Pneumatic Stapler Gun Nail Gun Nail Driver CN100 CN130 Nail Gun
Nailing Operations
1. Connect to air source
2. Aim the nozzle directly at the workpiece and press the trigger to fire
3. Do not fire without nails (when magazine is empty) to prevent damage to firing pin components
4. Do not fire into the air to avoid injury
Maintenance
1. Before use, apply 1-2 drops of lubricant into the air fitting to maintain internal component lubrication, enhance efficiency, and extend tool life.
2. Keep the magazine and nozzle interior/exterior clean, free of debris or adhesive.
3. Do not disassemble the tool arbitrarily to prevent damage.
4. If the tool malfunctions, seek maintenance at the retailer where purchased.
Safety Guidelines
1. Read the instruction manual carefully before using the tool.
2. Wear safety goggles and ear protection to ensure safety.
3. Ensure operating air pressure remains below 8 kgf/cm².
4. Never point the nozzle toward your body to prevent injury.
5. Do not use oxygen, gas, or other flammable/explosive gases as the tool's power source.
6. Select the correct nail size to prevent jamming and tool damage.
7. Do not pull the trigger while loading nails.
8. When the tool is not in use or undergoing maintenance, always disconnect the air hose and remove any unspent nails from the magazine.
Nailing Operations
1. Connect to air source
2. Aim the nozzle directly at the workpiece and press the trigger to fire
3. Do not fire without nails (when magazine is empty) to prevent damage to firing pin components
4. Do not fire into the air to avoid injury
Maintenance
1. Before use, apply 1-2 drops of lubricant into the air fitting to maintain internal component lubrication, enhance efficiency, and extend tool life.
2. Keep the magazine and nozzle interior/exterior clean, free of debris or adhesive.
3. Do not disassemble the tool arbitrarily to prevent damage.
4. If the tool malfunctions, seek maintenance at the retailer where purchased.
1. Read the instruction manual carefully before using the tool.
2. Wear safety goggles and ear protection to ensure safety.
3. Ensure operating air pressure remains below 8 kgf/cm².
4. Never point the nozzle toward your body to prevent injury.
5. Do not use oxygen, gas, or other flammable/explosive gases as the tool's power source.
6. Select the correct nail size to prevent jamming and tool damage.
7. Do not pull the trigger while loading nails.
8. When the tool is not in use or undergoing maintenance, always disconnect the air hose and remove any unspent nails from the magazine.