Galvanised Steel Lifting Eye Bolt M6-M20 DIN 580 Male Thread Rigging Ring Anchor | SS8 Supplements
  • DIN 580 eye bolt: made to DIN 580, so the eye and thread dimensions are matched to each size
  • Lifting eye bolt working loads: axial working loads from 90kg (198lb) at M6 up to 1200kg (2646lb) at M20, so you can choose the size by the load
  • Galvanised male thread eye bolt: galvanised steel with a zinc coating for corrosion resistance; the male thread screws straight into a tapped hole or captive nut
  • M6 to M20 eye bolts: eight sizes of lifting eye bolt: M6, M8, M10, M12, M14, M16, M18 and M20, in packs of 2, 4 or 10
  • Shackle, hook and sling point: eye takes a shackle, hook, sling, rope or carabiner, for lifting and rigging points on machinery and other fixing points

Galvanised Steel Lifting Eye Bolt M6-M20 DIN 580 Male Thread Rigging Ring Anchor

Heavy duty galvanised steel lifting eye bolts to DIN 580 for hoisting and anchor points. Male thread for a tapped hole; M6 to M20, axial loads 90kg to 1200kg.

This listing covers all eight sizes, M6 to M20, in packs of 2, 4 or 10, so you can order exactly what the job needs.

✅ Suitable for: Machinery lifting points, rigging, construction tie-downs (M6-M20)

DIN 580 eye bolt

Made to DIN 580, so the eye and thread dimensions are matched to each size.

Lifting eye bolt working loads

Axial working loads from 90kg (198lb) at M6 up to 1200kg (2646lb) at M20, so you can choose the size by the load.

Galvanised male thread eye bolt

Galvanised steel with a zinc coating for corrosion resistance; the male thread screws straight into a tapped hole or captive nut.

M6 to M20 eye bolts

Eight sizes of lifting eye bolt: M6, M8, M10, M12, M14, M16, M18 and M20, in packs of 2, 4 or 10.

Shackle, hook and sling point

Eye takes a shackle, hook, sling, rope or carabiner, for lifting and rigging points on machinery and other fixing points.

Technical Specification

Our heavy duty lifting eye bolts are made to DIN 580: a galvanised steel threaded shank with a male (external) thread and a rounded eye at the top. The thread screws straight into a tapped hole or captive nut, so the eye becomes a fixed attachment point on machinery, plant, equipment, a bracket or structural steelwork, with no separate nut needed on the other side of the fixing. The eye then takes a shackle, hook, sling, rope, carabiner or turnbuckle.

The zinc coating gives corrosion resistance indoors and outdoors. Eight sizes run from M6 to M20, and each size has its own axial working load, from 90kg to 1200kg, so you can choose the bolt by the load. DIN 580 sets the eye and height dimensions for every thread size, so choosing the right bolt comes down to the thread of the hole it goes into and the load it has to take. Packs of 2, 4 or 10 cover a single fixing point or a whole run of them.

Key Features

  • Made to DIN 580, so the eye and thread dimensions are matched to each size
  • Axial working loads from 90kg (198lb) at M6 up to 1200kg (2646lb) at M20
  • Galvanised steel with a zinc coating for corrosion resistance
  • Male thread screws straight into a tapped hole or captive nut, with no separate nut needed
  • Eight thread sizes from M6 to M20, in packs of 2, 4 or 10
  • Eye takes a shackle, hook, sling, rope or carabiner

Dimensions and Working Loads

SizeEye inner (A)Eye outer (B)Height (H)Thread length (L)Working load (axial)
M616mm (0.63in)28mm (1.10in)31mm (1.22in)13mm (0.51in)90kg (198lb)
M820mm (0.79in)36mm (1.42in)36mm (1.42in)13mm (0.51in)140kg (309lb)
M1025mm (0.98in)45mm (1.77in)45mm (1.77in)17mm (0.67in)230kg (507lb)
M1230mm (1.18in)54mm (2.13in)53mm (2.09in)20.5mm (0.81in)340kg (750lb)
M1435mm (1.38in)63mm (2.48in)62mm (2.44in)20.5mm (0.81in)500kg (1102lb)
M1635mm (1.38in)63mm (2.48in)62mm (2.44in)27mm (1.06in)700kg (1543lb)
M18----930kg (2050lb)
M2040mm (1.57in)72mm (2.83in)71mm (2.80in)30mm (1.18in)1200kg (2646lb)

A = eye inner diameter, B = eye outer diameter, H = height of the eye and collar, without the thread, L = thread length.

Typical Applications

  • Machinery and equipment: a permanent lifting and carrying point, so a hook or shackle can be attached when the machine has to be moved.
  • Construction and building sites: securing beams, channels and railings, and a fixed anchor point for lines, cables, tie-downs, rope or webbing.
  • Lighting, staging and events: rigging points fixed into a tapped bracket, truss plate or beam, for lighting, staging, event and theatrical structures, and for hanging decorative items.
  • Vehicles: roof racks, sports equipment and other accessories.
  • Rope parks and climbing equipment: a connection point for gear.
  • Workshop and garage: a fixed anchor for pulling, hoisting or securing loads with chain, rope or a ratchet strap.
  • Fabrication, engineering assemblies and DIY: a standard DIN 580 eye point built into a tapped component or housing.
  • General fixing: a load-bearing eye on a threaded stud, for connecting a shackle, carabiner or turnbuckle through the eye.
  • Choosing a size: smaller sizes (M6-M10) for lighter fixing and anchor points on equipment, cabinets and fixtures; larger sizes (M12-M20) for heavier plant, machinery and structural applications where a bigger eye is needed.

Whether you are looking for an eye bolt, a lifting eye bolt, a threaded stud eye bolt or an M20 eye bolt, this is a DIN 580 lifting eye bolt with a male thread, in eight sizes from M6 to M20.

Fitting & Installation Guidance

Drill and tap the mounting point to the matching thread size and to at least the thread length in the table, then turn the bolt in by hand, or with a spanner through the eye, until the underside of the eye sits flush against the surface. Once the eye is seated flush it is ready to take a shackle, hook, sling or rope.

Working loads are for a straight, in-line (axial) pull; choose your size by the working load in the table.

You May Also Like

⏱️ Same Day Dispatch | Order by 2:00 PM, Monday to Friday
Fast UK
Delivery
60-Day
Returns