Bearing Disassembly Puller Inner Hole Puller Removal Tool Three-jaw Set 2023 

Description

The 21 in1 bearing disassembly kit is made of premium #45 steel, which is strong and durable and can well adapt to various work environments. The complete workpieces can suit most bearings. This kit will be a good assistant for you to  improve working efficiency.

Key Features

Strong and Durable: Made of #45 steel with a quenching process, it has high strength, good rigidity, and can resist wear, corrosion, and rust, ensuring a long service life.

Complete Kit: This kit includes 18 bearing pullers, 3 tie rods, 1 multifunction disk, 1 top rod, 3 hooks, 2 gaskets, and other accessories, making disassembly easier and allowing this kit to fit more bearings of different specifications. One set is sufficient for use.

High Performance: The thickened and stiffened workpiece with high torque is hard and resistant to breakage, allowing large pulling forces to remove a wide range of tight and stuck bearings.

Hassle-free Use: You can simply pull out the bearings manually by installing the kit in step-by-step correspondence. Even the novice can get started easily.

A Good Assistant: This internal bearing puller kit with gaskets provides a professional, non-destructive, and easy way to remove bearings that will be your right-hand assistant.

Multiple Sizes: The kit includes six bearing pullers with different sizes that can remove bearings of various shapes and sizes to meet your daily dismantling needs.

Easy to Clean: The smooth surface allows for routine cleaning and maintenance with a damp towel.

Customer Service: We aim to provide quality products and services. If you have any problems, please feel free to contact us. We will reply and solve the problem for you as soon as possible.

Details

Rounded Corners: The bearing pullers and tie rods have round corners rather than sharp ones, which can prevent your hands from being scratched.

Practical ToolBox: The toolbox with suitable grooves allows you to well organize all accessories to avoid losing them. Meanwhile, the recessed handle on the top allows you to easily carry the toolbox.

Application

It fits Kubota, Wade, and Yangma for the bearing disassembly of mechanical harvesters and can be used for vehicle maintenance, mechanical bearings, agricultural machinery, and so on.

Specifications

Color: Black, Silver, Red

Material: #45 Steel

Surface Treatment: Quenching Process

Puller Head: WE1/WE2/WE3/WE4/WE5/WE6

Applicable Bearing: 6005/606/6007/6008/6009/6010/6205/6206/6207/6208/6209/6210/6305/6306/6307/6308/6309/6310

Net Weight: 2.7kg/5.9lbs

Gross Weight: 3kg/6.6lbs

Package Size: 29*23*8cm/11*9*3inch

Toolbox Size: 27*21*6cm/10.6*8*2.6inch

Puller Head Corresponding to Bearing

WE1   6005/606

WE2   6007/6008/6205

WE3   6009/6010/6206

WE4   6207/6208/6305/6306

WE5   6209/6210/6307

WE6   6308/6309/6310

How to Use

• Confirm the model of the removed bearing and select the corresponding puller head specification based on the bearing model.
• Assemble the pull horse head and the pull rod (Please note that all threads at the pull horse head end need to be screwed into the inner hole of the pull rod and locked tightly).
• Use a screwdriver to pry off the bearing cage to expose the ball, and pull the ball to leave gaps at three places at 120 °.
• Insert and rotate the puller head 90 ° at three gaps of 120 ° in order. At this time, the puller head can jam the inner and outer rings of the bearing, thereby confirming that the puller head model is correct.
• Install the multi-functional disk onto the pull rod, and secure the pull rod and the multi-functional disk with nuts. Before locking, continue to confirm that the puller head can fully jam the inner and outer rings of the bearing. If there is any misalignment, slightly rotate the pull rod for adjustment until the nut is fully locked.
• Hold the handle in hand and rotate the ejector pin to allow the tip to enter the center hole of the spindle head, continuing to rotate until the bearing is removed.

Package Included

18* Bearing Pullers

3 * Tie Rods

1 * Multifunction Disk

1 * Top Rod

3 * Hooks

2 * Gaskets

1* Toolbox

Other Accessories

Notes

• This type of inner bore bearing puller cannot be used to disassemble washing machine bearings.
• Please keep the nut downward during installation, which can increase the torque and is convenient for use.
• Please always wear safety glasses (not included) when doing automotive maintenance.
• Please allow the slight color difference caused by the shooting light and 1-3cm error due to manual measurement, and make sure you do not mind before you order.