Straight-Single-5.5inch

Feature
100% Brand New and High Quality
Gently curved exhaust pipe, anti-corrosive, corrosion resistance, durable
Simple installation, no need of drilling or welding
Simply fits over the existing tail pipe
Universal tail throat, suitable for most models with exhaust pipe diameter within 1.5 - 2.1inch(38-54mm). You can choose according to the exhaust pipe of the vehicle.
If the exhaust pipe is straight, you can choose a straight type. If the exhaust pipe is curved,you can choose the type of bend. Pls confirm the size before you purchase.
The Product of exhaust pipe is curved. If you want to choose the type of straight, you can click Here.
Note:
The distance between the tail pipe and the bumper should be above 2cm to avoid scalding by hot exhaust bumper.
Wear gloves to install, just in case injury.
In the car just stopped or started, please do not install this product, to avoid being scalded
Specifications:
Color: Silver+Blue
Material: Stainless Steel
Diameter: 2.5 in (64mm)
Length: 5.7"(145mm)
Suitable For car exhaust pipe diameter Less than 58mm(2.3")
Package includes:
1 * Car Exhaust Tail Pipe
Straight-1T2

Size:
Total length: 6.5"
Size: As picture shows
Color: bright silver + blue
Applicable models: universal
Material: Polished Stainless Steel
Fit for 1.4-2.5" inlet.
Feature:
-Made of high quality stainless steel, exquisite workmanship, no fading, no rust; High temperature bluing, three-color natural gradient, not rigid, dynamic; beautiful and durable; Protect the original car exhaust pipe.
-Double bolt fastening, double secure
-Good finish edge, protect your hand and paint
-Drain hole is reserved, avoid extra water and protect the tail pipe.
-High-quality installation buckle design, easy installation and can firmly hold the original car exhaust pipe, not easy to fall off.
Package Included:
1 x Dual Exhaust Pipes
Warm Tips:
1. The distance between the pipe and the bumper should be more than 2cm, so that the high temperature produced by the pipe will not burn the bumper.
2. Wear gloves to avoid hurt when installing.
3. Do not install this product when the car has just stopped or started to avoid being burned by the exhaust pipe
4.Please allow minor deviation due to manual measurement.
5.Due to the difference between different monitors, the picture may not reflect the actual color of the item. Thank you!your kind understanding will be much appreciated.
Straight-Single-8.5inch

Specifications:
Material: stainless steel
Color: Silver+blue
Type:Single wall, Straight Cut
Fit for: the outer diameter model with 1.5-2.4inch
Features:
*Simple installation
Easy installation with a direct replacement, other modifications like welding or punch are not required. You can fix the screw with a wrench in the appropriate position of the exhaust pipe.
*Polished surface
The exhaust tip with exquisite workmanship and shiny appearance increases the style of sports effect for the car.
*Superior quality
High-quality stainless steel material with surface polishing treatment is not easy to rust and
deformation.
*Special design
The small drainage hole design can prevent water accumulation.
*Installation steps:
1.Clean the tailpipe surface
2.Putting the exhaust tip on
3.Fasten the exhaust tip
*Note:
1.Please measure the outside diameter of your exhaust pipe before purchase, otherwise our product will not fit your car. This tips fit only 1.5 - 2.4 inch outlet tailpipe
2.Please check your original tailpipe's type. Straight tailpipe is for straight type, and curved tailpipe is for curved type.
Packaging include:
Exhaust Tip*1
Bend-Single

Product description
- 100% Brand New and High Quality
- Gently curved exhaust pipe, anti-corrosive, corrosion resistance, durable
- Simple installation, no need of drilling or welding
- Simply fits over the existing tail pipe
- Fits pipes diameter Less than 58mm(2.3in) , pls confirm the size before you purchase.
Note :
- The distance between the tail pipe and the bumper should be above 2cm to avoid scalding by hot exhaust bumper.
- Wear gloves to install, just in case injury.
- In the car just stopped or started, please do not install this product, to avoid being scalded
Specifications:
Package includes:
1 * Car Exhaust Tail Pipe
Bend-1T2

Product Description:
Name: Blue Burnt Dual Exhaust Pipes
Material: Polished Stainless Steel
Size:
Total length: 16cm
Inner diameter: 6.5cm
Outer diameter: 12.6cm
Color: bright silver + blue
Applicable models: universal
Feature:
-Made of high quality stainless steel, exquisite workmanship, no fading, no rust; High temperature bluing, three-color natural gradient, not rigid, dynamic; beautiful and durable; Protect the original car exhaust pipe.
-Double bolt fastening, double secure
-Good finish edge, protect your hand and paint
-Drain hole is reserved, avoid extra water and protect the tail pipe.
-High-quality installation buckle design, easy installation and can firmly hold the original car exhaust pipe, not easy to fall off.
Package Included:
1 x Dual Exhaust Pipes