Specifications:
Product name: COB double tip
Sealed: high temperature, corrosion resistance;
Security: 12V safe voltage, double insulation;
Life span: life of the light source is 50 thousand hours;
Easy installation: direct replacement of the original car lamp
Description:
Chip type: COB
Suitable voltage: 12V
Number of lamp beads: 12SMD
Color temperature: 6000K
Luminous flux: 150LM
Socket type: 31MM
Material: aluminum
Note:
1. Please turn the light bulb horizontally if it does not light up with the + and - polarity.
2.These bulbs are slightly wider than the original bulbs. Make sure there is enough space in the body of your car to install it
3.With decoding
Package Includes
2x white LED's to replace the standard bulbs
Installation：
Plug and play, remove your old bulbs and then insert the LED's. If they do not light up or flicker then this is due to the polarity, rotate the LED 180 degrees then re-install.
Compatibility：
please check your vehicles existing bulbs before purchase.
CAN-bus Information：
These LED's have built in CAN-bus load resistors. However some newer vehicles are more sensitive than others and may still show an error. Such vehicles will require additional resistors to be installed.
If the product is not suitable or there is a quality problem, please contact our customer service directly to solve the problem, we will give you a satisfactory solution.
Product name: COB double tip
Sealed: high temperature, corrosion resistance;
Security: 12V safe voltage, double insulation;
Life span: life of the light source is 50 thousand hours;
Easy installation: direct replacement of the original car lamp
Description:
Chip type: COB
Suitable voltage: 12V
Number of lamp beads: 12SMD
Color temperature: 6000K
Luminous flux: 150LM
Socket type: 31MM
Material: aluminum
Note:
1. Please turn the light bulb horizontally if it does not light up with the + and - polarity.
2.These bulbs are slightly wider than the original bulbs. Make sure there is enough space in the body of your car to install it
3.With decoding
Package Includes
2x white LED's to replace the standard bulbs
Installation：
Plug and play, remove your old bulbs and then insert the LED's. If they do not light up or flicker then this is due to the polarity, rotate the LED 180 degrees then re-install.
Compatibility：
please check your vehicles existing bulbs before purchase.
CAN-bus Information：
These LED's have built in CAN-bus load resistors. However some newer vehicles are more sensitive than others and may still show an error. Such vehicles will require additional resistors to be installed.
If the product is not suitable or there is a quality problem, please contact our customer service directly to solve the problem, we will give you a satisfactory solution.