Why buy from us?
✅ 1. Trusted Seller
We have been running an honest business on eBay for over 10 years, with more than 1,500 sales every month. You never have to worry about scams when shopping with us!
🎯 2. Brand New and Lowest Price
We have our own factory, our products are brand new and unused, and our prices are the lowest.
🚀 3. Fast & Hassle-Free Shipping
Shipping from the US warehouse, delivery can take 2-7 days.
🛒 Buy with confidence and experience a smooth, worry-free shopping experience!
- [High-efficiency Filtration] :Replacement for PF-2 fluoride filters effectively reduce fluoride and arsenic, absorb odor, color, residual chlorine, heavy metals, they also reduce sediments and large particles effective in improving taste
- [Fluoride and Arsenic Filter]:The white fluoride filter for pf-2 replacement is made of natural mineral synthesis material Carbonate Apatite as the filter medium. Efficient absorption of 99% residual chlorine and fluoride
- [Compatible with Berkey]: Replacement for pf-2 fluoride and arsenic filter, compatible with Big, Travel, Royal, Imperial, Crown, Light series gravity filtration system, has the same powerful purification capacity as the original brand
- [Durable Life Span]: For best performance, replace the white fluoride filter every 1,000 gallons based on water conditions. Note that TDS levels do not fully indicate water quality and our filters do not reduce TDS values!
How to Prime Replacement for PF-2 White Fluoride Filters with Priming Button
- Priming with the thick tan washer, known as the priming button is the original method for priming Fluoride Filters. A priming button is included with every Fluoride Filter purchase.
- 1. With the blue caps in place wash the exterior of each fluoride filter element with water and mild dishwashing soap, then rinse.
- 2. With clean hands, remove both blue caps from each end of both filter element.
- 3. Place the rubber priming button (tan colored) onto one end of a fluoride filter and align the hole of the filter with the hole of the rubber washer.
- 4. Press the priming button up against the sink faucet so that the priming button creates a seal between the faucet and the Fluoride Filter. Place your thumb on top of the faucet to apply pressure, to create a better seal (as seen in picture).
- 5. While holding the priming button against the faucet, turn on the cold water slowly, allowing water to fill the cavity of the filter and flow from the opposite end. 6. Allow water to flow for at least 30 seconds or until water runs clear.
- 7. Turn the Fluoride filter over and prime the opposite end (reversing the flow of water) repeating steps 3-5 until water runs clear from both directions.
- 8. To determine if the filter is fully primed, collect the filtered water in a clear glass and hold it up to the light to see if all of the cloudiness is gone from the water, if not continue priming until water is clear.
- 9. This filter is now primed and ready to install.
- 10. Repeat priming steps 1-7 for each additional Fluoride Filter.
