UHF Wireless Saxophone Microphone System Clip-on Instruments Professional7819
1.UHF Frequency Range: The sax microphone operates within a UHF frequency range of 570-590MHz, a stable and clear audio transmission without interference, ideal for live performances.
2.Selectable Channels: With 16 pre-set selectable channels, this system allows you to easily switch between frequencies, providing flexibility and reliability during performances to avoid signal disruptions.
3.Low Latency Performance: Featuring a latency of less than 6ms, the microphone delivers real-time audio transmission, making it perfect for musicians who require immediate while playing.
4.Long Battery Life: The transmitter and receiver are powered by a rechargeable 3.7V 800mAh battery, offering 6 to 8 hours of continuous usage, extended performance without interruptions.
5.High Sensitivity : With a signal-to-noise ratio 92dB and a frequency response range of 40Hz to 20KHz, this microphone system captures the rich tones of saxophones and brass instruments with exceptional and minimal distortion.
Part Name:Microphone
RECEIVER:
Frequency range: UHF 570-590MHz
Frequency: Pre-set 16 selectable channels
Modulation mode: DQPSK
Latency: Less than 6ms
Frequency response: 40Hz - 20KHz
Total Harmonic Distortion: Less than 0.8%(1KHz)
Signal/noise ratio: 92dB
Receiving sensitivity: -92dBm
Output: 6.35mm Adapter
Power supply: 3.7V 800mah
Power consumption: 6-8hours continuosly using
TRANSMITTER:
Frequency range: UHF 570-590MHz
Modulation mode: DQPSK
Transmitter power: 10mW
Sensitivity: ±3PPM
Frequency change: for IR synch
Microphone type: Condenser
Microphone dimension: Φ14x5.0mm
Power supply: 3.7V 800mah
Power consumption:6-8hours continuously using
Color: As Shown
Material: plastic
Specification:A:One and Two
Package Contents:
2 x transmitters
1 x receiver
1 x charging cable
Specification:B:One to One
Package Contents:
1 x transmitters
1 x receiver
1 x charging cable
Only the above package content, other products are not included.
Note: Light reflection and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.
2.Selectable Channels: With 16 pre-set selectable channels, this system allows you to easily switch between frequencies, providing flexibility and reliability during performances to avoid signal disruptions.
3.Low Latency Performance: Featuring a latency of less than 6ms, the microphone delivers real-time audio transmission, making it perfect for musicians who require immediate while playing.
4.Long Battery Life: The transmitter and receiver are powered by a rechargeable 3.7V 800mAh battery, offering 6 to 8 hours of continuous usage, extended performance without interruptions.
5.High Sensitivity : With a signal-to-noise ratio 92dB and a frequency response range of 40Hz to 20KHz, this microphone system captures the rich tones of saxophones and brass instruments with exceptional and minimal distortion.
Part Name:Microphone
RECEIVER:
Frequency range: UHF 570-590MHz
Frequency: Pre-set 16 selectable channels
Modulation mode: DQPSK
Latency: Less than 6ms
Frequency response: 40Hz - 20KHz
Total Harmonic Distortion: Less than 0.8%(1KHz)
Signal/noise ratio: 92dB
Receiving sensitivity: -92dBm
Output: 6.35mm Adapter
Power supply: 3.7V 800mah
Power consumption: 6-8hours continuosly using
TRANSMITTER:
Frequency range: UHF 570-590MHz
Modulation mode: DQPSK
Transmitter power: 10mW
Sensitivity: ±3PPM
Frequency change: for IR synch
Microphone type: Condenser
Microphone dimension: Φ14x5.0mm
Power supply: 3.7V 800mah
Power consumption:6-8hours continuously using
Color: As Shown
Material: plastic
Specification:A:One and Two
Package Contents:
2 x transmitters
1 x receiver
1 x charging cable
Specification:B:One to One
Package Contents:
1 x transmitters
1 x receiver
1 x charging cable
Only the above package content, other products are not included.
Note: Light reflection and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.
