Details
Specifications
Input
Voltage: 110V AC
Frequency: 47- 440Hz
Max. Current: 3A
Output
Power: 100W / 150W
Max. Voltage: 28kV / 34kV
Max. Current: 30mA DC / 380mA DC
Efficiency: 91%
Mean Time Between Failure (MTBF): ≥30000 hr.
Cooling System: Forced-Air Cooling (FAC)
Response Time: ≤1 millisecond
Voltage Range
High-Level: ≥3V
Low-Level: ≤0.7V
Operating Environment: -22 to 149°F ( -30 to 65°C)
Temperature Testing: Tested to Operate at Full Load for 12 hours at 140°F (60°C)
Start/Stop Test: Turned on and off 500 times in 7 seconds
Features
Intuitive Control
This power supply uses simple TTL-level signals to control your laser's output.
Variable Laser Power
You can also use 0-5V analog signals and PWM signals to adjust your laser's power.
LCD Display
The built-in LCD display shows current output amperage as well as the status of your machine's water protection system and laser signal.
Wide Compatibility
Our retrofit replacement power supply for CO2, laser engravers and cutters is compatible with laser tubes up to 100W from various manufacturers.
Open-Circuit Protection
A protection circuit combined with a well-grounded enclosure ensure our power supply properly handles open-circuit faults and provides you an improved life span.
Variable Voltage Level
Our 100W / 150W power supply uses TTL-level signals to control both active-high and active-low devices.
-Please leave us your full name, your telephone number and detailed address when ordering.
-We ship to your eBay or Paypal address. Please make sure your eBay and Paypal address is correct before you pay the order.
-We try our best to pack the products as good and safe as possible ,so they always arrive in a good condition.
-We accept PayPal only.
-All major credit cards are accepted through secure payment processor PayPal.
-Payment must be received within 4 business days of auction closing.
-We offer sophisticated products at a high technological level, with the highest possible quality and the most favorable price.
-With these parts you can replace your defective parts simply plug and play.
-Our warranty is valid for max. 24 months without mileage limitation.
-Please compare carefully with Photos or OE number before purchasing the part.
-Once a problem occurs with the purchased product, please do not hesitate to let us know with Ebay messages,we will offer you refund or replacement.
Specifications
Input
Voltage: 110V AC
Frequency: 47- 440Hz
Max. Current: 3A
Output
Power: 100W / 150W
Max. Voltage: 28kV / 34kV
Max. Current: 30mA DC / 380mA DC
Efficiency: 91%
Mean Time Between Failure (MTBF): ≥30000 hr.
Cooling System: Forced-Air Cooling (FAC)
Response Time: ≤1 millisecond
Voltage Range
High-Level: ≥3V
Low-Level: ≤0.7V
Operating Environment: -22 to 149°F ( -30 to 65°C)
Temperature Testing: Tested to Operate at Full Load for 12 hours at 140°F (60°C)
Start/Stop Test: Turned on and off 500 times in 7 seconds
Features
Intuitive Control
This power supply uses simple TTL-level signals to control your laser's output.
Variable Laser Power
You can also use 0-5V analog signals and PWM signals to adjust your laser's power.
LCD Display
The built-in LCD display shows current output amperage as well as the status of your machine's water protection system and laser signal.
Wide Compatibility
Our retrofit replacement power supply for CO2, laser engravers and cutters is compatible with laser tubes up to 100W from various manufacturers.
Open-Circuit Protection
A protection circuit combined with a well-grounded enclosure ensure our power supply properly handles open-circuit faults and provides you an improved life span.
Variable Voltage Level
Our 100W / 150W power supply uses TTL-level signals to control both active-high and active-low devices.
-We accept PayPal only.
-All major credit cards are accepted through secure payment processor PayPal.
-Payment must be received within 4 business days of auction closing.
-Please leave us your full name, your telephone number and detailed address when ordering.
-We ship to your eBay or Paypal address. Please make sure your eBay and Paypal address is correct before you pay the order.
-We try our best to pack the products as good and safe as possible ,so they always arrive in a good condition.
-We offer sophisticated products at a high technological level, with the highest possible quality and the most favorable price.
-With these parts you can replace your defective parts simply plug and play.
-Our warranty is valid for max. 24 months without mileage limitation.
-Please compare carefully with Photos or OE number before purchasing the part.
-Once a problem occurs with the purchased product, please do not hesitate to let us know with Ebay messages,we will offer you refund or replacement.
On Nov 23, 2025 at 17:49:40 PST, seller added the following information: