JET RF Remote Control for Dust Collectors, 1Ph 230V (DC-RC230) *MISSING REMOTE*

**MISSING REMOTE** Seller Notes: New without Box item but selling as For parts or not working due to missing remote that comes with it. Also I can't test this unit due to not having remote and I also don't think I got this type of outlet around that I can test with, so selling this as is. Based on condition of this item, I do think this should work but can't say for sure. Perfect for replacement on your old unit OR if you have remote laying around for this unit. I did some research online, looks like you can pair remote with this unit easily, see the steps for the same in description.

Instructions:-

Pairing a new JET RF remote control

To pair a new JET RF remote control for your dust collector, follow these steps: 
  • Ensure both the dust collector and the remote control unit are in the "off" position before connecting to the power source.
  • Turn on the dust collector.
  • Set the main unit's switch to the "ON" position. The red LED on the main unit should illuminate.
  • Press the button on the remote control transmitter. 
  • Your remote control should now be paired and ready to operate the dust collector. 
Troubleshooting

  • Check for interference: Ensure there are no objects blocking the signal between the remote and the receiver.
  • Reset the unit: Try unplugging the dust collector for a few minutes and then cleaning the sensor before repeating the pairing process.
  • Check the RF light: If the RF light on the remote is constantly on, it indicates interference. Try moving the remote or the dust collector to a different location where the light is off when no buttons are pressed. 
If the issue persists, consider contacting JET Tools support for further assistance. 
..!