Description:

1.The WOYO Slide Hammer Dent puller kit idea for the sheet metal processing, auto body dent removal or hail damage repair.

2.Easy operate to fix ding dent and hail damage repair with lowest expense in convenient way.

3.Use with Cold Glue, not need to heating the glue and waste the time.

4.Auto body tools slide hammer and attachments are for dent pulling, removals, can also pulls out dents in fenders, side panels.

5. This type of cold glue can be reused. When you use it, make sure the dents and your fingers are clean.

About the Cold Glue:

The cole glue is perfect for normal application temperatures below 85°F/30°C.

You can find the temperature suitable for your environment based on experience and multiple trials.

Note:

1. Overheating can cause the glue to melt and not stick tightly, while overcooling can also lead to weak adhesion.

2. Do not heat the glue directly.

Support Dent Shapes:

It only suit for soft and smooth dent without access to the edge.

If you need to repair the dent with access to the edge, you need to use with other assist tool.

Handle Design: Increases Friction

More Convenient to use.

The Steel Tabs and Cold glue are reusable.

The cold glue can be used directly, don't need to waste time to wait for the heating glue.

How to use PDR100 to remove the big dent on the car?

1. Clean the car dent place.

2. Choose the tabs size you need ,and then install it .

3. Clean you hand, Stick cold glue on the tabs after heat the tabs.

4. If your Car body is cold, we suggest you to clean and heat the dent before use the slide hammer.   

5. Start to repair the dent, try serveral times until cannot pull the dent.

6. When the dent can't be pulled up and not been repaired completely.

If the dent still have other shapes or mini dent, need to use other auxiliary PDR tools to repair it.

Like PDR007 / PDR009 / Rods hook / rubber hammer / other PDR kits.

7. After Finishing repairing, remove the cold glue from the tabs, confirm it clean and back to the original glue.

Three Size of the Tabs, suit for many kinds of dent.

Attention: Manual measurement, please allow an error of 1-5mm.

For the new arrival, we will send with the cold glue in the package.

Package list:

Slide Hammer * 1

Steel Tabs * 3

Cold Glue * 1

" Stock Policy:

Please note that we will check the stock availability with the supplier after confirmation of your payment! Most of the time, we are readily available with stock, and the item is dispatched within the committed time frame. In rare cases, we have issues with the supply chain!
Contact us

It will be great pleasure for us to serve you regarding any mishap about your delivery or order. We will try our level best to entertain you at the earliest in the following available timings!

Monday - Friday | 9 AM -6 PM at eBay Message

You will get your response within 24 hours or maybe even before earlier

Please note:

Items may be dispatched from either our UK warehouse or an overseas warehouse depending on stock availability. However, this will not affect the estimated delivery time.

Returns;

We offer a 30-Day Return In Case of Item Damage,Wrong Item,Missing Item,Size Issue etc. Our respectable buyers can avail the facility of a full refund, partial refund or exchange of the item.

Return Address (Important)

Our Return address is different from Shipping address. Return to wrong address won't get refund.

Please send us eBay message before return. We will provide return address.

Please DO NOT use the address on the parcel to return. That address doesn't accept, then no refund

Shop With Confidence....We HOPE to Serve You More !!!"