AUXITO Y13 Series Mini Sized LED Light Bulbs, Pack of 2
360° illumination: Ultra-thin board design effectively simulates halogen lamp’s beam pattern and solves the problem of focusing unevenly or dark area problems.
Mini lamp size: Almost 1:1 same size like halogen bulbs, non-polarity plugs, perfectly fit into your original headlight housing, no modification or damages on lihyhousing or cover.
High compatibility: Upgraded can-bus error free design and 36W/bulb high rated power making these AUXITO Y13 series led bulbs compatible with 99% of vehicles without error warnings or radio interference.
Long Lifespan: Whole aviation aluminum body, the built-in smart temperature control IC, powerful cooling fan and the special copper board ensure the led lamp lasting up to 50,000 hours
Super Focused and High Light Output
Provide a wider and farther visible range. Clear cut-off line avoids blinding to oncoming drivers, keep you and other drivers away from danger in the dark
360° Adjustable Beam
With the included L-shaped tool, convenient to make simple locker ring angle adjustments to get the expected beam pattern. No adjustments needed for most vehicles.
IP67 Waterproof
Waterproof and dustproof design allow the Y13 series led light bulbs keep working even under extreme conditions
Independent Intelligent Driver
Why do we design these Y13 series led bulbs with independent driver? We aim to keep the electronic components away from the heat source for longer service time. The built-in smart IC ensures the best temperature protection and lighting performance.
About this item:
Y13 Series LED Light Bulbs: Run on DC 12V-24V, 36W and 8,000lm per bulb, 6500k white, super focused and stable light output, 500% brighter than stock bulbs
Same Beam Pattern Like Stock One: 0.079in ultra thin copper board for 360° illumination, helps you see wider and farther, no blinding to oncoming traffic, don’t dazzle other drivers
Mini Sized Lamp Body: These non-polarity LED light bulbs are sized to fit your housing perfectly and can be plugged directly into your original factory sockets, no more modification on housing or cover
Can-bus Ready Design: Making Y13 series LED bulb compatible with 99% of vehicles’ system, upgraded driver with built-in intelligent IC and temperature control ensures lamps working at the best status without error or radio interference
Efficient Cooling System: Whole aviation aluminum body and 12,000RPM cooling fan provide super cooling ability, which ensures a longer lasting up to 50,000 hours
Parameter:
Model: Common for 9005/9006/9007/9012/H1/H4/H7/H8/H11/H11B/H13 LED Headlamps (Please confirm the size you need before purchasing, if you're not sure which size is for your car, please contact us, we will help you with it.)
Voltage: DC12V-24V
Power: 36W/bulb, 72W/pair
Lumens: 8000lm/bulb, 16000lm/pair
Light source: LMP
Color Temperature: 6500K super white
IP Rate: IP67 waterproof
Beam Angle: 360°
Operating Life: >50000hrs
Operating Temperature: -40 - +80°C
Application: High Beam Head Lights
Applicable: led headlight bulb, not recommended for fog lights
Product Positioning:
1) This model is a fan model, the light type is closer to the original car halogen lamp, and the paving effect is good.
2) This brightness will be higher than the brightness without fan
Package include:
1 pair bulbs (Plug size is as selected)
Attention:
LED bulb is low power device, the following issues may occur if you want to use LED bulb on some Vehicles: Hyper Flashing, No Flashing, or Error Code. Those are NOT problems of LED bulb and NOT covered by warranty. You may simply add a set of load resistor (NOT included) to avoid those issues.can be solved with a decoder (decoder must be purchased separately)
Install Caution:
1. As a safety precaution, make sure that the car has had time to cool down properly before starting the installation process.
2. Put the vehicle into park or make sure it is securely in gear.
3. Make sure to have the ignition turned off and the keys removed.
4. Be careful to avoid burns, especially when turning on or off the vehicles lighting.
5. Be careful to avoid crushing or cutting the bulbs. Also make sure to not touch the bulbs with your fingers, as this will cause blotting.
6. Fully examine the connection of the contact points, ports and the wires as faulty connections can cause lighting problems.
7. Make certain that the end of the bulb does not come in contact with the interior light shield of the headlight when adjusting the bulb.
