should always plan enough blends into your project, and you should never expect the maximum width & length specified here! The edges/sides can still be a bit frayed, or every now and then a fine hairline cracks occur at the end. The dimensions are given with minimal and maximum values. Color is black and becomes intense/darker or intensely black after treating the surface - not brownish! The photos were taken from a sheet of 63cm!

 

* Saraifo = Save the Rainforest (protect the rainforest): 
When you process this veneer, help ensure that the tropical tree stocks are relieved and protected. By buying the Saraifo products, you can contribute your very personal part! Saraifo wood veneers become very fast -growing types Ajous, Pappel, Linde). The veneers are freed from wood errors and glued/compressed/pressed in many different optimized production steps into a massive block, and then in a special method of designer veneers made of real wood.

Advantages of this veneer:

- Relief of the already endangered tropical tree species
- always available in large quantities
- Considered/reinforced with fleece (lighter handling, cutting, editing - and is much more stable)
- Natural wood surfaces/decorations
- Large areas (instead of narrow strips) up to 64-66cm wide
- simpler processing (no annoying fit)
- Time and cost savings in processing
- Almost every wood design can be realized - contact us if you want to implement new ideas
- New: now also available in different species as solid wood (Density: approx. 800-950kg/m3)


Processing instructions:
 
-All veneers are only tailored in the raw coach
 Please always keep in mind a sheet veneer is not perfectly cut or always has perfect straight edges. Furniere only serve as the starting material/raw material for countless creative work & wood projects and you should always take sufficient blends into account. If, for example, a sheet is 30cm wide, you should calculate at least 1 cm of each side.
-Sie can easily use a sharp cutter/scalpel/veneer knife with a sharp cutter/scalpel 
  Or carefully cut with scissors (smaller pieces).
-In the case of Saraifo veneer with fleece, the side with the fleece comes to the underside and stays on the veneer and is glued and pressed! All veneers are delivered on the back without glue! Our Saraifo Furniere can be processed with fleece as normal as any other veneer.
-Tror area:
   You can actually apply all veneer to any carrier material with the necessary adhesives!
  Eg all possible plates such as MDF, chipboard, ...., solid wood, boards, plastic, metal, glass, etc.) each with the necessary adhesives. 
- glue/glue:
You can use any glue: wood glue/white glue, Pattex, epoxy, bone glue, 2 components adhesives, etc. With wood glue/ponal, for example, you can either press the veneer with a plate and weight or screw clamps over the night, Or also iron out. 

With Pattex (is a contact adhesive) you can quickly apply the veneer with short application press on pressure (e.g. with a rolling pin) - this keeps bomb solid after a short time!
- ironing veneer - veneer with melting glue:
  you can easily make yourself by simply Spread the veneer and the carrier area with glue - let it dry about 15-20min (The glue will be nice and glassy) and then press the veneer with the iron under pressure.
 
-Surface treatment:
Depending on the taste, a lot of possible/usual can be used on the market:
 Clear lacquer (glossy, matt), oil, wax.
If you need further practical tips on veneer processing, beat

we for you our veneer specialist book \ "Furniere & Intarsia \" (-> also available in the shop). We partially shaped this book And is very useful for both beginners as well as for experts/carpenters/carpenters/artists!                           

Incl. VAT.
Buy immediately- Watch article Ask a Question

Furnier black colored wood veneer black saraifo 250x64-66cm

You will receive this article in the following dimensions per leaf:     

Length cm

Width cm approx.

Leaf

Strength mm approx.

 

250

+/- 64-66

1

0.45-0.50 +/-

 

This is black -colored Saraifo* veneer. This wooden veneer is pressed out of many fine real wood slats under several production processes (E1) and then processed into this flat veneer. Furniels are only available as raw material in the raw cut!

These wood veneers are only in the raw cut, The veneers back are laminated/reinforced with a black fleece. Simple processing, increased flexibility and lower risk of breakage are only three advantages of it! Raw cut/raw material means not yet 100% precisely cut side/edges.  The veneer with fleece is simply processed like any other veneer (glued, ironed, pressed ...) and comes/remains on the lower or back, veneer leaf is delivered without glue.


