Specification:
Model: 4" foglight 30w
Product Name: LED Fog Light
Voltage: 9-32V
Out power: 30W
Current : 1.32A
Luminous flux: 6000lm
Waterproof: IP67
Lens Material : PC
Housing Material: Aluminum
Light Color: White,Amber
Bulb Type: LED
Placement on Vehicle: Front
Diameter: 4"/ 10.16CM
Boxes size: 21x14x11cm
Safety Standard Certification: DOT, SAE,E9
Qty: 2pcs
Model: 4" foglight 30w
Product Name: LED Fog Light
Voltage: 9-32V
Out power: 30W
Current : 1.32A
Luminous flux: 6000lm
Waterproof: IP67
Lens Material : PC
Housing Material: Aluminum
Light Color: White,Amber
Bulb Type: LED
Placement on Vehicle: Front
Diameter: 4"/ 10.16CM
Boxes size: 21x14x11cm
Safety Standard Certification: DOT, SAE,E9
Qty: 2pcs
Package Included:
2pcs x Fog Light (1Pair)
2pcs x Fog Light (1Pair)
Install Caution:
1. As a safety precaution, make sure that the car has had time to cool down properly before starting the installation process.
2. Put the vehicle into park or make sure it is securely in gear.
3. Be sure to turn off the ignition and remove the key.
4. Be careful to avoid burns, especially when turning on or off the vehicles lighting.
5. Be careful to avoid crushing or cutting the bulbs. Also make sure to not touch the bulbs with your fingers, as this will cause blotting.
6. Fully examine the connection of the contact points, ports and the wires as faulty connections can cause lighting problems.
7. Make certain that the end of the bulb does not come in contact with the interior light shield of the headlight when adjusting the bulb.
1. As a safety precaution, make sure that the car has had time to cool down properly before starting the installation process.
2. Put the vehicle into park or make sure it is securely in gear.
3. Be sure to turn off the ignition and remove the key.
4. Be careful to avoid burns, especially when turning on or off the vehicles lighting.
5. Be careful to avoid crushing or cutting the bulbs. Also make sure to not touch the bulbs with your fingers, as this will cause blotting.
6. Fully examine the connection of the contact points, ports and the wires as faulty connections can cause lighting problems.
7. Make certain that the end of the bulb does not come in contact with the interior light shield of the headlight when adjusting the bulb.
Note:
1.We provide clear pictures, measurements where possible. Please check as much as possible to make sure the item is the one that you need.
2.Please allow 0.5-1 inch difference due to manual measurement.(1inch=2.54cm)
3.There are no instructions included in this kit.Professional Installation Is Highly Recommended！
4.This product does not include installation brackets. If needed, please contact us
1.We provide clear pictures, measurements where possible. Please check as much as possible to make sure the item is the one that you need.
2.Please allow 0.5-1 inch difference due to manual measurement.(1inch=2.54cm)
3.There are no instructions included in this kit.Professional Installation Is Highly Recommended！
4.This product does not include installation brackets. If needed, please contact us