90 Degrees /metal Bending Machine Sheet Metal Bender Fit 0.01-0.04in Sheet Metal

Application

This product can be used to make 0.01-0.04-inch sheet metal for 0-90° bending angles. The recommended fold height is 1/2-5 inches. It is suitable for bending straight bends of an infinite length up to the very ends of a straight panel length. It can be used for kiosks, garage rain deflectors, roof rain covers, and more!

How to Use

  • Lock the lift plate to the shaft leg at the desired bend height to accurately align all drum depths.
  • Grasp the tool by the handle and slide it onto the edge of the material. Ensure that the material fits snugly against the bottom of the tool V-shaped roller assembly.
  • Gradually apply bending pressure while rolling the tool along the edge of the material. Each time bend the material upwards by approximately 10-20 degrees. For a 90-degree bend, you should plan to have the tool run back and forth at least 5 to 8 times.
  • Allow the outer set of rollers to slide off the bend as you reach the end of the material and then reverse direction. This will produce a more uniform bend.

Specification

Color: Blue

Style: Modern

Type: Lightweight Version

Material: Iron, Aluminum

Bending Angle: 0-90°

Applicable Sheet Metal Thickness: 0.3-1.0mm/0.01-0.04in

Suggested Folding Height: 13-130mm/ 1/2-5in

Product Size: 19.2*7.1*25cm/7.56*2.8*9.84in

Shears Length: 20.8cm/8.19in

Package Size: 30*24.5*11cm/11.81*9.65*4.33in

Gross Weight: 2.74kg/6.04lbs

Net Weight: 2.5kg/5.51lbs

Package Included

1* Metal Bending Tool

1* Sheet Metal Shears

Notes

Please allow the slight color difference caused by the shooting light and 1-3cm error due to manual measurement, and make sure you do not mind before ordering.

 
We accept ebay payment 。
Fees such as import duties, taxes are not included in the item price or shipping costs. These charges are the buyer's responsibility.
Shipping:
 
2-9 working days to: USA
 
    •  
    • We maintain high standards of excellence and strive for hundred percent customer satisfaction. Feedback is very important to us. We hope that you contact us immediately before you give neutral or negative feedback, so that we can address your concerns. It is impossible to address issues if we do not know about them!
 
  •  
Your satisfaction is our ultimate goal. We work hard to earn your trust and future business. Our certified technicians have tested each item before shipping. The unit comes with 1 year limited warranty on all manufacturing defects.
a) If you receive a defective item, you may return it or ask for a discount. Please contact us within 14 days after you receive the package.
b) What you returned must be intact and in its original packaging as re? u. Customer is responsible for shipping costs of the returned item.
c) We will cover the cost of shipping back t with the shipping rate indicated in the registration page. We will send you a new unit or refund the full payment you paid.
Thank you.
Business Hour
Business Hour: Monday To Friday: 8:30 AM to 5:00 PM (Beijing China time)
Due to time zones, our reply to your questions may not be immediately. But within above working time, we will reply your email within 24 hours. If it's non-workdays, please kindly be patient and wait till Monday.
Please contact us with ebay message.
Please feel free to contact us if you have any questions.
Monday To Friday: 8:30 AM to 5:00 PM (Beijing China time)
Due to time zones, our reply to your questions may not be immediately. But within above working time, we will reply your email within 24 hours. If it's non-workdays, please kindly be patient and wait till Monday.
Please contact us with ebay message.
Please feel free to contact us if you have any questions.
PushAuction

On Nov 18, 2025 at 23:44:29 PST, seller added the following information:

Datacaciques