Wall Mount Bracket for Echo Show 21 15 Alexa Full Motion Tilt Swivel 33Lbs Black
- 1. The product is suitable for Echo show 15 and 13-27 inch displays (devices) and is universal worldwide (country/global);
- 2. The selling point of the product is: 1. Compatibility: compatible with Echo Show 15 and 13-27 inch displays. Maximum weight capacity of 33 lbs
- 3 Adjustable angles: Rotate 360 ° from landscape to portrait, rotate the arm 180 ° left and right, tilt up and down ± 80 °, providing you with the best viewing angle.
- 4. Space saving: Fold up 3.9IN and unfold 17.6IN.
- 5. Sturdy Material: Made of heavy-duty alloy steel material with a frosted surface. Three story structure, with a maximum load-bearing capacity of 33lbs.
- 6 Cable management: 2 movable wire hooks for storing wires.
- Easy to assemble: Wall panels can be installed on any vertical wooden nail, brick, or concrete wall (do not install separately on drywall).
- 7 Product packaging: Includes all accessories.;
- 8. Solved the following pain points:
- Space saving: Fold up 3.9IN and unfold 17.6IN.
- Adjustable angles: Rotate 360 ° from landscape to portrait, rotate the arm 180 ° left and right, tilt up and down ± 80 °, providing you with the best viewing angle.
- Suitable for all groups of people to use in kitchen, living room, and office scenes;
Product common problems
- What is the range of extension and contraction of this bracket arm?
- Answer: Its arms can be folded up to 3.9 inches or extended up to 17 inches, which can save space.
- Does this bracket support rotation in all directions?
- Answer: Supports 360 ° center rotation, around 180 ° rotation, and+80 °/-80 ° forward and backward tilt, which is flexible enough
- Can the tightness of this bracket be adjusted?
- Answer: Yes, it is adjustable.
1. Adjust the extension tightness of the bracket: Use an L-shaped hex wrench to tighten one side bolt, and use an open-end wrench to adjust the other side nut. (Note: If only one wrench is used to adjust without fixing with another wrench, the adjustment will fail)
2. Adjust the tightness of Show 15 360 ° rotation: Use the open-end wrench provided in the outer packaging to adjust the screw on the center bracket.
Installation method
- 1. Drill holes in the wall according to the installation holes of the bracket at the appropriate position, and fix the bracket to the wall with screws;
- 2. Fix the equipment on the bracket with screws;
- 3.If you feel that the support arm is too loose when rotating, you can tighten it according to your needs.
Packaging includes and specifications
- 1. Wall bracket * 1
- 2. Instruction manual * 1
- 3. Self tapping screws * 2
- 4. Screw plug * 2
- 5. M4 gasket * 4
- 6. M6 gasket * 4
- 7. M8 gasket * 2
- 8. M4 * 16 screws * 4
- 9. M5 * 16 screws * 4
- 10. Plastic gasket * 4
- 11. Hexagonal wrench L-shaped * 1
- 12. Open wrench * 1