• Wifi Connection: Video recording and video sharing functions can be achieved by connecting smart devices with the camera's WiFi
• Electronic Rearview Mirror: Seeing through the end of the device in real-time after you have entered the video of the rearview, you can see in real-time. Look at the reason behind the vehicle and the overall perspective
• Forward-Looking Function: It can be installed in the front, rear left, and right viewing area and the software can be opened for real-time monitoring
• Reserve Video Recording: Every time the mobile phone is switched on and the app or apk is undone, the video can be saved on the smartphone. The five-cycle coverage when recording your lane each time you reverse the vehicle can be minus your risks.
• Smart Start Background, Start Voice Call: Android background system can monitor the trigger signal, automatic start, no manual input. Apple Voice Call Start system, static IP connection to reach online and vice versa at the same time
• Low Bit Rate Video Coding Technology: the picture is clear and smooth with no delay.
• Hanging design with high definition lens. Applicable to a variety of DC12V vehicles: car, mini-truck, mini-van, etc.


• Note:
  • Installation:
  • 1. First, turn off the on-board power supply. When the power cord of the camera is not properly connected, do not power on it.
  • 2.Determine the type of camera and select the installation position method.
  • Rearview product installation method:
  • Methods 1:Red power cord fuse box ACC power supply 12V+ positive position, black power cord fuse box negative GND wire harness, start the vehicle to use.
  • Side view product installation method:
  • Methods 1: Connect the power cord adjust the camera Angle, plug in the cigarette lighter and press the switch.
  • Method 2; Cut open the cigarette lighter switch position of the wire, red and black two-wire. The red power cord is connected to the ACC power supply 12V+ positive position of the vehicle fuse box. The black power cord is connected to the negative GND wire harness of the vehicle, which can be used when starting the vehicle.
  • Troubleshooting:
  • 1. No image
  • Make sure the camera Is connected correctly open the WIFI list on your phone, and see if you can find theW-Car hotspot generated by the camera.
  • 2. Background operation
  • You need to turn on the phone Settings and set it to run in the background.
  • 3. Video delays
  • Check if the antenna is shielded by metal and the antenna faces the cockpit.
  
  
  • Product Specification

    Type	WIFI Car Rear Camera
    Transmission	Wifi digital signal
    Video Compression	H.264
    Signal Strength	20M
    Operating Temperature	-20 + ~ + 70 ℃
    Storage Temperature	-30 + ~ + 80
    Working Humidity	80% RH
    Receiver	For IOS or Android devices
    Sensor	CCD
    Image Pixels	megapixels
    Viewing Angle	120 ° ~ 175 °
    Minimum Lighting	0.1Lu / F2.0
    Power Supply	DC12V
    Night Vision Distance	5-10M
    Waterproof Level	IP67
    Fixed Type	License plate light fixed

    
    Package Included
    • 1x WIFI Car Rear Camera
    • 1x User Manual
    • 1x Power Cable
    • 1x Double-Sided Adhesive Tape