The veneer leaves serve only as raw material/starting material for many different applications such as for DIY projects, hobbyists, jewelry, inlays, artists, furniture parts, and all possible craftsmen, designers or creative hands and still needs to be processed and processed yourself! In general, you should always plan enough blends into your project, and you should never expect the maximum width & length specified here! The edges/sides can still be a bit frayed, or every now and then a fine hairline cracks occur at the end. The dimensions are given with minimal and maximum values. Color is black and becomes intense/darker or intensely black after treating the surface - not brownish! The photos were taken from a sheet of 63cm!

 

* Saraifo = Save the Rainforest (protect the rainforest): 
When you process this veneer, help ensure that the tropical tree stocks are relieved and protected. By buying the Saraifo products, you can contribute your very personal part! Saraifo wood veneers become very fast -growing types Ajous, Pappel, Linde). The veneers are freed from wood errors and glued/compressed/pressed in many different optimized production steps into a massive block, and then in a special method of designer veneers made of real wood.

Advantages of this veneer:

- Relief of the already endangered tropical tree species
- always available in large quantities
- Considered/reinforced with fleece (lighter handling, cutting, editing - and is much more stable)
- Natural wood surfaces/decorations
- Large areas (instead of narrow strips) up to 64-66cm wide
- simpler processing (no annoying fit)
- Time and cost savings in processing
- Almost every wood design can be realized - contact us if you want to implement new ideas
- New: now also available in different species as solid wood (Density: approx. 800-950kg/m3)


Processing instructions:
 
-All veneers are only tailored in the raw coach
 Please always keep in mind a sheet veneer is not perfectly cut or always has perfect straight edges. Furniere only serve as the starting material/raw material for countless creative work & wood projects and you should always take sufficient blends into account. If, for example, a sheet is 30cm wide, you should calculate at least 1 cm of each side.
-Sie can easily use a sharp cutter/scalpel/veneer knife with a sharp cutter/scalpel 
  Or carefully cut with scissors (smaller pieces).
-In the case of Saraifo veneer with fleece, the side with the fleece comes to the underside and stays on the veneer and is glued and pressed! All veneers are delivered on the back without glue! Our Saraifo Furniere can be processed with fleece as normal as any other veneer.
-Tror area:
   You can actually apply all veneer to any carrier material with the necessary adhesives!
  Eg all possible plates such as MDF, chipboard, ...., solid wood, boards, plastic, metal, glass, etc.) each with the necessary adhesives. 
- glue/glue:
You can use any glue: wood glue/white glue, Pattex, epoxy, bone glue, 2 components adhesives, etc. With wood glue/ponal, for example, you can either press the veneer with a plate and weight or screw clamps over the night, Or also iron out. 

With Pattex (is a contact adhesive) you can quickly apply the veneer with short application press on pressure (e.g. with a rolling pin) - this keeps bomb solid after a short time!
- ironing veneer - veneer with melting glue:
  you can easily make yourself by simply Spread the veneer and the carrier area with glue - let it dry about 15-20min (The glue will be nice and glassy) and then press the veneer with the iron under pressure.
 
-Surface treatment:
Depending on the taste, a lot of possible/usual can be used on the market:
 Clear lacquer (glossy, matt), oil, wax.
If you need further practical tips on veneer processing, beat

we for you our veneer specialist book \ "Furniere & Intarsia \" (-> also available in the shop). We partially shaped this book And is very useful for both beginners as well as for experts/carpenters/carpenters/artists!                           

Get offers conveniently by email
Subscribe to Newsletter
Left
  • Our shop
  • Seller profile
  • Reviews
  • Save shop
  • contact
payment

PayPal
Transfer
Credit card
Cash payment

Shipment

    • contact

    Do you have any questions about our offers? Contact us via the eBay contact form.

    eBay message
    The veneer leaves serve only as raw material/starting material for many different applications such as for DIY projects, hobbyists, jewelry, inlays, artists, furniture parts, and all possible craftsmen, designers or creative hands and still needs to be processed and processed yourself! In general, you should always plan enough blends into your project, and you should never expect the maximum width & length specified here! The edges/sides can still be a bit frayed, or every now and then a fine hairline cracks occur at the end. The dimensions are given with minimal and maximum values. Color is black and becomes intense/darker or intensely black after treating the surface - not brownish! The photos were taken from a sheet of 63cm! The veneer leaves serve only as raw material/starting material