US Warehouse - FREE & FAST Shipping in USA

Norge:

7215A,7215A REV A,7215A REV B,7215A REV C,7215A REV D,7215A REV E,7215A REV F,7215A REV G,7216A,etc.

Admiral:

ADE20K3A,ADE20K3CKDA,ADE20K3CKDH,ADE20K3CKDW,ADE20K3H,ADE20K3W,ADE20K4A,ADE20K4H,ADE20K4W,ADE20L1A etc.

Crosley:

CDE20C5,CDE20C5A,CDE20C5H,CDE20C7,CDE20C7A,CDE20C7H,CDE20M6,CDE20M6A,CDE20M8,CDE20M8A,CDE20P6A,CDE20P6AC etc.

Magic Chef:

CYG1004AWW,CYG2000AWA,CYG2000AWW,CYG4000AWA,CYG4000AWS,etc

2 rear rollers

2 retaining rings,2 cylinder support shafts

4 screws, 4 spacers

EASY INSTALLATION

You must remove the drum by removing the front panel of the dryer, then gently lift the drum and remove it.

Unscrew the existing drum support wheel on the back and replace it. New drum wheels are packaged with the wheels.

The trick to getting the retaining clips on is to get them on the groove in front of the wheel shaft.

Use plyers to clamp down on the clip and shaft, and snap them into place.

Installation Tools

Putty knife, 1/4” nut driver, flat head screwdriver, 5/16” nut driver, hammer.

Tips:

Unplug the dryer before installing this part. Wear work gloves to protect your hands.Just watch the available step by step installation videos from Youtube.

Package Includes: This LA-1008 Rear Drum Support Roller Kit includes 4 screws, 4 spacers, 2 retaining rings, 2 rear rollers, and 2 cylinder support shafts. If the dryer is noisy or will not tumble, the drum support roller kit may need to be replaced

Wide Application: Compatible with No-rge, Ma-gic Ch-ef, Cros-ley, Ad-miral, Je-nn-Ai-r, Hoo-ver, Am-ana, Replaces 53-0312N, DE696, K35-251, LA-1008VP, LA1008, 3044, AP4242491, PS2162268, EAP2162268

Functions: The rear dryer drum roller functions by holding the drum in place while the drum rotates on support wheels during the drying spin/tumble cycle.LA1008 drum roller kit may need to be replaced as follows: Will not tumble, will not start, unusual noises, loud noises, takes too long to dry

Easy to Install: You must take away the drum by taking the front panel of the dryer, then gently lift the drum and take away it. Unscrew the existing drum support wheel on the back and replace it. New drum wheels are packaged with the wheels. Even if one looks good, replace both. The trick to getting the retaining clips on is to get them on the groove in front of the wheel shaft, use plyers to clamp down on the clip and shaft, and snap them into place

Why Choose Us: If you have any questions or problems about product, please let us know, we attach great importance to the buyer's shopping experience, and also provide buyers with comprehensive service, we will be happy to serve you and try to make you satisfied

Package Includes:

（As shown in the picture）

Feedback

1.Any question for your order, please contact us in time, we will reply to you within 24 hours and give you a satisfactory answer.

2.If you are satisfied with our products and services, hope to take up your a little precious time to leave feedback reviews for our products.Thanks!

3.Your satisfaction is our effort. Welcome to order again! Have a great day!

Our Policy

100% Satisfaction Guarantee

Free and Fast Shipping in USA, US Warehouse

20% of restocking fee will be charged for return item.