XADO 1 Stage Maximum Atomic Metal Conditioner (RF100): Single-Treatment Engine OverhaulThe XADO 1 Stage Maximum Atomic Metal Conditioner is a revolutionary, three-stage engine additive that provides a complete revitalization and protection cycle for your engine with just one simple treatment. Formulated with 100% Revitalizant (RF100), this advanced product restores performance and dramatically extends engine life.Even well-maintained engines suffer wear from continuous high heat and friction.

 XADO Maximum Atomic Metal Conditioner utilizes proprietary nano-technology and 20 years of innovative research to address this: it rebuilds worn engine metal atom-by-atom and applies a durable, self-regulating ceramic-metal layer at all friction points to prevent future wear.

 This targeted approach ensures that only high-friction areas like pistons, crankshafts, and camshafts are treated, leaving non-friction areas unaffected.

 Key Performance & Protection Benefits:Metal Repair: Rebuilds worn engine metal surfaces atom-by-atom and reverses existing metal wear.

Long-Term Shield: Coats friction points with a durable, ceramic-metal layer for long-lasting protection (up to 62,000–100,000 miles).

Power & Response: Improves engine power, increases horsepower, and boosts acceleration response.

Restoration: Restores engine compression and lost oil pressure to optimal values.

Efficiency: Reduces fuel consumption by significantly improving engine efficiency.

NVH & Emissions: Decreases engine noise and vibration and reduces toxic emissions (carbon monoxide & dioxide).

Protection: Protects metal parts from overheating and overloading and enhances oil lubrication characteristics.

Lifespan: Increases the engine's operational life by up to 3 times.

General Characteristics of the Cermet Layer:Microhardness: $750 \text{ kg/mm}^2$.Corrosion Resistance: High.Surface Roughness ($R_a$): Ultra-low, down to $0.06 \text{ µm}$.

 Single-Step Application Instructions:Warm Up: Run the engine until it reaches its normal operating temperature.Prepare: Turn off the vehicle, then shake the bottle vigorously for 1 minute to ensure the contents are fully suspended.

Apply: Pour the entire contents of the bottle into the engine oil reservoir (oil filler cap).

Circulate: Start the engine and let it idle for 5–10 minutes to thoroughly circulate the product.Drive: Drive as usual—no changes to driving habits are required.

 Important Notes & Compatibility:Revitalization Cycle: The complete Revitalization cycle requires 600 to 900 miles of driving to finish.

 Do not change the engine oil during this period.Oil Capacity: One bottle treats engine oil capacities up to 5 quarts (approx.14 4.7 liters). Larger engines may require a second treatment.

Compatibility: Suitable for all motor oil types (synthetic, semi-synthetic, mineral) and all engine types (gasoline, diesel, natural gas, 4-stroke motorcycles), including turbocharged and supercharged.

The granules dissolve completely in warm motor oil and will not alter oil viscosity or cause caking.

Duration: One treatment provides long-lasting wear protection for up to 62,000–100,000 miles.Maintenance: Repeated application is only recommended after 62,000 miles. For maximum ongoing protection, consider using XADO Atomic Oil or XADO HighWay Metal Conditioner (RF5.5) in future oil changes.