XADO has fundamentally revolutionized mechanical restoration with its non-invasive repair technology, eliminating the need for costly and time-consuming disassembly of engines, assemblies, and machinery. This advanced innovation enables the real-time restoration of worn parts while the equipment remains in full operation.
The Core of XADO Technology — Revitalization
At the heart of XADO lies revitalization, a scientific process that transforms the destructive energy of friction into restorative energy. This approach redefines conventional repair methods, making it possible to restore and protect metal surfaces at the atomic level.
Understanding and Reversing Metal Wear
Friction naturally causes microscopic scratches and defects on metal surfaces—these are the high-activity zones where wear accumulates and deteriorates under load.
XADO Revitalizant precisely targets these high-stress areas. By utilizing the energy generated by friction, it triggers the formation of a durable ceramic-metal (cermet) layer that actively rebuilds worn surfaces. The specialized formula contains:
Building elements essential for new metal formation.
An energetic activator that channels excess frictional energy into the creation of a new crystal lattice, forming a stronger surface structure.
The process begins automatically in zones of the most intense wear, where frictional energy is greatest and metal atoms have the most unbound electrons. These “active” bonds attract revitalizant particles like magnets, pulling them directly to the worn zones. As the new structure forms, the energetic processes subside, leaving a smooth, dense protective layer that fully integrates with the base metal. Within minutes, the damaged area is repaired and covered by a new cermet surface, resulting in a restored, more durable part that resists further wear.
How Surface Growth Self-Regulates (Self-Limiting Mechanism)
Microscopically, even the smoothest metal surfaces are uneven, covered with peaks and troughs. Wear occurs as the peaks vanish. XADO’s revitalization process is designed to stop automatically when the surface reaches its original, designated geometry. Once the peaks and hollows align and frictional activity subsides, the restorative reaction ceases. The unused revitalizant remains dormant, ready to activate again only when new wear zones appear.
This self-limiting mechanism is critical, ensuring that parts are restored exactly to their original dimensions—never beyond—thereby preserving precise tolerances and operational stability.
Reinforced Revitalizant for Hydraulic Systems
XADO Reinforced Revitalizant is specifically designed to protect, restore, and extend the life of power steering systems and other hydraulic equipment. Containing 20% more active ingredients than standard revitalizants, it offers exceptional wear protection and recovery potential.
During treatment, it forms a metal-ceramic coating on friction surfaces, including valve spindles, tilting mechanisms, and actuators. This protective layer effectively restores original operating parameters, reduces friction, and enhances the overall reliability of the hydraulic unit.
Application Instructions (Hydraulic Systems 1–2 L Capacity):
Warm up the hydraulic fluid to its operating temperature.
Introduce the contents of one tube (or can) into the power steering pump tank.
Start the engine, let it idle for 2–3 minutes, then turn the steering wheel side-to-side for about 5 minutes to circulate the fluid thoroughly.
Completion: The revitalization process is complete after approximately 50 hours of operation (or about 950 miles).
Pro Tip: For best results, pre-dissolve the contents in about 50 ml of used hydraulic fluid before pouring. If the system fluid is dirty or discolored, replace it before starting the treatment.
Dosage:
Oil system capacity: 1-2 L
Number of syringes (8 ml): 1
Treatment procedure: single
Oil system capacity: 2-5 L
Number of syringes (8 ml): 2
Treatment procedure: single
Oil system capacity: 5-8 L
Number of syringes (8 ml): 3
Treatment procedure: single
Note:
A clear indication of the initiation of the revitalization process is the noticeable improvement in the operation of the steering mechanism (reduced steering effort, enhanced precision, reduced noise) from the very first kilometers of operation. If no improvements are observed in power steering operations after 60-120 miles of operation, it is likely that there was an inaccurate diagnosis.