🚗 DJI 65W Car Charger – Fast, Versatile On‑the‑Go Power for DJI Devices & More

---

✅ Compatible Products

• DJI Neo 2

• DJI Mini 5 Pro

• DJI Mavic 4 Pro

• DJI Mavic 3 Pro

• DJI Mavic 3 Pro Cine

• DJI Mavic 3 Classic

• DJI Mavic 3

• DJI Mavic 3 Cine

• DJI Air 3S

• DJI Air 3

• DJI Flip

• DJI Avata 2

• DJI Avata

• DJI Neo

• DJI Goggles 2

---

📦 Package Contents

• 1 × DJI 65W Car Charger

• 1 × Dual USB‑C Cable

---

🔍 Overview

Stay powered wherever you drive with the DJI 65W Car Charger — a practical and efficient in‑vehicle accessory. Engineered for reliability, it provides stable 65 W output through its USB‑C port, allowing you to charge DJI Intelligent Flight Batteries and remote controllers on the road. With support for PPS (Programmable Power Supply) and PD (Power Delivery) protocols, it’s also fully compatible with a variety of third‑party devices such as smartphones, laptops, and tablets, making it a versatile solution for all your mobile charging needs.

Key Benefits:

• Charge multiple DJI devices quickly while traveling.

• Universal USB‑C + USB‑A ports cover most charging requirements.

• Fast charging with PPS/PD support for non‑DJI electronics.

• Compact car‑friendly design fits standard 12 V sockets (cigarette lighter).

---

✨ Highlights

• Universal Interface – Easy to use with USB‑C and USB‑A ports for broad device compatibility.

• High‑Power Output – 65 W maximum for rapid charging of large batteries and devices.

• Multi‑Protocol Support – PPS and PD ensure optimized charging speeds across brands.

• Dual‑Port Convenience – Simultaneously charge two devices without significant loss in speed.

---

⚙️ Technical Specifications

• Input Voltage: 12.7 V to 16 V, 6.5 A (standard car power socket)

• DC Output – USB‑C Port:

• 5 V / 5 A

• 9 V / 5 A

• 12 V / 5 A

• 15 V / 4.3 A

• 20 V / 3.25 A

• 5 V to 20 V / 3.25 A (PPS range)

• DC Output – USB‑A Port: 5 V / 2 A

• Operating Ambient Temperature: 5 °C to 40 °C

---

⏱️ Charging Time*

(When both charging ports are used at the same time, charging time may increase slightly—please allow extra time. All times measured in a controlled lab environment and provided for reference only.)

• DJI Mavic 3 Intelligent Flight Battery: Approx. 1 hour 36 minutes

• DJI RC N1 Remote Controller: Approx. 2 hours 40 minutes

• DJI RC Remote Controller: Approx. 2 hours

• DJI RC Pro Remote Controller: Approx. 2 hours

• DJI Avata Intelligent Flight Battery: Approx. 47 minutes

• DJI Goggles 2 Battery: Approx. 1 hour 50 minutes

These estimates help you plan charging stops during long trips or intensive shooting days.

---

💡 Usage Tips

1. Plug into a Stable Power Source – Ensure your vehicle’s 12 V socket delivers steady voltage within the specified input range.

1. Use Quality Cables – The included dual USB‑C cable is optimized for high‑power transfer; avoid thin or damaged cables that can reduce charging speed.

1. Temperature Awareness – Do not operate the charger in extreme heat (> 40 °C) or cold (< 5 °C) to protect internal components.

1. Simultaneous Charging – You can charge two devices at once, but total current will be shared; prioritize larger batteries when time is limited.

1. Device Compatibility Check – Verify that your device supports PPS or PD for fastest charging; otherwise, it will default to standard USB charging rates.

---

⚠️ Important Notes

• Voltage Limits – Input must stay between 12.7 V and 16 V; voltage outside this range may damage the charger or connected devices.

• Current Draw – At maximum load (6.5 A), ensure your car’s electrical system can handle the demand without affecting other accessories.

• Lab Measurements – Charging times are based on ideal lab conditions; real‑world times may vary with temperature, cable quality, and battery state.

• Accessory Only – This charger is intended for use with DJI batteries, remotes, and certified electronics; using with incompatible devices may result in slower charging or potential safety risks.